Selective separation of Cr(III) and Fe(III) from liquid effluents using a chelating resin

This study aimed to assess the selective separation of Cr(III) from Fe(III) from liquid solutions by using a chelating ion exchange resin, Diaion CR 11, from Mitsubishi Chemical Corporation, in the H+ form. Equilibrium experiments with synthetic solutions of iron and chromium were carried out in batch mode. For both metals favorable adsorption isotherms were obtained, and the experimental data were well described by the Langmuir model. However, the resin exhibited higher affinity for iron than for chromium. The regeneration experiments revealed that, for both metals, HCl provided higher removal efficiencies than H2SO4 and HNO3. Moreover, precipitation with NaOH allows selectively separate chromium and iron to be stripped from the resin. Experiments in fixed bed operation were carried out to assess the dynamic behavior of the sorption of Cr(III) and Fe(III) into the tested resin by using synthetic and industrial solutions. The experiments with industrial effluent showed that the resin can remove low levels of contaminant transition metal ions, and thus the effluent can be purified for reuse of chromium during periods of 20–25 min. The resin regeneration was achieved with a sequential treatment with HCl and NaOH/H2O2. High efficiencies were observed for both monocomponent and multicomponent systems. A global strategy for separating and recovering Cr(III) from an effluent that also contains Fe(III) is presented, involving the integration of ion exchange (saturation and regeneration phases) and precipitation processes. In conclusion, our approach demonstrates that efficient separation of chromium and iron is possible if ion exchange operation in a fixed bed configuration is optimized and combined with conventional processes such as precipitation.