scholarly journals Adsorption of chlortetracycline onto biochar derived from corn cob and sugarcane bagasse

2018 ◽  
Vol 78 (6) ◽  
pp. 1336-1347 ◽  
Author(s):  
Lin Zhang ◽  
Lei Tong ◽  
Pengguang Zhu ◽  
Peng Huang ◽  
Zhengyu Tan ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Adsorption Kinetics ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Corn Cob ◽  
Alternative Materials ◽  
Pseudo Second Order ◽  
Kinetics And Isotherms ◽  
Better Than

Abstract Biochar was prepared from two different types of biological waste materials, corn cob (CC) and sugarcane bagasse (SB). The adsorption capacity of each class of adsorbent was determined by chlortetracycline (CTC) adsorption tests. The adsorption kinetics and isotherms of chlortetracycline onto sugarcane bagasse biochar (SBB) and corn cob biochar (CCB) were studied. Experimental results indicated that pseudo-second-order adsorption kinetics of CTC onto SBB and CCB were more reasonable than pseudo-first-order kinetics, and the adsorption kinetic model of CTC onto SBB was slightly better than that onto CCB. The maximum adsorption capacity of CTC onto SBB was 16.96 mg/g at pH 4, while the highest adsorption efficiency of CTC onto CCB was achieved at pH 5 with a maximum adsorption of 12.39 mg/g. The Freundlich isotherm model was better than the Langmuir model at illustrating the adsorption process of CTC onto SBB and CCB. These results provide a way to understand the value of specific biochars, which can be used as efficient and effective adsorbents for CTC removal from waste-water. Compared with raw pinewood, SBB and CBB were considered as alternative materials to remove antibiotics from aqueous environments.

scholarly journals Development of Natural Cation Exchanger for the Treatment of Lead ions from Aqueous Solution

2013 ◽  
Vol 29 ◽  
pp. 34-43
Author(s):  
Puspa Lal Homagai
Keyword(s):  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Active Sites ◽  
Freundlich Isotherm ◽  
Saccharum Officinarum ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Fast Kinetics ◽  
Pseudo Second Order

Cellulose, hemicelluloses and lignin are the main constituents found in sugarcane (Saccharum officinarum) bagasse having many surface active sites containing hydroxyl and/or phenolic groups which are effective for chemical modification. The biowaste was first charred with concentrated sulphuric acid and then the charred aminated sugarcane bagasse (CASB) was prepared by reduction followed by oxidation. The developed bio-sorbent was characterized by SEM, TGA/DTA, FTIR and elemental analysis. Batch adsorption methods were carried out to determine Pb+2 sorption capacities at different pH ranges and sorbate concentrations. The maximum adsorption capacity for Pb+2 was found to be 323 mg g-1 with an efficiency of 98% at pH 4.The experimental data showed a good fit to Langmuir isotherm as compared to Freundlich isotherm models. The kinetics was best fitted with the pseudo-second order model. The adsorption equilibrium was attained within 20 min. The high adsorption capacity and fast kinetics results of the charred aminated sugarcane bagasse indicated that it might be potential adsorbent for the removal of lead from contaminated water. DOI: http://dx.doi.org/10.3126/jncs.v29i0.9235Journal of Nepal Chemical SocietyVol. 29, 2012Page: 34-43Uploaded date : 12/3/2013

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

scholarly journals Self-Regeneration Hybrid Hydrogel for Bisphenol A Adsorption in Water

2021 ◽  
Author(s):  
Mingyue Piao ◽  
Hongxue Du ◽  
Yuwei Sun ◽  
Honghui Teng
Keyword(s):  
Bisphenol A ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Significant Loss ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Hybrid Hydrogel ◽  
Polyethylene Glycol Diacrylate ◽  
Glycol Diacrylate ◽  
Pseudo Second Order

Abstract Hybrid hydrogel was synthesized by immobilizing TiO2 in polyethylene glycol diacrylate (TiO2@PEGDA) as an efficient adsorbent with photocatalysis property for bisphenol A (BPA) elimination. TiO2@PEGDA exhibited spherical and rough structure with limited crystallinity and abundant functional groups. The contact angle was 61.96°, indicating that TiO2@PEGDA is hydrophilic. The swelling capacity of TiO2@PEGDA (9.0%) was decreased compared with pristine PEGDA (15.6%). Adsorption results demonstrated that the maximum adsorption capacity of TiO2@PEGDA (101.4 mg/g) for BPA was slightly higher than pristine PEGDA (97.68 mg/g). The adsorption capacity was independent with pH at pH ＜ 8.0, and decreased obviously when the value of pH was higher than 8.0. The adsorption behavior was fitted well with the pseudo-second-order kinetic and the Freundlich isotherm model. Both ΔG0 and ΔH0 were negative, indicating that BPA adsorbed on TiO2@PEGDA was an exothermic and spontaneous process. Regeneration study was performed by photocatalysis, and the adsorption capacity was 85.6% compared with the initial capacity after four cycles of illumination, indicating that TiO2@PEGDA could be recycled without significant loss of adsorption capacity. Consequently, TiO2@PEGDA can serve as an eco-friendly and promising material for efficiently adsorbing BPA with self-clean property.

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

scholarly journals Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

2020 ◽  
Vol 7 (3) ◽  
pp. 191811
Author(s):  
Yazhen Wang ◽  
Shuang Li ◽  
Liqun Ma ◽  
Shaobo Dong ◽  
Li Liu
Keyword(s):  
Adsorption Capacity ◽  
Potassium Hydroxide ◽  
Adsorption Process ◽  
Hydroxylamine Hydrochloride ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Corn Stalk ◽  
Order Model ◽  
Adsorption Performance ◽  
Pseudo Second Order

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH 2 OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g –1 and 94.72 mg g −1 , and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

Adsorptive Removal of Drimarene Brilliant Blue by Thermo Stable, Eco-friendly Graphene Oxide Reinforced Polyvinyl Alcohols Hydrogels With High Reusability Potential

2021 ◽  
Author(s):  
Adeel Mustafa ◽  
Nazia Yaqoob ◽  
Maheen Almas ◽  
Shagufta Kamal ◽  
Khalid Mahmood Zia ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Thermo Gravimetric Analysis ◽  
Freundlich Isotherm ◽  
Brilliant Blue ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Pseudo Second Order

Abstract In this study graphene oxide (GO) reinforced polyvinyl alcohol (PVA) composites hydrogels were synthesized and used as efficient adsorbents for Drimarene Brilliant Blue K-4BL. GO nanoparticles (NPs) were synthesized by modified Hummer’s method. The composites were characterized by Fourier transform infrared spectroscopy (FT-IR), Thermo-gravimetric analysis (TGA), Scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed homogeneous dispersion of reinforcement in the synthesized composites. Moreover thermal stability of the composites was significantly enhanced by the addition of graphene oxide nanoparticles. The synthesized composites were used for the removal of Drimarene brilliant Blue from model waste water. The effect of pH, content of GONPs and initial concentration of Drimarene Brilliant Blue K-4BL on the adsorption capacity of synthesized GO/PVA composites were investigated. The equilibrium isothermal data were studied by applying Langmuir and Freundlich isotherm models. Results demonstrated that the adsorption process is well described by the Langmuir adsorption isotherm. According to the Langmuir model, maximum adsorption capacity i.e. 32mg/g was obtained at 0.7% GO/PVA composite. From the kinetic study it was concluded that pseudo-second-order model is the best fitted. Synthesized composites showed excellent reusability (almost 95 %) for the adsorption of Drimarene Brilliant Blue K-4BL after four successive cycles of adsorption and desorption. Thus, the GO/PVA composites demonstrated a great potential in terms of cost effectiveness, efficiency and reusability for the removal of Drimarene Brilliant Blue K-4BL dye.

scholarly journals Preparation of ureido-functionalized PVA/silica mesoporous fibre membranes via electrospinning for adsorption of Pb2+ and Cu2+ in wastewater

2017 ◽  
Vol 76 (9) ◽  
pp. 2526-2534 ◽  
Author(s):  
Meimei Zhou ◽  
Weizhen Tang ◽  
Pingping Luo ◽  
Jiqiang Lyu ◽  
Aixia Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Abstract Ureido-functionalized mesoporous polyvinyl alcohol/silica composite nanofibre membranes were prepared by electrospinning technology and their application for removal of Pb2+ and Cu2+ from wastewater was discussed. The characteristics of the membranes were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption analysis. Results show that the membranes have long fibrous shapes and worm-like mesoporous micromorphologies. Fourier transform infrared spectroscopy confirmed the membranes were successfully functionalized with ureido groups. Pb2+ and Cu2+ adsorption behavior on the membranes followed a pseudo-second-order nonlinear kinetic model with approximately 30 minutes to equilibrium. Pb2+ adsorption was modelled using a Langmuir isotherm model with maximum adsorption capacity of 26.96 mg g−1. However, Cu2+ adsorption was well described by a Freundlich isotherm model with poor adsorption potential due to the tendency to form chelating complexes with several ureido groups. Notably, the membranes were easily regenerated through acid treatment, and maintained adsorption capacity of 91.87% after five regeneration cycles, showing potential for applications in controlling heavy metals-related pollution and metals reuse.

scholarly journals Selective recovery of platinum from spent autocatalyst solution by thiourea modified magnetic biocarbons

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shao-Yi Lo ◽  
Wahid Dianbudiyanto ◽  
Shou-Heng Liu
Keyword(s):  
Adsorption Capacity ◽  
Noble Metals ◽  
Freundlich Isotherm ◽  
Platinum Group Metals ◽  
Rapid Decline ◽  
Maximum Adsorption Capacity ◽  
Mixed Solution ◽  
Batch Tests ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm

AbstractThe precious platinum group metals distributed in urban industrial products should be recycled because of their rapid decline in the contents through excessive mining. In this work, thiourea modified magnetic biocarbons are prepared via an energy-efficient microwave-assisted activation and assessed as potential adsorbents to recover platinum ions (i.e., Pt(IV)) from dilute waste solution. The physicochemical properties of prepared biocarbons are characterized by a series of spectroscopic and analytic instruments. The adsorption performance of biocarbons is carried out by using batch tests. Consequently, the maximum adsorption capacity of Pt(IV) observed for adsorbents is ca. 42.8 mg g−1 at pH = 2 and 328 K. Both adsorption kinetics and isotherm data of Pt(IV) on the adsorbents are fitted better with non-linear pseudo second-order model and Freundlich isotherm, respectively. Moreover, the thermodynamic parameters suggest that the Pt(IV) adsorption is endothermic and spontaneous. Most importantly, the adsorbents exhibit high selectivity toward Pt(IV) adsorption and preserve ca. 96.9% of adsorption capacity after six cyclic runs. After adsorption, the regeneration of the prepared adsorbents can be effectively attained by using 1 M thiourea/2% HCl mixed solution as an eluent. Combined the data from Fourier transform infrared and X-ray photoelectron spectroscopies, the mechanisms for Pt(IV) adsorption are governed by Pt–S bond between Pt(IV) and thiourea as well as the electrostatic attraction between anionic PtCl62− and cationic functional groups of adsorbents. The superior Pt(IV) recovery and sustainable features allow the thiourea modified magnetic biocarbon as a potential adsorbent to recycle noble metals from spent autocatalyst solution.

scholarly journals Process Optimization and Adsorptive Mechanism for Reactive Blue 19 Dye by Magnetic Crosslinked Chitosan/MgO/Fe3O4 Biocomposite

2021 ◽  
Author(s):  
Ali H. Jawad ◽  
Rangabhashiyam S ◽  
Ahmed Saud Abdulhameed ◽  
Syed Shatir A. Syed-Hassan ◽  
Zeid A. ALOthman ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Textile Dye ◽  
Adsorption Parameters ◽  
Solution Ph ◽  
Equilibrium Study ◽  
Reactive Blue 19 ◽  
Pseudo Second Order ◽  
Adsorptive Mechanism

Abstract A new biocomposite magnetic crosslinked glutaraldehyde-chitosan/MgO/Fe3O4 (CTS-GL/MgO/Fe3O4) adsorbent was prepared and applied for the removal of reactive blue 19 (RB 19) synthetic textile dye. The prepared CTS-GL/MgO/Fe3O4 was subjected to the several instrumental characterizations such as XRD, FTIR, SEM-EDX, pH-potentiometric titration, and pHpzc analyses. The influence of the input adsorption parameters such as A: CTS-GL/MgO/Fe3O4 dosage, B: initial solution pH, C: process temperature, and D: contact time on RB 19 removal efficiency was statistically optimized using Box-Behnken design (BBD). The analysis of variance (ANOVA) indicates the presence of five significant statistical interactions between input adsorption parameters i.e. (AB, AC, AD, BC, and BD). The adsorption kinetic and equilibrium study reveals a good to the pseudo-second-order model, and multilayer adsorption as proven by Freundlich isotherm model, respectively. The maximum adsorption capacity of CTS-GL/MgO/Fe3O4 towards RB19 was found to be 193.2 mg/g at 45 ºC. This work highlights the development of feasible and recoverable magnetic biocompsite adsorbent with desirable adsorption capacity towards textile dyes with good separation ability by using an external magnetic field.

scholarly journals Kinetic, isotherm, and thermodynamic studies of the adsorption of dyes from aqueous solution by cellulose-based adsorbents

2018 ◽  
Vol 77 (11) ◽  
pp. 2699-2708 ◽  
Author(s):  
Yixi Wang ◽  
Linyan Zhao ◽  
Juan Hou ◽  
Huili Peng ◽  
Jianning Wu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Langmuir Isotherm ◽  
Textile Wastewater ◽  
Entropy Change ◽  
Order Kinetic ◽  
Thermodynamic Studies ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetics And Isotherms

Abstract In this study, a highly efficient and eco-friendly porous cellulose-based aerogel was synthesized by grafting polyethyleneimine onto quaternized cellulose (PQC) to remove the anionic dye Congo Red (CR). The prepared aerogel had a good flexibility and formability. The adsorbents were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and elemental analysis. The results showed that there were many amino groups on CE/PQC aerogel and the structure was porous, which increased the adsorption capacity. The effects of initial concentration, adsorbent dose, contact time, temperature, and pH on the dye sorption were all investigated. The adsorption mechanism was also explored, including adsorption kinetics, adsorption isotherms and thermodynamic studies of adsorption. The results showed that the adsorption kinetics and isotherms fitted the pseudo-second-order kinetic model and Langmuir isotherm, respectively. The Langmuir isotherm revealed that the maximum theoretical adsorption capacity of the aerogels for CR was 518.403 mg g−1. The thermodynamic parameters including Gibbs free energy change (ΔG0), enthalpy change (ΔH0) and entropy change (ΔS0), showed the adsorption process was exothermic and spontaneous. These results imply that this new absorbent can be universally and effectively used for the removal of dyes from industrial textile wastewater.

Sign in / Sign up

Export Citation Format

Share Document