Development of slow sponge sand filter (SpSF) as a post-treatment of UASB-DHS reactor effluent treating municipal wastewater

2016 ◽  
Vol 74 (1) ◽  
pp. 65-72 ◽  
Author(s):  
N. Maharjan ◽  
K. Kuroda ◽  
K. Dehama ◽  
M. Hatamoto ◽  
T. Yamaguchi
Keyword(s):  
Municipal Wastewater ◽  
Oxygen Demand ◽  
Community Analysis ◽  
Total Coliform ◽  
Post Treatment ◽  
Pollutant Removal ◽  
Microbial Community Analysis ◽  
Anaerobic Sludge ◽  
Sand Filter ◽  
Removal Efficiencies

In this study, conventional slow sand filter (SSF) and modified slow sponge sand filter (SpSF) were investigated for the post-treatment of up-flow anaerobic sludge blanket (UASB)-down-flow hanging sponge (DHS) reactor effluent. The seasonal variation did not show significant differences in removal efficiencies of both filters. However in summer, both filters were able to achieve high total suspended solids and total biochemical oxygen demand removal averaging 97% and 99%, respectively. Contrary to organic removal, total nitrogen removal efficiency was satisfactory, showing increased removal efficiencies averaging 58% and 62% for SSF and SpSF in summer. On the other hand, average total coliform removal of SSF and SpSF was 4.2 logs and 4.4 logs and corresponding Escherichia coli removal was 4.0 logs and 4.1 logs, respectively. From our observation, it could be concluded that the relative performance of SpSF for nutrients and coliforms was better than SSF due to the effectiveness of sponge media over fine sands. Moreover, microbial community analysis revealed that the members of phylum Proteobacteria were predominant in the biofilms of both filters, which could have contributed to pollutant removal. Therefore, SpSF could be concluded to be a suitable post-treatment of UASB-DHS system in warmer conditions.

Impact of microaeration bioreactor on dissolved sulfide and methane removal from real UASB effluent for sewage treatment

2020 ◽  
Vol 81 (9) ◽  
pp. 1951-1960 ◽  
Author(s):  
C. S. Cabral ◽  
A. L. Sanson ◽  
R. J. C. F. Afonso ◽  
C. A. L. Chernicharo ◽  
J. C. Araújo
Keyword(s):  
Sewage Treatment ◽  
Oxygen Demand ◽  
Post Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Sulfide Removal ◽  
Dissolved Sulfide ◽  
Removal Efficiencies ◽  
Anaerobic Sludge Blanket

Abstract Two bioreactors were investigated as an alternative for the post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor treating domestic sewage, aiming at dissolved sulfide and methane removal. The bioreactors (R-control and R-air) were operated at different hydraulic retention times (HRT; 6 and 3 h) with or without aeration. Large sulfide and methane removal efficiencies were achieved by the microaerated reactor at HRT of 6 h. At this HRT, sulfide removal efficiencies were equal to 61% and 79%, and methane removal efficiencies were 31% and 55% for R-control and R-air, respectively. At an HRT of 3 h, sulfide removal efficiencies were 22% (R-control) and 33% (R-air) and methane removal did not occur. The complete oxidation of sulfide, with sulfate formation, prevailed in both phases and bioreactors. However, elemental sulfur formation was more predominant at an HRT of 6 h than at an HRT of 3 h. Taken together, the results show that post-treatment improved the anaerobic effluent quality in terms of chemical oxygen demand and solids removal. However, ammoniacal nitrogen was not removed due to either the low concentration of air provided or the absence of microorganisms involved in the nitrogen cycle.

scholarly journals Integrated Anaerobic-Aerobic Sequencing Batch Reactors for Unrestricted Reuse Using Greywater Treatment

2021 ◽  
Vol 12 (12) ◽  
pp. 346-354
Author(s):  
Sarath Chandra Pragada ◽  
◽  
Arun Kumar Thalla
Keyword(s):  
Anionic Surfactant ◽  
Treatment Effectiveness ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Good Deal ◽  
Pollutant Removal ◽  
Integrated System ◽  
Sand Filter ◽  
Sequence Batch Reactor ◽  
Removal Efficiencies

This work is carried out to evaluate the efficiency of the pilot scale integrated scheme which comprises of an Anaerobic Sequence Batch Reactor (AnSBR) reactor, Aerobic Sequence Batch Reactor (ASBR), and sand filter for the elimination of organic matter and nutrient in synthetic greywater. The treatment effectiveness of the pilot plant was identified based on its pollutant removal efficiency for 12 months. The AnSBR removes 49.64, 64.24, 55.35, 87.82, 54.36, 32.73, 72.61, 34.88, and 72.11% of Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), Total Nitrogen (TN), anionic surfactant, Total Phosphorous (TP), Ammonium Nitrogen (NH4+-N), Total Suspended Solids (TSS), Nitrate Nitrogen (NO3--N) and sulphates, respectively. Moreover, the removal efficiencies are improved to 84.27, 86.04, 80.8, 95.13, 80.55, 90.23, 72.98, and 75.45%, respectively, in the ASBR with an additional aeration period. The removal efficiencies of COD, BOD, TN, anionic surfactant, TP, TSS, NH4+-N, NO3--N, and sulphates have been improved progressively to 89.12, 94.9, 85.15, 99, 86.98, 88.54, 93.52, 94.89, and 80.49%, respectively in the sand filter. In tracer studies, that a total of 29.3% of the salt has been remained in the reactor which suggests a good deal of salt of the integrated system. Furthermore, this hydrodynamic study discloses a moderately low volume (30.3%) for the integrated system with the mean residence time is lesser than theoretical hydraulic residential time. Based on these findings, it is evident that the integrated anaerobic-aerobic system bounded with the sand filter process accomplishes the achievement of efficiency.

Performance evaluation of a novel open trickling filter for the post-treatment of anaerobic effluents from small communities

2013 ◽  
Vol 67 (12) ◽  
pp. 2746-2752 ◽  
Author(s):  
P. C. Vieira ◽  
M. von Sperling ◽  
L. C. M. Nogueira ◽  
B. F. S. Assis
Keyword(s):  
Loading Rate ◽  
Oxygen Demand ◽  
Post Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Anaerobic Sludge ◽  
Trickling Filter ◽  
Small Communities ◽  
Hydraulic Loading Rate ◽  
Hydraulic Loading ◽  
Removal Efficiencies

The objective of the work is to evaluate the performance of an innovative design of a trickling filter for small population sizes, which has been implemented for the post-treatment of sanitary effluent from a UASB (upflow anaerobic sludge blanket) reactor. The unit, named open trickling filter (OTF), operates with no side walls, no perforated bottom slab and no secondary settler. The OTF packing was 3.5 m high, composed of crushed stone, with a fixed distribution system made of channels with V-notch weirs. The OTF was operated with mean surface hydraulic loading rates of 4.1 and 9.3 m3 m−2 d−1, corresponding to population equivalents of approximately 250 and 550 inhabitants, respectively. For the surface hydraulic loading rate of 4.1 m3 m−2 d−1, the median removal efficiencies obtained by the OTF and overall system (UASB + OTF) were, respectively, 24 and 83% for total suspended solids (TSS), 44 and 79% for chemical oxygen demand (COD), 42 and 82% for biochemical oxygen demand (BOD), 40 and 40% for N-ammonia. For the surface hydraulic loading rate of 9.3 m3 m−2 d−1, the median removal efficiencies obtained by the OTF and global system (UASB + OTF) were 14 and 76% for TSS, 28 and 76% for COD, 25 and 86% for BOD, 15 and 15% for N-ammonia. Considering the great simplicity, no mechanization and small footprint of the system, these results can be considered satisfactory, suggesting that the OTF is suitable for small communities, especially in developing countries.

scholarly journals Pollutant removal from municipal sewage by a microaerobic up-flow oxidation ditch coupled with micro-electrolysis

2021 ◽  
Vol 8 (12) ◽  
Author(s):  
Zhen-dong Zhao ◽  
Qiang Lin ◽  
Yang Zhou ◽  
Yu-hong Feng ◽  
Qi-mei Huang ◽  
...  
Keyword(s):  
Municipal Wastewater ◽  
Low Cost ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Influential Factors ◽  
Pollutant Removal ◽  
Municipal Sewage ◽  
Reflux Ratio ◽  
Oxidation Ditch ◽  
Important Challenge

The development of efficient and low-cost wastewater treatment processes remains an important challenge. A microaerobic up-flow oxidation ditch (UOD) with micro-electrolysis by waterfall aeration was designed for treating real municipal wastewater. The effects of influential factors such as up-flow rate, waterfall height, reflux ratio, number of stages and iron dosing on pollutant removal were fully investigated, and the optimum conditions were obtained. The elimination efficiencies of chemical oxygen demand (COD), ammonia nitrogen (NH 4 + -N), total nitrogen (TN) and total phosphorus (TP) reached up to 84.33 ± 2.48%, 99.91 ± 0.09%, 93.63 ± 0.60% and 89.27 ± 1.40%, respectively, while the effluent concentrations of COD, NH 4 + -N, TN and TP were 20.67 ± 2.85, 0.02 ± 0.02, 1.39 ± 0.09 and 0.27 ± 0.02 mg l −1 , respectively. Phosphorous removal was achieved by iron–carbon micro-electrolysis to form an insoluble ferric phosphate precipitate. The microbial community structure indicated that carbon and nitrogen were removed via multiple mechanisms, possibly including nitrification, partial nitrification, denitrification and anammox in the UOD.

Open trickling filter: an innovative, cheap and simple form of post-treatment of sanitary effluents from anaerobic reactors in small communities

2012 ◽  
Vol 2 (2) ◽  
pp. 59-67 ◽  
Author(s):  
P. C. Vieira ◽  
M. von Sperling
Keyword(s):  
Loading Rate ◽  
Oxygen Demand ◽  
Post Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Trickling Filter ◽  
Small Communities ◽  
Capital Costs

We aimed to evaluate the performance and cost savings of an innovative design of a trickling filter (TF) for small population sizes, developed at the Federal University of Minas Gerais, Brazil referred to as an open trickling filter (OTF). The OTF had no side walls and no perforated bottom slab, and was applied for the post-treatment of sanitary sewage from an upflow anaerobic sludge blanket (UASB) reactor. The OTF had crushed-stone packing (3.5 m high) and was operated with an average surface hydraulic loading rate of 4.1 m3 m−2 d−1 and an average volumetric organic loading rate of 0.10 kg BOD m−3 d−1 (biochemical oxygen demand). The average concentrations obtained at the OTF effluent were 48 mg TSS L−1 (total suspended solids), 132 mg COD L−1 (chemical oxygen demand), 51 mg BOD L−1, 19 mg TKN L−1 (total Kjeldahl nitrogen), 16 mg NH4+-N L−1 and 10 mg NO3−-N L−1, complying with local discharge standards. Analysis of the construction costs indicated savings of 74% compared to conventional TF. Based on the performance, compactness, simplicity and reduced capital costs, it is believed that the proposed OTF is a good alternative for small communities, especially in developing countries.

scholarly journals Hybrid membrane bioreactor for water recycling and phosphorus recovery

2006 ◽  
Vol 53 (7) ◽  
pp. 17-24 ◽  
Author(s):  
Y. Watanabe ◽  
K. Kimura
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Municipal Wastewater ◽  
Community Analysis ◽  
Hybrid Membrane ◽  
Phosphorus Recovery ◽  
Microbial Community Analysis ◽  
Low Viscosity ◽  
Ph Range ◽  
Phosphoric Acids

This paper deals with the performance of hybrid membrane bioreactor (MBR) combining the precoagulation/sedimentation and membrane bioreactor. The hybrid MBR not only produces the treated water with excellent permeate quality but also shows much lower membrane fouling than the conventional MBR. It may come from its extremely low F/M ratio to maintain the low viscosity even in the high MLSS concentration range of about 20,000 mg/L. Some results of microbial community analysis in MBRs was conducted to demonstrate the other reason for its lower membrane fouling. Hybrid MBR has a high potential to be used for the recycling use of the municipal wastewater. Coagulated sludge produced in the hybrid MBR is a promising phosphorus resource. This paper also contains a recent progress of phosphorus recovery technology, which uses a new phosphoric acids absorbent, i.e. the hexagonal mesostructured zirconium sulfate (ZS). The ZS has the extremely high adsorption capacity of phosphoric acids through anion exchange. The adsorbed phosphoric acids are released from the ZS in a high pH range of about 13.

Effect of tungsten and selenium on C1 gas bioconversion by an enriched anaerobic sludge and microbial community analysis

Chemosphere ◽  
2020 ◽  
Vol 250 ◽  
pp. 126105
Author(s):  
Samayita Chakraborty ◽  
Eldon R. Rene ◽  
Piet N.L. Lens ◽  
Jukka Rintala ◽  
María C. Veiga ◽  
...  
Keyword(s):  
Microbial Community ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Anaerobic Sludge

scholarly journals Simultaneous nitrification and denitrification (SND) bioaugmentation with Pseudomonas sp. HJ3 inoculated for enhancing phenol and nitrogen removal in coal gasification wastewater

2019 ◽  
Vol 80 (8) ◽  
pp. 1512-1523
Author(s):  
Weiwei Ma ◽  
Yuxing Han ◽  
Wencheng Ma ◽  
Hongjun Han ◽  
Chunyan Xu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Coal Gasification ◽  
Oxygen Demand ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Simultaneous Nitrification And Denitrification ◽  
Pseudomonas Sp ◽  
Coal Gasification Wastewater ◽  
Nitrification And Denitrification

Abstract A simultaneous nitrification and denitrification (SND) bioaugmention system with Pseudomonas sp. HJ3 inoculated was established to explore the potential of simultaneous phenol and nitrogen removal in coal gasification wastewater (CGW). When the concentration of influent chemical oxygen demand (COD) and total phenols (TPh) was 1,765.94 ± 27.43 mg/L and 289.55 ± 10.32 mg/L, the average removal efficiency of COD and TPh at the stable operating stage reached 64.07% ± 0.76% and 74.91% ± 0.33%, respectively. Meanwhile, the average removal efficiency of NH4+-N and total nitrogen (TN) reached 67.96% ± 0.17% and 57.95% ± 0.12%, respectively. The maximum SND efficiency reached 83.51%. Furthermore, SND bioaugmentation performed with good nitrification tolerance of phenol shock load and significantly reduced toxic inhibition of organisms. Additionally, the microbial community analysis indicated that Pseudomonas sp. HJ3 was the predominant bacterium in the SND bioaugmentation system. Moreover, the indigenous nitrogen removal bacteria such as Thauera, Acidovorax and Stenotrophomonas were enriched, which further enhanced the nitrogen removal in the SND bioaugmentation system. The results demonstrated the promising application of SND bioaugmentation for enhancing simultaneous phenol and nitrogen removal in CGW treatment.

Sign in / Sign up

Export Citation Format

Share Document