scholarly journals Effect of hydroxypropyl cellulose (HPC), polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) on Nd-TiO2/graphene oxide nanocomposite for removal of lead(II) and copper(II) from aquatic media

2017 ◽  
Vol 76 (1) ◽  
pp. 15-27 ◽  
Author(s):  
Susan Samadi ◽  
Sayed Mohammad Hosain Mirseyfifard ◽  
Mina Assari ◽  
Marzieh Hassannejad
Keyword(s):  
Graphene Oxide ◽  
Polyethylene Glycol ◽  
Removal Efficiency ◽  
Hydroxypropyl Cellulose ◽  
Considerable Effect ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
X Ray ◽  
Anatase Titania ◽  
Maximum Removal

In order to investigate the effect of hydroxypropyl cellulose (HPC), polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) on adsorbing capacity of nanosorbent Nd-TiO2/GO, Nd-TiO2/HPC/GO, Nd-TiO2/PVP/GO and Nd-TiO2/PEG/GO nanocomposites were synthesized. Studies by Fourier transform infrared spectroscopy confirmed the expected structure and X-ray diffraction results confirmed the formation of crystalline phase of anatase titania and also graphene oxide (GO). Scanning electron microscopy pictures and energy dispersive X-ray spectroscopy analysis showed the formation of Nd-TiO2 nanoparticles. These nanocomposites were used for removal of lead(II) and copper(II) from water and the effective factors on removal were optimized. The results showed that the maximum removal for all three nanocomposites was at pH = 7. The amount of adsorbent and contact time for Nd-TiO2/HPC/GO and Nd-TiO2/PVP/GO nanocomposites was equal to 0.02 g and 20 minutes respectively, but they were equal to 0.01 g and 15 minutes for Nd-TiO2/PEG/GO nanocomposite. Investigating the effect of interfering ions showed they had no considerable effect on removal efficiency. In order to investigate the effect of photocatalytic activity in optimal conditions and in the presence of visible–ultraviolet light, the removal process was performed. The results showed an increase in removal efficiency. Furthermore, the ability of synthesized nanosorbents to decompose organic compounds available in water was confirmed and their energy band gaps were calculated.

scholarly journals Attached β-cyclodextrin/γ-(2,3-epoxypropoxy) propyl trimethoxysilane to graphene oxide and its application in copper removal

2017 ◽  
Vol 75 (10) ◽  
pp. 2403-2411 ◽  
Author(s):  
Zongxue Yu ◽  
Qi Chen ◽  
Liang Lv ◽  
Yang Pan ◽  
Guangyong Zeng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
High Surface ◽  
High Surface Area ◽  
Esterification Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cavity Structure ◽  
Optimum Ph ◽  
Exchange Adsorption ◽  
Langmuir Isotherm Model

The environmental applications of graphene oxide and β-cyclodextrin (β-CD) have attracted great attention since their first discovery. Novel nanocomposites were successfully prepared by using an esterification reaction between β-cyclodextrin/γ-(2,3-epoxypropoxy) propyl trimethoxysilane grafted graphene oxide (β-CD/GPTMS/GO). The β-CD/GPTMS/GO nanocomposites were used to remove the Cu2+ from aqueous solutions. The characteristics of β-CD/GPTMS/GO were detected by scanning electron microscopy (SEM), Fourier transform infrared, X-ray diffraction (XRD), thermogravimetric analysis (TG) and energy dispersive X-ray (EDX). The dispersibility of graphene oxide was excellent due to the addition of β-CD. The adsorption isotherms data obtained at the optimum pH 7 were fitted by Langmuir isotherm model. The excellent adsorption properties of β-CD/GPTMS/GO for Cu2+ ions could be attributed to the apolar cavity structure of β-CD, the high surface area and abundant functional groups on the surface of GO. The adsorption patterns of β-CD/GPTMS/GO were electrostatic attraction, formation of host-guest inclusion complexes and the ion exchange adsorption. The efficient adsorption of β-CD/GPTMS/GO for Cu2+ ions suggested that these novel nanocomposites may be ideal candidates for removing other cation pollutants from waste water.

Effect of NABr on the Pore Size and Surface Morphology of Cu Foam Prepared by Hydrogen Bubble Templating

2021 ◽  
Vol 880 ◽  
pp. 83-88
Author(s):  
Mary Donnabelle L. Balela ◽  
Reginald E. Masirag ◽  
Francis O. Pacariem Jr. ◽  
Juicel Marie D. Taguinod
Keyword(s):  
Polyethylene Glycol ◽  
Cuprous Oxide ◽  
Active Material ◽  
Current Collector ◽  
Hydrogen Bubble ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Foam ◽  
Interconnected Pores

Binderless supercapacitor electrodes are currently being employed to increase the surface contact between the active material and current collector, leading to enhanced capacitance. In binderless electrodes, the active material is directly grown on the surface of the current collector, omitting the use of insulative polymer-based binders. In this work, Cu foam was successfully electrodeposited on Cu sheet by dynamic hydrogen bubble templating (DHBT) using polyethylene glycol (PEG) and sodium bromide (NaBr) as additives. The current density was set at 3 A·cm-2 and electrodeposition was performed for 20 s. At 200 mg/L PEG, increasing the NaBr concentration from 0 to 80 mM produced Cu foam with decreasing pores sizes of about 75.15 to 34.10 μm. However, the walls of the interconnected pores became thicker as the pore diameters were reduced. This indicates that NaBr promotes Cu deposition rather than hydrogen evolution reaction (HER), leading to smaller pore sizes. X-ray diffraction confirms the oxidation of the Cu foam under ambient conditions forming cuprous oxide (Cu2O). The Cu2O/Cu foam was then utilized as binderless electrode for supercapacitor, resulting to a specific capacitance of 0.815 F·cm-2 at 5 mV·s-1. Results show the potential of the fabricated Cu2O/Cu foam as binderless electrode for pseudo-type supercapacitors.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

The Influence of Introduction of Polyethylene Glycol on Synthesis of Bimodal Mesoporous γ-Al2O3

2013 ◽  
Vol 709 ◽  
pp. 89-92
Author(s):  
Xiang Li ◽  
Xin Mei Liu ◽  
Zi Feng Yan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Polyethylene Glycol ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
Relative Crystallinity ◽  
X Ray ◽  
Transmission Electron ◽  
Increasing Trend ◽  
Opposite Tendency

In the presence of polyethylene glycol (PEG2W),bimodal mesoporous γ-Al2O3 was successfully synthesized via hydrothermal method. The samples were respectively characterized by X-ray diffraction (XRD), N2 physisorption, transmission electron microscopy (TEM), thermogravimetric and differential scanning calorimeter (TG-DSC). Introduction of PEG2W can increase the relative crystallinity of AACH and γ-Al2O3. The BET surface area and pore volume of alumina shows an increasing trend with increasing of PEG2W content, while the pore size shows an opposite tendency. The PEG2W also plays an important role in inducing the formation of the nanorod-like alumina.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

Study on Magnetic Properties of Na-Doped rGO Prepared from Coconut Shells

2020 ◽  
Vol 855 ◽  
pp. 160-165
Author(s):  
Deril Ristiani ◽  
Niken Sylvia Puspitasari ◽  
Retno Asih ◽  
Fahmi Astuti ◽  
Malik Anjelh Baqiya ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Mixing Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Reduced Graphene ◽  
Naoh Solution ◽  
Na Ions ◽  
Diffraction Peaks ◽  
Coconut Shells

Na-doped reduced graphene oxide (Na-rGO) was prepared by wet mixing process of the reduced graphene oxide (rGO) in NaOH solution. The results showed that the rGO doped with Na ions can increase its magnetization approximately 2 times greater than that in rGO without doping. Saturation magnetization (Ms) for rGO and Na-rGO samples are 0.017 emu/g and 0.037 emu/g, respectively. The increasing value of magnetization is suggested to be due to defect presented in the Na-rGO samples. Both samples, rGO and Na-rGO, have the similar XRD (X-ray Diffraction) spectra that is marked by two characteristic diffraction peaks of rGO, which are associated with [002] and [10] planes, followed by the increasing inter-planar distance in Na-rGO samples which might be due to Na ions intercalation into rGO sheets, confirmed by the energy-dispersive X-ray (EDX) result revealing the presence of Na atoms in rGO.

scholarly journals Structural Characterization of Graphene Oxide: Surface Functional Groups and Fractionated Oxidative Debris

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1180 ◽  
Author(s):  
Elvin Aliyev ◽  
Volkan Filiz ◽  
Muntazim M. Khan ◽  
Young Joo Lee ◽  
Clarissa Abetz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Functional Groups ◽  
Structural Model ◽  
Oxide Surface ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
Surface Functional Groups ◽  
X Ray ◽  
Transmission Electron

The purpose of this work is the structural analysis of graphene oxide (GO) and by means of a new structural model to answer the questions arising from the Lerf–Klinowski and the Lee structural models. Surface functional groups of GO layers and the oxidative debris (OD) stacked on them were investigated after OD was extracted. Analysis was performed successfully using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), X-ray photoemission spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, solid-state nuclear magnetic resonance spectroscopy (SSNMR), standardized Boehm potentiometric titration analysis, elemental analysis, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The analysis showed that graphene oxide layers, as well as oxidative debris contain different functional groups such as phenolic –OH, ketone, lactone, carboxyl, quinone and epoxy. Based on these results, a new structural model for GO layers is proposed, which covers all spectroscopic data and explains the presence of the other oxygen functionalities besides carboxyl, phenolic –OH and epoxy groups.

Accelerated Thermal Decomposition of Graphene Oxide Films in Air via in Situ X-ray Diffraction Analysis

2016 ◽  
Vol 120 (27) ◽  
pp. 14984-14990 ◽  
Author(s):  
Qin Pan ◽  
Ching-Chang Chung ◽  
Nanfei He ◽  
Jacob L. Jones ◽  
Wei Gao
Keyword(s):  
Thermal Decomposition ◽  
Graphene Oxide ◽  
Diffraction Analysis ◽  
Oxide Films ◽  
X Ray Diffraction ◽  
X Ray

Study on integration of aluminum-doped zinc oxide (AZO) thin films with graphene oxide (GO)

2018 ◽  
Vol 32 (19) ◽  
pp. 1840044
Author(s):  
Aditya Dalal ◽  
Animesh Mandal ◽  
Shubhada Adhi ◽  
Kiran Adhi
Keyword(s):  
Thin Films ◽  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Aluminum Doped Zinc Oxide ◽  
Uv Visible

Aluminum (0.5 at.%)-doped ZnO (AZO) thin films were deposited by pulsed laser deposition technique (PLD) in oxygen ambient of 10[Formula: see text] Torr. The deposited thin films were characterized by x-ray diffraction (XRD), photoluminescence (PL), Raman spectroscopy and uv–visible spectroscopy (UV–vis). Next, graphene oxide (GO) was synthesized by Hummers method and was characterized by XRD, UV–vis spectroscopy, Raman spectroscopy and transmission electron microscopy (TEM). Thereafter, GO solution was drop-casted on AZO thin films. These films were then characterized by Raman Spectroscopy, UV–vis spectroscopy and PL. Attempt is being made to comprehend the modifications in properties brought about by integration.

Synthesis and Characterization of a New Copper(II) Complex with Nadolol, an Aminoalcoholic Beta-blocker. Crystal Structure of Na[Cu(nadololate)(CO3)] · H2O

2008 ◽  
Vol 63 (5) ◽  
pp. 543-547 ◽  
Author(s):  
Inés Viera ◽  
Laura Domínguez ◽  
Javier Ellena ◽  
María H. Torre
Keyword(s):  
Crystal Structure ◽  
Vibrational Spectroscopy ◽  
Copper Complex ◽  
Beta Blocker ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
X Ray

This work reports the synthesis and characterization of a new copper complex with nadolol, a betablocker aminoalcohol. The stoichiometry found was Na[Cu(nadololate)(CO3)] · H2O. Electronic and vibrational spectroscopy analysis was performed, and the crystal structure of Na[Cu(nadololate)-(CO3)] · H2O was determined by X-ray diffraction.

Sign in / Sign up

Export Citation Format

Share Document