High rate nitrogen removal by the CANON process at ambient temperature

2012 ◽  
Vol 65 (10) ◽  
pp. 1826-1833 ◽  
Author(s):  
Li Zhang ◽  
Jing Jiang ◽  
Jiachun Yang ◽  
Daisuke Hira ◽  
Kenji Furukawa
Keyword(s):  
Ambient Temperature ◽  
Nitrogen Removal ◽  
Morphological Characteristics ◽  
Granular Sludge ◽  
Cost Effective ◽  
High Rate ◽  
Anammox Bacteria ◽  
Operational Strategies ◽  
Nitrite Oxidizing Bacteria ◽  
Canon Process

Completely autotrophic nitrogen removal over nitrite (CANON) is a cost-effective nitrogen removal process. Implementation of the CANON process relies on the cooperation of ammonium-oxidizing and Anammox bacteria, as well as the inhibition of nitrite-oxidizing bacteria. Strict limitations on dissolved oxygen (DO) concentration in the reactor, and the addition of sufficient inorganic carbon in the influent, were adopted as the main operational strategies. The reactor was fed with synthetic inorganic wastewater composed mainly of NH4+-N, and operated for 106 days. Stable nitrogen removal rates (NRR) of around 1.4 kg N m−3 d−1 were obtained at ambient temperature. Morphological characteristics and analysis of bacterial community confirmed the formation of functional outer aerobic and inner anaerobic granular sludge, providing evidence of stable nitrogen removal.

scholarly journals Start-Up and Aeration Strategies for a Completely Autotrophic Nitrogen Removal Process in an SBR

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoling Zhang ◽  
Fan Zhang ◽  
Yanhong Zhao ◽  
Zhengqun Li
Keyword(s):  
Removal Efficiency ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Tap Water ◽  
Granular Sludge ◽  
Anammox Bacteria ◽  
Intermittent Aeration ◽  
Start Up ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

The start-up and performance of the completely autotrophic nitrogen removal via nitrite (CANON) process were examined in a sequencing batch reactor (SBR) with intermittent aeration. Initially, partial nitrification was established, and then the DO concentration was lowered further, surplus water in the SBR with high nitrite was replaced with tap water, and continuous aeration mode was turned into intermittent aeration mode, while the removal of total nitrogen was still weak. However, the total nitrogen (TN) removal efficiency and nitrogen removal loading reached 83.07% and 0.422 kgN/(m3·d), respectively, 14 days after inoculating 0.15 g of CANON biofilm biomass into the SBR. The aggregates formed in SBR were the mixture of activated sludge and granular sludge; the volume ratio of floc and granular sludge was 7 : 3. DNA analysis showed that Planctomycetes-like anammox bacteria and Nitrosomonas-like aerobic ammonium oxidization bacteria were dominant bacteria in the reactor. The influence of aeration strategies on CANON process was investigated using batch tests. The result showed that the strategy of alternating aeration (1 h) and nonaeration (1 h) was optimum, which can obtain almost the same TN removal efficiency as continuous aeration while reducing the energy consumption, inhibiting the activity of NOB, and enhancing the activity of AAOB.

Performance and inhibition recovery of anammox reactors seeded with different types of sludge

2011 ◽  
Vol 63 (4) ◽  
pp. 710-718 ◽  
Author(s):  
S. Q. Ni ◽  
J. Meng
Keyword(s):  
Nitrogen Removal ◽  
Granular Sludge ◽  
Recovery Process ◽  
Nitrogen Loading ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Recovery Processes ◽  
Anammox Activity ◽  
Different Types ◽  
Anaerobic Sludge Blanket

In order to study the performance, inhibition and recovery processes of different types of anammox sludge, three up-flow anaerobic sludge blanket reactors were inoculated with flocculent sludge, granular sludge, and cultured inactive methanogenic granules. During stable period, with nitrogen loading rates of 0.9–1.1 kg/m3/d, the total nitrogen removal efficiencies of these reactors averaged at 86.5%, 90.8% and 93.5%, respectively. The kinetics study indicated that the reactor seeded with cultured inactive methanogenic granules possessed the highest nitrogen removal potential, followed by the granular anammox reactor and the flocculent anammox reactor. The study suggested that a concentration as high as 988.3 mg NH4+-N/L and 484.4 mg NO2−-N/L could totally inhibit granular anammox bacteria and result in a inhibition of 50% flocculent anammox activity. In addition, reactors seeded with flocculent sludge and anammox granules could be fully recovered by decreasing their influent substrate concentrations. However, the decrease of influent substrate concentration for the reactor with cultured inactive methanogenic granules could only restore about 75% of its bacterial activity. In this study, anammox bacteria purity was the major factor to evaluate the recovery ability in comparison with sludge type. Free ammonia was a more appropriate indicator for the anammox recovery process compared to free nitric acid.

Development of granular sludge coupling n-DAMO and Anammox in membrane granular sludge reactor for high rate nitrogen removal

2020 ◽  
Vol 186 ◽  
pp. 109579 ◽  
Author(s):  
Sheng-Qiang Fan ◽  
Guo-Jun Xie ◽  
Yang Lu ◽  
Bing-Feng Liu ◽  
De-Feng Xing ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Granular Sludge ◽  
High Rate

Autotrophic nitrogen removal in sequencing batch biofilm reactors at different oxygen supply modes

2008 ◽  
Vol 58 (10) ◽  
pp. 1889-1894 ◽  
Author(s):  
C. Wantawin ◽  
J. Juateea ◽  
P. L. Noophan ◽  
J. Munakata-Marr
Keyword(s):  
Nitrogen Removal ◽  
Nitrogen Loss ◽  
Ammonia Concentration ◽  
Anammox Bacteria ◽  
Ammonia Oxidizing Bacteria ◽  
Intermittent Aeration ◽  
Biofilm Reactors ◽  
Air Supply ◽  
Nitrite Oxidizing Bacteria ◽  
Sequencing Batch Biofilm Reactors

Conventional nitrification-denitrification treatment is a common way to treat nitrogen in wastewater, but this process is costly for low COD/N wastewaters due to the addition of air and external carbon-source. However, ammonia may alternatively be converted to dinitrogen gas by autotrophic bacteria utilizing aerobically autotrophically produced nitrite as an electron acceptor under anoxic conditions. Lab-scale sequencing batch biofilm reactors (SBBRs) inoculated with normal nitrifying sludge were employed to study the potential of an oxygen-limited autotrophic nitrification-denitrification process initiated with typical nitrifying sludge for treating a synthetic ammonia wastewater devoid of organic carbon in one step. The ring-laced fibrous carrier (length 0.32 m, surface area 3.4 m2/m) was fixed vertically in a 3 L reactor. Two different air supply modes were applied:continuous aeration to control dissolved oxygen at 1.5 mg/L and intermittent aeration. High nitrogen removals of more than 50% were obtained in both SBBRs. At an ammonia loading of 0.882 gm N/m2-day [hydraulic retention time (HRT) of 24 hr], the SBBR continuously aerated to 1.5 mg DO/L had slightly higher nitrogen removal (64%) than the intermittently alternated SBBR (55%). The main form of residual nitrogen in the effluent was ammonia, at concentrations of 25 mg/L and 37 mg N/L in continuous and intermittent aeration SBBRs, respectively. Ammonia was completely consumed when ammonia loading was reduced to 0.441 gm N/m2-day [HRT extended to 48 hr]. The competitive use of nitrite by aerobic nitrite oxidizing bacteria (ANOB) with anaerobic ammonia-oxidizing bacteria (anammox bacteria) during the expanded aeration period under low remaining ammonia concentration resulted in higher nitrate production and lower nitrogen loss in the continuous aeration SBBR than in the intermittent aeration SBBR. The nitrogen removal efficiencies in SBBRs with continuous and alternating aerated were 80% and 86% respectively. Specific microorganisms in the biofilm were characterized using fluorescence in situ hybridization. Aerobic ammonia-oxidizing bacteria (AAOB) occurred side by side with putative anammox bacteria (cells hybridizing with probe AMX820) throughout the biofilm, though ANOB were rarely detected.

Nitrogen removal efficiency and microbial community analysis of ANAMMOX biofilter at ambient temperature

2015 ◽  
Vol 71 (5) ◽  
pp. 725-733 ◽  
Author(s):  
Zeng Taotao ◽  
Li Dong ◽  
Zeng Huiping ◽  
Xie Shuibo ◽  
Qiu Wenxin ◽  
...  
Keyword(s):  
Microbial Community ◽  
Ambient Temperature ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Denaturing Gradient Gel Electrophoresis ◽  
Removal Rate ◽  
Ammonia Concentration ◽  
Visual Observation ◽  
Microbial Community Analysis ◽  
Anammox Bacteria

An upflow anaerobic biofilter (AF) was developed to investigate anaerobic ammonium-oxidizing (ANAMMOX) efficiency in treating low-strength wastewater at ambient temperature (15.3–23.2 °C). Denaturing gradient gel electrophoresis (DGGE) and fluorescence in situ hybridization were used to investigate treatment effects on the microbial community. Stepwise decreases in influent ammonia concentration could help ANAMMOX bacteria selectively acclimate to low-ammonia conditions. With an influent ammonia concentration of 46.5 mg/L, the AF reactor obtained an average nitrogen removal rate of 2.26 kg/(m3 day), and a removal efficiency of 75.9%. polymerase chain reaction-DGGE results showed that microbial diversity in the low matrix was greater than in the high matrix. Microbial community structures changed when the influent ammonia concentration decreased. The genus of functional ANAMMOX bacteria was Candidatus Kuenenia stuttgartiensis, which remained stationary across study phases. Visual observation revealed that the relative proportions of ANAMMOX bacteria decreased from 41.6 to 36.3% across three study phases. The AF bioreactor successfully maintained high activity due to the ANAMMOX bacteria adaptation to low temperature and substrate conditions.

Newly designed high-coverage degenerate primers for nitrogen removal mechanism analysis in a partial nitrification-anammox (PN/A) process

2019 ◽  
Vol 96 (1) ◽  
Author(s):  
Qingkun Wang ◽  
Jianzhong He
Keyword(s):  
Nitrogen Removal ◽  
Partial Nitrification ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Anammox Bacteria ◽  
Mechanism Analysis ◽  
Reactor Performance ◽  
Degenerate Primers ◽  
High Coverage ◽  
Nitrite Oxidizing Bacteria

ABSTRACT Reliable tools for quantification of different functional populations are required to achieve stable, effective nutrients removal in partial nitrification and anammox (PN/A) processes. Here we report the design and validation of degenerate PCR primer pairs targeting anammox bacteria, aerobic ammonium-oxidizing bacteria (AeAOB) and nitrite-oxidizing bacteria (NOB) with high coverage but without sacrificing specificity. The new primer pairs are able to cover a broader range of the targeted populations (58.4 vs 21.7%, 49.5 vs 47.6%, 80.7 vs 57.2% and 70.5 vs 42.3% of anammox bacteria, AeAOB, Nitrobacter and Nitrospina, respectively) than previously published primers. Particularly, the Amx719F/875R primer can retrieve a larger number of 16S rRNA genes from different types of samples with amplicons covering all known anammox bacteria genera (100% coverage) including the recently found novel genus, Asahi BRW. These newly desinged primers will provide a more reliable molecular tool to investigate the mechanisms of nitrogen removal in PN/A processes, which can provide clearer links between reactor performance, the metabolic activities and abundances of functional populations, shedding light on conditions that are favorable to the establishment of stable PN/A.

scholarly journals Nitrogen removal and microbial communities of a completely autotrophic nitrogen removal over nitrite (CANON) sequencing batch biofilm reactor (SBBR) at different inorganic carbon (IC) concentrations

2020 ◽  
Vol 81 (5) ◽  
pp. 1071-1079
Author(s):  
Caimeng Wang ◽  
Lirong Lei ◽  
Fangrui Cai ◽  
Youming Li
Keyword(s):  
Nitrogen Removal ◽  
Inorganic Nitrogen ◽  
Biofilm Reactor ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Sequencing Batch Biofilm Reactor ◽  
Microbial Analysis ◽  
Total Inorganic Nitrogen ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

Abstract In this study, the completely autotrophic nitrogen removal over nitrite (CANON) process was initiated in a sequencing batch biofilm reactor (SBBR). Then the reactor was operated under different IC/N ratios. The total inorganic nitrogen removal efficiency (TINRE) at IC/N ratios of 0.75, 1.0, 1.25, 1.5 and 2.0 were 37.0 ± 11.0%, 58.9 ± 10.2%, 73.9 ± 3.2%, 73.6 ± 1.8% and 72.6 ± 2.0%, respectively. The suitable range of IC/N ratio in this research is 1.25–2.0. The poor nitrogen removal performance at IC/N ratio of 0.75 was due to the lack of growth substrate for AnAOB and low pH simultaneously; at IC/N ratio of 1.0 this was because the substrate concentration was insufficient for fully recovering the AnAOB activities. Microbial analysis indicated that Nitrosomonas, Nitrospira and Candidatus Brocadia were the main ammonium oxidation bacteria (AOB), nitrite oxidation bacteria (NOB) and anammox bacteria (AnAOB), respectively. In addition, at IC ratios of 1.25 or higher, denitrification was promoted with the rise of IC/N ratio, which might be because the change of IC concentrations caused cell lysis of microorganisms and provided organic matter for denitrification.

scholarly journals Model-based evaluation of the contribution of partial denitrification (PD) on the one-stage autotrophic nitrogen removal process

2021 ◽  
Author(s):  
Chi Zhang ◽  
Lianze Yu ◽  
Miao Zhang ◽  
Jun Wu
Keyword(s):  
Nitrogen Removal ◽  
Oxygen Demand ◽  
Anammox Bacteria ◽  
Removal Process ◽  
One Stage ◽  
Biofilm Model ◽  
Nitrite Oxidizing Bacteria ◽  
The One ◽  
Steady State Simulation ◽  
Autotrophic Nitrogen Removal

Abstract The nitrate produced by the one-stage partial nitritation-anammox (PN/A) process can be removed through partial denitrification (PD) by adding carbon source. In this study, a 1D multi-population biofilm model was developed to evaluate the contribution of partial denitrification on the one-stage autotrophic nitrogen removal process at influent NH4+ = 100 mg N/L. The dynamic simulation that was carried out to investigate the effect of nitrite-oxidizing bacteria (NOB) revealed that PD contributed to the reactor to obtain total nitrogen removal efficiency (TNR) of above 90% and the effluent nitrate was significantly decreased with the absence of NOB. However, PD decreased TNR of the one-stage PN/A process with the presence of NOB. Increased influent chemical oxygen demand (COD) widened the dissolved oxygen (DO) range required for high TNR whether NOB were present or not. The steady-state simulation results showed that NOB were always absent in the granules at high DO and COD levels and the optimum DO > 0.5 mg/L when influent COD was over 50 mg/L. Besides, higher influent COD/NH4+ (C/N) and larger granule diameter (diameter > 1600 µm) were contributed to widening the range of DO required for high TNR. The nitrogen removal contribution of anammox bacteria (AMX) was significantly higher than denitrification in the reactor.

Sign in / Sign up

Export Citation Format

Share Document