scholarly journals Surface coating with Ca(OH)2 for improvement of the transport of nanoscale zero-valent iron (nZVI) in porous media

2013 ◽  
Vol 68 (10) ◽  
pp. 2287-2293 ◽  
Author(s):  
Cai-jie Wei ◽  
Xiao-yan Li
Keyword(s):  
Porous Media ◽  
Surface Coating ◽  
Coating Layer ◽  
Zero Valent Iron ◽  
Mass Ratio ◽  
Batch Experiments ◽  
Effective Protection ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Protection Layer

A novel thermal deposition method was developed to coat Ca(OH)2 on the surface of nanoscale zero-valent iron (nZVI). The nZVI particles with the Ca(OH)2 coating layer, nZVI/Ca(OH)2, had a clear core-shell structure based on the transmission electron microscopy observations, and the Ca(OH)2 shell was identified as an amorphous phase. The Ca(OH)2 coating shell would not only function as an effective protection layer for nZVI but also improve the mobility of nZVI in porous media for its use in environmental decontamination. A 10% Ca/Fe mass ratio was found to result in a proper thickness of the Ca(OH)2 shell on the nZVI surface. Based on the filtration tests in sand columns, the Ca(OH)2-based surface coating could greatly improve the mobility and transport of nZVI particles in porous media. In addition, batch experiments were conducted to evaluate the reactivity of Ca(OH)2-coated nZVI particles for the reduction of Cr(VI) and its removal from water.

Degradation of bromamine acid by nanoscale zero-valent iron (nZVI) supported on sepiolite

2012 ◽  
Vol 66 (12) ◽  
pp. 2539-2545 ◽  
Author(s):  
Xuening Fei ◽  
Lingyun Cao ◽  
Lifeng Zhou ◽  
Yingchun Gu ◽  
Xiaoyang Wang
Keyword(s):  
Ph Value ◽  
Energy Dispersive Spectrometer ◽  
Zero Valent Iron ◽  
Mass Ratio ◽  
Initial Concentration ◽  
Preparation Conditions ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Initial Ph ◽  
Set Up

Sepiolite, a natural nano-material, was chosen as a carrier to prepare supported nanoscale zero-valent iron (nZVI). The effects of preparation conditions, including mass ratio of nZVI and activated sepiolite and preparation pH value, on properties of the supported nZVI were investigated. The results showed that the optimal mass ratio of nZVI and sepiolite was 1.12:1 and the optimal pH value was 7. The supported nZVI was characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and energy dispersive spectrometer (EDS), and furthermore an analogy model of the supported nZVI was set up. Compared with the nZVI itself, the supported nZVI was more stable in air and possessed better water dispersibility, which were beneficial for the degradation of bromamine acid aqueous solution. The degradation characteristics, such as effects of supported nZVI dosage, initial concentration and initial pH value of the solution on the decolorization efficiency were also investigated. The results showed that in an acidic environment the supported nZVI with a dosage of 2 g/L showed high activity in the degradation of bromamine acid with an initial concentration of 1,000 mg/L, and the degree of decolorization could reach up to 98%.

A Facile Strategy to Fabricate Nanoscale Zero-Valent Iron Decorated Graphene Oxide Composite for Dechloridation of Trichloroacetic Acid in Water

2018 ◽  
Vol 18 (12) ◽  
pp. 8252-8257 ◽  
Author(s):  
Huixuan Zhang ◽  
Xinyi Zhang ◽  
Ruonan Guo ◽  
Qingfeng Cheng ◽  
Xiuwen Cheng
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Sewage Treatment ◽  
Reduction Process ◽  
Zero Valent Iron ◽  
Chlorinated Organic Compounds ◽  
X Ray ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Adsorption Desorption

In this study, nanoscale zero-valent iron decorated graphene oxide (NZVI/GO) composite was fabricated through a reduction process in the presence of sodium borohydride (NaBH4) solution. Subsequently, physicochemical properties of the NZVI/GO composites were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), N2 adsorption/desorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy (FT-IR) and Raman spectra. Results indicated that Fe species existed in the form of Fe0, which uniformly dispersed on the surface of GO. Furthermore, the performance of NZVI/GO was evaluated by the degradation of tichloroacetic acid (TCAA). TCAA can be rapidly degraded by NZVI/GO. This paper provides a promising strategy to synthesize versatile catalyst which would be potentially applied in sewage treatment to degrade chlorinated organic compounds.

Enhanced Removal of Mercury and Lead by a Novel and Efficient Surface-functionalized Imogolite with Nanoscale Zero-valent Iron Material

2021 ◽  
Author(s):  
Estefanía Martinis ◽  
Juliano Denardin ◽  
Raul Calderón Raul Calderón ◽  
Cristóbal Flores ◽  
Karen Manquián-Cerda ◽  
...  
Keyword(s):  
Multicomponent System ◽  
Kinetic Studies ◽  
Zero Valent Iron ◽  
Hybrid Nanomaterial ◽  
Adsorption Sites ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Equilibrium Data ◽  
Softness Parameter ◽  
Chemical Procedure

Abstract A novel hybrid nanomaterial, nanoscale zero-valent iron (nZVI)-grafted imogolite nanotubes (Imo), was synthesized via a fast and straightforward chemical procedure. The as-obtained nanomaterial (Imo-nZVI) was characterized using transmission electron microscopy (TEM), electrophoretic mobility (EM) and vibrating sample magnetometry (VSM). The prepared Imo-nZVI was superparamagnetic at room temperature and could be easily separated by an external magnetic field. Sorption batch experiments were performed in single- and multicomponent system and showed that Hg2+ and Pb2+ could be quantitatively adsorbed at pH 4.0 with maximum adsorption capacities of 62.3 and 73.8 mg·g− 1, respectively. It was observed that the functional groups in Imo-nZVI interact preferentially with analytes according to Misono Softness parameter. The higher performance of Imo-nZVI compared with Imo and nZVI is related to the increased adsorption sites in the functionalized nanomaterial. The sorption equilibrium data obeyed the Langmuir model, while kinetic studies demonstrated that the sorption processes of Hg2+ and Pb2+ followed the pseudo-second-order model. This study suggests that the Imo-nZVI composite can be used as a promising sorbent and provides a simple and fast separation method for the removal of Hg and Pb ions from contaminated water.

scholarly journals Fenton-Like Oxidation of Antibiotic Ornidazole Using Biochar-Supported Nanoscale Zero-Valent Iron as Heterogeneous Hydrogen Peroxide Activator

2020 ◽  
Vol 17 (4) ◽  
pp. 1324 ◽  
Author(s):  
Yanchang Zhang ◽  
Lin Zhao ◽  
Yongkui Yang ◽  
Peizhe Sun
Keyword(s):  
Oxidation Process ◽  
Zero Valent Iron ◽  
Order Kinetic ◽  
Mass Ratio ◽  
Promising Alternative ◽  
Nanoscale Zero Valent Iron ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
H2o2 System

Biochar (BC)-supported nanoscale zero-valent iron (nZVI-BC) was investigated as a heterogeneous Fenton-like activator to degrade the antibiotic ornidazole (ONZ). The characterization of nZVI-BC indicated that BC could enhance the adsorption of ONZ and reduce the aggregation of nZVI. Thus, nZVI-BC had a higher removal efficiency (80.1%) than nZVI and BC. The effects of parameters such as the nZVI/BC mass ratio, pH, H2O2 concentration, nZVI-BC dose, and temperature were systematically investigated, and the removal of ONZ followed a pseudo-second-order kinetic model. Finally, possible pathways of ONZ in the oxidation process were proposed. The removal mechanism included the adsorption of ONZ onto the surface of nZVI-BC, the generation of •OH by the reaction of nZVI with H2O2, and the oxidation of ONZ. Recycling experiments indicated that the nZVI-BC/H2O2 system is a promising alternative for the treatment of wastewater containing ONZ.

Transport of sucrose-modified nanoscale zero-valent iron in saturated porous media: role of media size, injection rate and input concentration

2015 ◽  
Vol 72 (9) ◽  
pp. 1463-1471 ◽  
Author(s):  
Hui Li ◽  
Yong-sheng Zhao ◽  
Zhan-tao Han ◽  
Mei Hong
Keyword(s):  
Porous Media ◽  
Packed Column ◽  
Injection Rate ◽  
Zero Valent Iron ◽  
Silica Sand ◽  
Saturated Porous Media ◽  
Input Concentration ◽  
K Value ◽  
Nanoscale Zero Valent Iron

The growing use of nanoscale zero-valent iron (NZVI) in the remediation of contaminated groundwater raises concerns regarding its transport in aquifers. Laboratory-scale sand-packed column experiments were conducted with bare and sucrose-modified NZVI (SM-NZVI) to improve our understanding of the transport of the nanoparticles in saturated porous media, as well as the role of media size, suspension injection rate and concentration on the nanoparticle behavior. As the main indicative parameters, the normalized effluent concentration was measured and the deposition rate coefficient (k) was calculated for different simulated conditions. Overall, compared to the high retention of bare NZVI in the saturated silica column, SM-NZVI suspension could travel through the coarse sand column easily. However, the transport of SM-NZVI particles was not very satisfactory in a smaller size granular matrix especially in fine silica sand. Furthermore, the value of k regularly decreased with the increasing injection rate of suspension but increased with suspension concentration, which could reflect the role of these factors in the SM-NZVI travel process. The calculation of k-value at the tests condition adequately described the experimental results from the point of deposition dynamics, which meant the assumption of first-order deposition kinetics for the transport of NZVI particles was reasonable and feasible.

Transport characteristics of nanoscale zero-valent iron carried by three different “vehicles” in porous media

2014 ◽  
Vol 49 (14) ◽  
pp. 1639-1652 ◽  
Author(s):  
Yan Su ◽  
Yong S. Zhao ◽  
Lu L. Li ◽  
Chuan Y. Qin ◽  
Fan Wu ◽  
...  
Keyword(s):  
Porous Media ◽  
Zero Valent Iron ◽  
Nanoscale Zero Valent Iron

Fine structural features of nanoscale zero-valent iron characterized by spherical aberration corrected scanning transmission electron microscopy (Cs-STEM)

The Analyst ◽  
2014 ◽  
Vol 139 (18) ◽  
pp. 4512-4518 ◽  
Author(s):  
Airong Liu ◽  
Wei-xian Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Spherical Aberration ◽  
Zero Valent Iron ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Scanning Transmission ◽  
Aberration Corrected

An angstrom-resolution physical model of nanoscale zero- valent iron (nZVI) is generated with a combination of spherical aberration corrected scanning transmission electron microscopy (Cs-STEM) and energy-dispersive X-ray spectroscopy (EDS).

Sign in / Sign up

Export Citation Format

Share Document