scholarly journals Ni(II) and Cu(II) removal from aqueous solution by a heavy metal-resistance bacterium: kinetic, isotherm and mechanism studies

2017 ◽  
Vol 76 (4) ◽  
pp. 859-868 ◽  
Author(s):  
Haikun Zhang ◽  
Xiaoke Hu ◽  
Hong Lu
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Photoelectron Spectroscopy ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Dual Model ◽  
X Ray ◽  
Biosorption Process ◽  
Before And After ◽  
Acinetobacter Sp

The potentiality of a heavy metal-resistance bacterium Acinetobacter sp. HK-1 for removing Ni(II) and Cu(II) ions from aqueous solution and the biosorption mechanism were investigated in this study. The effects of pH, contact time and Ni(II)/Cu(II) concentration on the adsorption process were evaluated and the maximum biosorption capacity of strain HK-1 was found to be 56.65 mg/g for Ni(II) and 157.2 mg/g for Cu(II), respectively. The experimental kinetic data fit well with the pseudo-second-order model (R2 > 0.98) and the biosorption process was best explained by the Langmuir-Freundlich dual model (R2 > 0.97). The morphologies of HK-1 before and after adsorption in a Ni(II)/Cu(II) supplemented system were compared using a scanning electron microscope. After adsorption, the valence state of Ni(II)/Cu(II) was not changed and the formation of nickel/copper phosphate was observed using X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The results of Fourier transform infrared spectroscopy and XPS further indicated that amine, phosphate and carboxyl groups were involved in the biosorption process. Cu(II) biosorption by Acinetobacter sp. was firstly reported. Based on the above results, it can be concluded that Acinetobacter sp. HK-1 has a promising application in Ni(II) and Cu(II) ion removal from industrial wastewater.

scholarly journals Synthesis of Nanoscale Zerovalent Iron (nZVI) Supported on Biochar for Chromium Remediation from Aqueous Solution and Soil

2019 ◽  
Vol 16 (22) ◽  
pp. 4430 ◽  
Author(s):  
Haixia Wang ◽  
Mingliang Zhang ◽  
Hongyi Li
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Zero Valent Iron ◽  
Zerovalent Iron ◽  
X Ray ◽  
Nanoscale Zerovalent Iron ◽  
Before And After ◽  
Pseudo Second Order ◽  
Xrd Patterns ◽  
Co Precipitation

Maize straw biochar-supported nanoscale zero-valent iron composite (MSB-nZVI) was prepared for efficient chromium (Cr) removal through alleviating the aggregation of zero-valent iron particles. The removal mechanism of MSB-nZVI was investigated by scanning electron microscopy with energy dispersive X-ray (SEM-EDX), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). Cr(VI) removal from aqueous solution by MSB-nZVI was greatly affected by pH and initial concentration. The removal efficiency of Cr(VI) decreased with increasing pH, and the removal kinetics followed the pseudo-second-order model. XRD patterns of MSB-nZVI before and after reaction showed that reduction and precipitation/co-precipitation (FeCr2O4, Fe3O4, Fe2O3) occurred with the conversion of Cr(VI) to Cr(III) and Fe(0) to Fe(II)/Fe(III). The produced precipitation/co-precipitation could be deposited on the MSB surface rather than being only coated on the surface of nZVI particles, which can alleviate passivation of nZVI. For remediation of Cr(VI)-contaminated saline–alkali soil (pH 8.6–9.0, Cr 341 mg/kg), the released amount of Cr(VI) was 70.7 mg/kg, while it sharply decreased to 0.6–1.7 mg/kg at pH 4.0–8.0, indicating that the saline–alkali environment inhibited the remediation efficiency. These results show that MSB-nZVI can be used as an effective material for Cr(VI) removal from aqueous solution and contaminated soil.

Mechanisms of cadmium resistance in anaerobic bacterial enrichments degrading pentachlorophenol

2003 ◽  
Vol 49 (7) ◽  
pp. 418-424 ◽  
Author(s):  
S R Kamashwaran ◽  
Don L Crawford
Keyword(s):  
Heavy Metal ◽  
Cadmium Sulfide ◽  
Electron Micrographs ◽  
Enrichment Culture ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Cadmium Resistance ◽  
Equal Concentration ◽  
X Ray ◽  
Transmission Electron

The mechanisms of heavy-metal resistance used by adapted sulfidogenic and methanogenic enrichments degrading pentachlorophenol in the presence of cadmium (Cd) were studied. The enrichment cultures adapted to and readily tolerated bioavailable Cd concentrations up to 50 ppm while degrading an equal concentration of pentachlorophenol. Both cultures removed >95% of the Cd from solution. Transmission electron micrographs revealed (i) the presence of electron-dense particles surrounding the cells in the sulfidogenic enrichments and (ii) the unusual clumping of cells and the presence of an exopolymer in the methanogenic enrichments. Energy dispersive X-ray analysis showed that the sulfidogenic enrichments removed Cd by extracellular precipitation of cadmium sulfide, while the methanogenic enrichment culture removed Cd by extracellular sequestration of Cd into the exopolymer.Key words: cadmium, pentachlorophenol, sulfidogenic, methanogenic, resistance.

Copper-Zinc-Titania Nanocomposite as Catalyst for CO2 Photo-Reduction: A Surface Deactivation Study

2014 ◽  
Vol 896 ◽  
pp. 134-140 ◽  
Author(s):  
Oman Zuas ◽  
Yuni Krisyuningsih Krisnandi ◽  
Widayanti Wibowo ◽  
Jin Seog Kim ◽  
Jarnuzi Gunlazuardi
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Surface Condition ◽  
Surface Conditions ◽  
X Ray ◽  
Before And After ◽  
Copper Zinc ◽  
Deactivation Process ◽  
Scanning Electron

In this paper, a surface deactivation study of Cu1.0-Zn0.5-Ti98.5 oxide nanocomposite (CZT-ONC) as catalyst for photo-reduction of CO2 in aqueous solution is reported. The photo-reduction experiments were conducted through five experimental cycles. The results demonstrated that the activity of the CZT-ONC decreased by increasing the number of testing cycle. The causes for declining the activity of the CZT-ONC catalyst was studied by investigating the surface condition of the catalyst before and after used by mean X-ray photoelectron spectroscopy (XPS) and field emission-scanning electron spectroscopy (FE-SEM) techniques and the results are discussed. It was found that the surface conditions (chemical state of the elements and morphology) of the CZT-ONC catalyst have been critically altered. Change in surface condition pointed that the deactivation process on the surface of the CZT-ONC was occurred and it could be considered to be the reasons for declining of the activity.

scholarly journals Heavy Metal Tolerance Trend in Extended-Spectrum β-Lactamase Encoding Strains Recovered from Food Samples

2021 ◽  
Vol 18 (9) ◽  
pp. 4718
Author(s):  
Kashaf Junaid ◽  
Hasan Ejaz ◽  
Iram Asim ◽  
Sonia Younas ◽  
Humaira Yasmeen ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Tolerance ◽  
Heavy Metal Tolerance ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Food Samples ◽  
Esbl Production ◽  
Extended Spectrum ◽  
Retail Food ◽  
Esbl Producers

This study evaluates bacteriological profiles in ready-to-eat (RTE) foods and assesses antibiotic resistance, extended-spectrum β-lactamase (ESBL) production by gram-negative bacteria, and heavy metal tolerance. In total, 436 retail food samples were collected and cultured. The isolates were screened for ESBL production and molecular detection of ESBL-encoding genes. Furthermore, all isolates were evaluated for heavy metal tolerance. From 352 culture-positive samples, 406 g-negative bacteria were identified. Raw food samples were more often contaminated than refined food (84.71% vs. 76.32%). The predominant isolates were Klebsiella pneumoniae (n = 76), Enterobacter cloacae (n = 58), and Escherichia coli (n = 56). Overall, the percentage of ESBL producers was higher in raw food samples, although higher occurrences of ESBL-producing E. coli (p = 0.01) and Pseudomonas aeruginosa (p = 0.02) were observed in processed food samples. However, the prevalence of ESBL-producing Citrobacter freundii in raw food samples was high (p = 0.03). Among the isolates, 55% were blaCTX-M, 26% were blaSHV, and 19% were blaTEM. Notably, heavy metal resistance was highly prevalent in ESBL producers. These findings demonstrate that retail food samples are exposed to contaminants including antibiotics and heavy metals, endangering consumers.

scholarly journals Synthesis of Novel Arginine-Based Flame Retardant and Its Application in Lyocell Fabric

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3588
Author(s):  
Jiayi Chen ◽  
Yansong Liu ◽  
Jiayue Zhang ◽  
Yuanlin Ren ◽  
Xiaohui Liu
Keyword(s):  
Fourier Transform ◽  
Heat Release ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Fourier Transform Infrared ◽  
Ftir Analysis ◽  
Excellent Thermal Stability ◽  
X Ray ◽  
Cone Calorimeter Test ◽  
Before And After

Lyocell fabrics are widely applied in textiles, however, its high flammability increases the risk of fire. Therefore, to resolve the issue, a novel biomass-based flame retardant with phosphorus and nitrogen elements was designed and synthesized by the reaction of arginine with phosphoric acid and urea. It was then grafted onto the lyocell fabric by a dip-dry-cure technique to prepare durable flame-retardant lyocell fabric (FR-lyocell). X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated that the flame retardant was successfully introduced into the lyocell sample. Thermogravimetric (TG) and Raman analyses confirmed that the modified lyocell fabric featured excellent thermal stability and significantly increased char residue. Vertical combustion results indicated that FR-lyocell before and after washing formed a complete and dense char layer. Thermogravimetric Fourier-transform infrared (TG-FTIR) analysis suggested that incombustible substances (such as H2O and CO2) were produced and played a significant fire retarding role in the gas phase. The cone calorimeter test corroborated that the peak of heat release rate (PHRR) and total heat release (THR) declined by 89.4% and 56.4%, respectively. These results indicated that the flame retardancy of the lyocell fabric was observably ameliorated.

scholarly journals Genome-Driven Discovery of Enzymes with Industrial Implications from the Genus Aneurinibacillus

2021 ◽  
Vol 9 (3) ◽  
pp. 499
Author(s):  
Majid Rasool Kamli ◽  
Nada A. Y. Alzahrani ◽  
Nahid H. Hajrah ◽  
Jamal S. M. Sabir ◽  
Adeel Malik
Keyword(s):  
Heavy Metal ◽  
Enzyme Activities ◽  
Heavy Metal Resistance ◽  
Industrial Applications ◽  
Metal Resistance ◽  
The Family ◽  
Antiviral Activities ◽  
Genome Level ◽  
Genome Analyses ◽  
Unique Species

Bacteria belonging to the genus Aneurinibacillus within the family Paenibacillaceae are Gram-positive, endospore-forming, and rod-shaped bacteria inhabiting diverse environments. Currently, there are eight validly described species of Aneurinibacillus; however, several unclassified species have also been reported. Aneurinibacillus spp. have shown the potential for producing secondary metabolites (SMs) and demonstrated diverse types of enzyme activities. These features make them promising candidates with industrial implications. At present, genomes of 9 unique species from the genus Aneurinibacillus are available, which can be utilized to decipher invaluable information on their biosynthetic potential as well as enzyme activities. In this work, we performed the comparative genome analyses of nine Aneurinibacillus species representing the first such comprehensive study of this genus at the genome level. We focused on discovering the biosynthetic, biodegradation, and heavy metal resistance potential of this under-investigated genus. The results indicate that the genomes of Aneurinibacillus contain SM-producing regions with diverse bioactivities, including antimicrobial and antiviral activities. Several carbohydrate-active enzymes (CAZymes) and genes involved in heavy metal resistance were also identified. Additionally, a broad range of enzyme classes were also identified in the Aneurinibacillus pan-genomes, making this group of bacteria potential candidates for future investigations with industrial applications.

scholarly journals Retromobilization of heavy metal resistance genes in unpolluted and heavy metal polluted soil

1995 ◽  
Vol 18 (3) ◽  
pp. 191-203 ◽  
Author(s):  
Eva M. Top ◽  
Helene Rore ◽  
Jean-Marc Collard ◽  
Veerle Gellens ◽  
Galina Slobodkina ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Resistance Genes ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Polluted Soil

Oxidation of Alloy-X in Subcritical, Transition, and Supercritical Water

CORROSION ◽  
10.5006/3881 ◽  
2021 ◽  
Author(s):  
Zachary Karmiol ◽  
Dev Chidambaram
Keyword(s):  
Supercritical Water ◽  
Photoelectron Spectroscopy ◽  
Focused Ion Beam ◽  
Elevated Temperatures ◽  
Subcritical Water ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Based Superalloy ◽  
Before And After

This work investigates the oxidation of a nickel based superalloy, namely Alloy X, in water at elevated temperatures: subcritical water at 261°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water at 380°C and 27 MPa for 100 hours. The morphology of the sample surfaces were studied using scanning electron microscopy coupled with focused ion beam milling, and the surface chemistry was investigated using X-ray diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy before and after exposure studies. Surfaces of all samples were identified to comprise of a ferrite spinel containing aluminum.

X-ray photoemission studies of the interaction of metals and metal ions with DNA

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Esha Mishra ◽  
Subrata Majumder ◽  
Shikha Varma ◽  
Peter A. Dowben
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Conformational Changes ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Surface Sensitivity ◽  
Metal Interaction ◽  
The Status ◽  
Sensitivity And Selectivity ◽  
Insight Into

Abstract X-ray Photoelectron Spectroscopy (XPS) has been used to study the interactions of heavy metal ions with DNA with some success. Surface sensitivity and selectivity of XPS are advantageous for identifying and characterizing the chemical and elemental structure of the DNA to metal interaction. This review summarizes the status of what amounts to a large part of the photoemission investigations of biomolecule interactions with metals and offers insight into the mechanism for heavy metal-bio interface interactions. Specifically, it is seen that metal interaction with DNA results in conformational changes in the DNA structure.

Sign in / Sign up

Export Citation Format

Share Document