Proteins causing membrane fouling in membrane bioreactors

2015 ◽  
Vol 72 (6) ◽  
pp. 844-849 ◽  
Author(s):  
Taro Miyoshi ◽  
Yuhei Nagai ◽  
Tomoyasu Aizawa ◽  
Katsuki Kimura ◽  
Yoshimasa Watanabe
Keyword(s):  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Polyacrylamide Gel Electrophoresis ◽  
Pilot Scale ◽  
Membrane Bioreactors ◽  
Operating Conditions ◽  
Sequencing Analysis ◽  
2D Page ◽  
Side Stream ◽  
Significant Difference

In this study, the details of proteins causing membrane fouling in membrane bioreactors (MBRs) treating real municipal wastewater were investigated. Two separate pilot-scale MBRs were continuously operated under significantly different operating conditions; one MBR was a submerged type whereas the other was a side-stream type. The submerged and side-stream MBRs were operated for 20 and 10 days, respectively. At the end of continuous operation, the foulants were extracted from the fouled membranes. The proteins contained in the extracted foulants were enriched by using the combination of crude concentration with an ultrafiltration membrane and trichloroacetic acid precipitation, and then separated by two-dimensional polyacrylamide gel electrophoresis (2D-PAGE). The N-terminal amino acid sequencing analysis of the proteins which formed intensive spots on the 2D-PAGE gels allowed us to partially identify one protein (OmpA family protein originated from genus Brevundimonas or Riemerella anatipestifer) from the foulant obtained from the submerged MBR, and two proteins (OprD and OprF originated from genus Pseudomonas) from that obtained from the side-stream MBR. Despite the significant difference in operating conditions of the two MBRs, all proteins identified in this study belong to β-barrel protein. These findings strongly suggest the importance of β-barrel proteins in developing membrane fouling in MBRs.

Membrane fouling caused by sub-micron particles in a mixed liquor suspension of an MBR

2013 ◽  
Vol 67 (11) ◽  
pp. 2602-2607 ◽  
Author(s):  
K. Kimura ◽  
R. Ogyu ◽  
T. Miyoshi ◽  
T. Naruse ◽  
T. Tsuyuhara ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Size Fraction ◽  
Fourier Transform Infrared ◽  
Pilot Scale ◽  
Membrane Bioreactors ◽  
Ftir Analysis ◽  
Mixed Liquor ◽  
Pore Plugging

Membrane fouling needs to be mitigated for widespread use of membrane bioreactors (MBRs). It has been pointed out that particles with small sizes found in supernatants (sub-micron particles) of mixed liquor suspensions of MBRs are important in the evolution of membrane fouling of this technology. However, information on characteristics of sub-micron particles in MBRs is still insufficient. In this study, a pilot-scale MBR treating municipal wastewater was used to investigate and characterize sub-micron particles in an MBR and to identify the size fraction(s) responsible for irreversible fouling in an MBR. It was clearly shown that characteristics of sub-micron particles in the MBR varied considerably depending on their sizes. Results of Fourier transform infrared (FTIR) analysis and monosaccharide analysis suggested that irreversible fouling in this study was mainly caused by the specific size fraction of 0.1–0.45 μm, which was close to the size of micropores of the membrane used. Pore plugging might explain this to some extent.

Modification of submerged membrane bioreactors (MBRs) by inserting baffles: pilot scale study

2007 ◽  
Vol 55 (7) ◽  
pp. 119-126 ◽  
Author(s):  
K. Kimura ◽  
M. Enomoto ◽  
Y. Watanabe
Keyword(s):  
Phosphorus Removal ◽  
Membrane Bioreactor ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Membrane Bioreactors ◽  
Operating Conditions ◽  
Feed Water ◽  
Simple Modification ◽  
Anoxic Conditions ◽  
Scale Experiment

Submerged membrane bioreactors (MBRs) have been gaining in popularity in various types of wastewater treatment. One drawback of submerged MBRs is difficulty in removing nitrogen as they are accompanied with intensive aeration inside the reactor and therefore principally operated under aerobic conditions. In order to address this problem, a simple modification for submerged MBRs, insertion of baffles to create alternative aerobic/anoxic conditions, was proposed. In this study, the performance of the proposed baffled membrane bioreactor (BMBR) was investigated based on a pilot-scale experiment using a real municipal wastewater. With appropriate operating conditions, the BMBR could remove more than 70% of total nitrogen contained in the feed water without any external carbon source. The BMBR demonstrated a good treatment performance in terms of TOC and phosphorus removal as well. Increase of trans-membrane pressure difference was subtle, which might be attributed to the alternative creation of aerobic/anoxic conditions.

Membrane Fouling in Pilot-Scale Membrane Bioreactors (MBRs) Treating Municipal Wastewater

2005 ◽  
Vol 39 (16) ◽  
pp. 6293-6299 ◽  
Author(s):  
Katsuki Kimura ◽  
Nobuhiro Yamato ◽  
Hiroshi Yamamura ◽  
Yoshimasa Watanabe
Keyword(s):  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Membrane Bioreactors

scholarly journals Effect of Operating Conditions on Membrane Fouling in Pilot-Scale MBRs; Filaments Growth, Diminishing Dissolved Oxygen and Recirculation Rate of the Activated Sludge

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 490
Author(s):  
Petros Gkotsis ◽  
Dimitra Banti ◽  
Anastasia Pritsa ◽  
Manassis Mitrakas ◽  
Petros Samaras ◽  
...  
Keyword(s):  
Dissolved Oxygen ◽  
Activated Sludge ◽  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Mixed Liquor ◽  
Filamentous Microorganisms ◽  
Recirculation Rate ◽  
Improved Performance

This is the first study that examines the effect of operating conditions on fouling of Membrane Bio-Reactors (MBRs), which treat municipal wastewater in field conditions, with specific regard to the controlled development of filamentous microorganisms (or filaments). The novelty of the present work is extended to minimize the dissolved oxygen (DO) in recirculated activated sludge for improving the process of denitrification. For this purpose, two pilot-scale MBRs were constructed and operated in parallel: i) Filament-MBR, where an attempt was made to regulate the growth of filaments by adjustment of DO, the Food-to-Microorganisms (F/M) ratio and temperature, and ii) Control-MBR, where a gentle stirring tank was employed for the purpose of zeroing the DO in the recycled sludge. Results showed that low temperature (< 15 °C) slightly increased the number of filaments in the Filament-MBR which, in turn, decreased the Trans-Membrane Pressure (TMP). As the Soluble Microbial Products (SMP) and the colloids are considered to be the basic foulants of membranes in MBR systems, specific attention was directed to keep their concentration at low values in the mixed liquor. The low F/M ratio in the aeration tanks which preceded the membrane tank was achieved to keep the SMP proteins and carbohydrates at very low values in the mixed liquor, i.e., less than 6 mg/L. Moreover, as a result of the low recirculation rate (2.6∙Qin), good aggregation of the produced excess sludge was achieved, and low concentration of colloids with a size ≤50 nm (nearly the membranes’ pore size used for filtration/separation) was measured, accounted for maximum 15% of the total colloids. Additionally, the increase in filamentous population at the Filament-MBR contributed to the further reduction of colloids in the mixed liquor at 7.9%, contributing beneficially to the reduction of TMP and of membrane fouling. The diminishing of DO in the recirculated sludge improved denitrification, and resulted in lower concentrations of Ν-NO3− and TN in the effluent of the Control-MBR. Furthermore, the recirculation rate of Qr = 2.6∙Qin, in comparison with Qr = 4.3∙Qin, resulted in improved performance regarding the removal of N-NH4+. Finally, high organics removal and ammonium nitrification was observed in the effluent of both pilots, since COD and Ν-ΝΗ4+ concentrations were generally in the range of 10–25 mg/L and < 0.1 mg/L, respectively.

Nanofiltration of colored surface water: Quebec's experience

2003 ◽  
Vol 3 (5-6) ◽  
pp. 15-22
Author(s):  
P. Kouadio ◽  
M. Tétrault
Keyword(s):  
Drinking Water ◽  
Surface Water ◽  
Membrane Fouling ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Quebec City ◽  
Water Regulation ◽  
Eastern Canada

Three colored surface water nanofiltration pilot-scale projects were conducted in the province of Quebec (eastern Canada), between November 2000 and March 2002, by the company H2O Innovation (2000) inc., for the municipalities of Lac Bouchette, Latulipe-et-Gaboury and Charlesbourg (now part of Quebec City). Results indicated that nanofiltration permeate quality has an advance on present drinking water regulation standard in Quebec, but important membrane fouling occurred. Fouling can be controlled by pretreatment and optimization of the operating conditions.

scholarly journals Membrane Fouling Controlled by Adjustment of Biological Treatment Parameters in Step-Aerating MBR

Membranes ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 553
Author(s):  
Dimitra C. Banti ◽  
Manassis Mitrakas ◽  
Petros Samaras
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Municipal Wastewater ◽  
Operating Conditions ◽  
Transmembrane Pressure ◽  
Aeration Tank ◽  
Filamentous Bacteria ◽  
Membrane Performance ◽  
Low Concentrations ◽  
Fouling Reduction

A promising solution for membrane fouling reduction in membrane bioreactors (MBRs) could be the adjustment of operating parameters of the MBR, such as hydraulic retention time (HRT), food/microorganisms (F/M) loading and dissolved oxygen (DO) concentration, aiming to modify the sludge morphology to the direction of improvement of the membrane filtration. In this work, these parameters were investigated in a step-aerating pilot MBR that treated municipal wastewater, in order to control the filamentous population. When F/M loading in the first aeration tank (AT1) was ≤0.65 ± 0.2 g COD/g MLSS/d at 20 ± 3 °C, DO = 2.5 ± 0.1 mg/L and HRT = 1.6 h, the filamentous bacteria were controlled effectively at a moderate filament index of 1.5–3. The moderate population of filamentous bacteria improved the membrane performance, leading to low transmembrane pressure (TMP) at values ≤2 kPa for a great period, while at the control MBR the TMP gradually increased reaching 14 kPa. Soluble microbial products (SMP), were also maintained at low concentrations, contributing additionally to the reduction of ΤΜP. Finally, the step-aerating MBR process and the selected imposed operating conditions of HRT, F/M and DO improved the MBR performance in terms of fouling control, facilitating its future wider application.

Correlation between membrane fouling and soluble/colloidal organic substances in membrane bioreactors for municipal wastewater treatment

2005 ◽  
Vol 51 (6-7) ◽  
pp. 1-8 ◽  
Author(s):  
B. Lesjean ◽  
S. Rosenberger ◽  
C. Laabs ◽  
M. Jekel ◽  
R. Gnirss ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Extracellular Polymeric Substances ◽  
Municipal Wastewater ◽  
Membrane Bioreactors ◽  
Size Exclusion ◽  
Water Phase ◽  
Parallel Operation ◽  
Municipal Wastewater Treatment ◽  
Operational Conditions ◽  
The Difference

Two similar membrane bioreactors of 2 m3 each were operated in parallel over two years under the same operational conditions, fed with the same municipal wastewater. The only process and operational difference between both pilot plants was the position of the denitrification zone (pre-denitrification in pilot 1 and post-denitrification in pilot 2). Despite parallel operation, the two MBRs exhibited different fouling rates and decreases in permeability. These differences could not be accounted for by MLSS concentrations, loading rates, or filtration flux. In a one-year investigation, soluble and colloidal organic material in the activated sludge of both MBR was regularly analysed by spectrophotometric and Size Exclusion Chromatography (SEC) methods. The larger organic molecules present in the sludge water phase (i.e. polysaccharides, proteins and organic colloids) originating from microbial activity (extracellular polymeric substances) were found to impact on the fouling and to explain the difference in membrane performance between the two MBR units. In both pilot plants, a linear relationship could be clearly demonstrated between the fouling rate of the membrane and the concentration of polysaccharides in the sludge water phase during a 5 month operational period at an SRT of 8 days.

scholarly journals Design of a Novel Membrane Draft Tube Jet Loop Reactor (MDJLR) and Treatment of Slaughterhouse Wastewater

Membranes ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 155
Author(s):  
Burhanettin Farizoğlu ◽  
Süleyman Uzuner
Keyword(s):  
Membrane Fouling ◽  
High Efficiency ◽  
Draft Tube ◽  
Membrane Surface ◽  
Membrane Bioreactors ◽  
Operating Conditions ◽  
Membrane Module ◽  
Circulation Rate ◽  
Slaughterhouse Wastewater ◽  
Loop Reactor

The most important obstacle to the widespread use of membrane bioreactors (MBRs) is membrane fouling. In this study, a high-efficiency compact MBR was developed. Therefore, the draft tube of the jet loop reactor (JLB) was planned for use as a membrane module. The high-velocity jet streams, which are present according to the nature of the JLBs, provide high crossflow (cut-off force) on the membrane surface. Thus, the produced membrane module is operated in submerged membrane mode. This enhanced JLB modification is named the membrane draft tube jet loop reactor (MDJLR). This new system has a KLa value of 139 h−1 (at E/V of 2.24 kW m−3). In the next stage, treatment of slaughterhouse wastewater with the MDJLR was carried out. Under the 5.5 kg COD m−3 d−1 loading rate, efficiencies over 97% were achieved. The system operated continuously for 50 days without membrane backwashing or cleaning. During this period, fluxes of 3 L m−2·h−1 were approximately obtained at operating conditions of 850 mg L−1 MLSS (mixed liquor suspended solids) concentration, 1 bar suction pressure (∆P), and 3000 L h−1 circulation rate. This developed MDJLR will make jet loop membrane bioreactors (JLMBRs) and MBRs more compact and improve their performance.

scholarly journals Long-Term Investigation into the Membrane Fouling Behavior in Anaerobic Membrane Bioreactors for Municipal Wastewater Treatment Operated at Two Different Temperatures

Membranes ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 231
Author(s):  
Yi Ding ◽  
Zhansheng Guo ◽  
Zhenlin Liang ◽  
Xuguang Hou ◽  
Zhipeng Li ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Membrane Fouling ◽  
Municipal Wastewater ◽  
Membrane Bioreactors ◽  
Municipal Wastewater Treatment ◽  
Sludge Flocs ◽  
Microbial Product ◽  
Anaerobic Membrane Bioreactors ◽  
Sludge Particle

In this study, the characteristics of activated sludge flocs were investigated and their effects on the evolution of membrane fouling were considered in the anaerobic membrane bioreactors (AnMBR), which were operated at 25 and 35 °C for municipal wastewater treatment. It was found that the membrane fouling rate of the AnMBR at 25 °C was more severe than that at 35 °C. The membrane fouling trends were not consistent with the change in the concentration of soluble microbial product (SMP). The larger amount of SMP in the AnMBR at 35 °C did not induce more severe membrane fouling than that in the AnMBR at 25 °C. However, the polysaccharide and protein concentration of extracellular polymeric substance (EPS) was higher in the AnMBR at 25 °C in comparison with that in the AnMBR at 35 °C, and the protein/polysaccharide ratio of the EPS in the AnMBR at 25 °C was higher in contrast to that in the AnMBR at 35 °C. Meanwhile, the fouling tendencies measured for the AnMBRs could be related to the characteristics of loosely bound EPS and tightly bound EPS. The analysis of the activated sludge flocs characteristics indicated that a smaller sludge particle size and more fine flocs were observed at the AnMBR with 25 °C. Therefore, the membrane fouling potential in the AnMBR could be explained by the characteristics of activated sludge flocs.

Sign in / Sign up

Export Citation Format

Share Document