Study of antifouling modified ultrafiltration membrane based on the secondary treated water of urban sewage

2012 ◽  
Vol 66 (10) ◽  
pp. 2074-2082 ◽  
Author(s):  
Xiao-rong Meng ◽  
Liang Zhao ◽  
Lei Wang ◽  
Xu-dong Wang ◽  
Dan-xi Huang ◽  
...  
Keyword(s):  
Polyvinylidene Fluoride ◽  
Layer Structure ◽  
Pure Water ◽  
Water Flux ◽  
Inversion Method ◽  
Treated Water ◽  
Urban Sewage ◽  
Cake Layer ◽  
Modified Membrane ◽  
Section Structure

Mixtures of polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA) containing hydrophilic ultrafiltration membranes were prepared by adding PVA (5 to 30%) to PVDF by the phase inversion method. The hydrophilic contact angle (CA), equilibrium water content, pure water flux and bovine serum albumin retention were studied to assess the membrane performance. The anti-fouling performance of modified membrane to the secondary treated water was evaluated by flux decline, washing recovery rate and fouling resistance analysis. Scanning electron microscopy showed that the cross-section structure of the membranes had finger-like pores, which were well developed and uniformly distributed, and the sub-layer structure was looser and more porous with the increasing content of PVA. The CA gradually decreased. The steady flux was 800 L/m2 h from P15 to P30, and the BSA retention sharply declined. The ultrafiltration tests for secondary treated water indicated that the main fouling source of the modified membrane was the concentration polarization and cake layer resistance. After physical flushing, the flux recovery ratio of the membrane could reach 100% when the PVA content was 5–15%, which shows excellent anti-pollution performance and good prospects for use in processing wastewater from urban sewage.

Hydrophilic modification of PVDF membranes by in situ synthesis of nano-Ag with nano-ZrO2

2021 ◽  
Vol 10 (1) ◽  
pp. 538-546
Author(s):  
Yanjun Lu ◽  
Yuxuan Ma ◽  
Tong Yang ◽  
Jifeng Guo
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Inversion Method ◽  
Hydrophilic Modification ◽  
E Coli ◽  
Pure Water Flux ◽  
Modified Membrane ◽  
Phase Inversion Method

Abstract Modified polyvinylidene fluoride (PVDF) membranes were prepared by the phase inversion method via blending in situ formed nanosilver (Ag) and nanozirconium dioxide (ZrO2). Scanning electron microscopy of the membranes revealed that the surface pore size of the membranes was increased and distributed widely with the addition of modified nanosilver (Ag) and nanozirconium dioxide (ZrO2). The pores of the membrane were reduced due to excessive modification of the material when the content of zirconium dioxide was increased to 0.4%. XRD characterization showed that in situ synthesis of nanosilver (Ag) and nanozirconium dioxide (ZrO2) had been successfully blended in the membranes. The contact angle of the modified membrane ranged from 82.72° to 67.37°, which showed that the hydrophilic properties of the membrane were improved. The pure water flux of the modified membrane increased from 28.43 to 143.2 L/m2 h, indicating that the hydrophilicity of the modified membrane was enhanced significantly. The flux recovery rate of the modified membrane was obviously increased in the fouling experiment with BSA as the source of organic pollutants. The antimicrobial contamination of the membrane was greatly enhanced with the E. coli microbial contamination experiment.

Preparation and Characterization of BaBi2Nb2O9/PVDF Inorganic-Organic Composite Ultrafiltration Membranes

2013 ◽  
Vol 681 ◽  
pp. 309-313
Author(s):  
Dong Hua Zhang ◽  
Li Jing Pan ◽  
Da Zhi Sun
Keyword(s):  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Composite Membranes ◽  
Rejection Rate ◽  
Inversion Method ◽  
Ultrafiltration Membranes ◽  
Cross Sectional ◽  
Uf Membranes ◽  
Phase Inversion Method

BaBi2Nb2O9/PVDF (polyvinylidene fluoride) composite ultrafiltration (UF)membranes were prepared by alloying BaBi2Nb2O9 (BBN) particles uniformly in the PVDF solution (15% polymer weight) and used a phase-inversion method. This paper studied the effect of the concentration of BBN from 0% to 5% in 0.2Mpa on pure water flux and rejection rate to Bovine serum albumin (BSA). The cross-sectional structures of composite membranes were observed by scanning electron microscopy (SEM). Moreover, XRD results revealed the crystal structure of PVDF. The experimental results showed that the BBN/PVDF composite ultrafiltration membranes were superior in separation performances than the pure PVDF membranes due to the addition of BBN.

scholarly journals Preparation of Hollow Fiber Membrane Containing ZnO Nanoparticles to Remove Natural Organic Matter

2021 ◽  
Vol 8 (2) ◽  
pp. 11-20
Author(s):  
Abdullah Adnan Abdulkarim ◽  
Yosra Mohammed Mahdi ◽  
Haider Jasim Mohammed
Keyword(s):  
Zinc Oxide ◽  
Hollow Fiber ◽  
Hollow Fiber Membrane ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Sem Analysis ◽  
Inversion Method ◽  
Fiber Membrane ◽  
Modified Membrane

Polyethersulfone/zinc oxide mixed matrix hollow fiber membrane was fabricated using dry/wet phase inversion method. Zinc oxide nanoparticles (2 wt.%) were dispersed in N,N-dimethylacetamide (DMAc) solvent in the present of polyvinylepyrrolidene. The dope solution speed and take up speed was similar with performing the spinning process at room temperature. The produced membranes were characterized using scanning electron microscope (SEM), atomic force microscope (AFM), and Fourier transform infrared (FTIR) analysis. Membrane performance was evaluated using pure water flux (PWF), relative flux ration (RFR), and total organic carbon (TOC) removal efficiency. From SEM analysis, it was found that the nanoparticles were well dispersed in the polymeric matrix. From AFM results, it was observed that the modified membrane has higher surface roughness. The PWF of the modified membrane was enhanced, while the RFR showed to increase due to rougher membrane surface. The NOM remaoval of PES/ZnO membrane was higher than that of PES membrane and reached to 27% compared to only 16.9 % for pristine PES.

Effect of Nano-Sized ZnO Particle Addition on PVDF Ultrafiltration Membrane Performance

2011 ◽  
Vol 311-313 ◽  
pp. 1818-1821 ◽  
Author(s):  
Yang He ◽  
Jun Ming Hong
Keyword(s):  
Aqueous Solution ◽  
Polyvinylidene Fluoride ◽  
Tensile Elongation ◽  
Water Flux ◽  
Reclaimed Water ◽  
Oxygen Demand ◽  
Inversion Method ◽  
Permeation Flux ◽  
Pvdf Membrane ◽  
Modified Membrane

In this study, a polyvinylidene fluoride (PVDF) ultrafiltration (UF) membrane was modified by dispersing nano-sized ZnO particles in a PVDF solution. PVDF membranes were fabricated by a phase inversion method. The permeation flux, mechanical properties, rejection of BSA aqueous solution and reclaimed water treatment were examined. The results indicate that the permeation flux of the modified membrane was lower than the neat PVDF membrane. The maximum tension force and tensile elongation length were improved initially for the modified membrane. The rejection of BSA aqueous solution was improved to 98.4%, while the neat PVDF membrane was 87.26%, and the relative water flux reduction was lower than the neat PVDF membrane. The chemical oxygen demand (COD) removal of the reclaimed water treated by the modified membrane was 46.36%, while the neat PVDF membrane was 14.09%.

scholarly journals Preparation, characterization, and photocatalytic performance of polyvinylidene fluoride membrane modified with TiO2-C hybrid aerogels

2016 ◽  
Vol 22 (3) ◽  
pp. 255-262 ◽  
Author(s):  
Jun Li ◽  
Jing Liu ◽  
Dongsu Bi ◽  
Xiaopin Guo ◽  
Peng Wang
Keyword(s):  
Mechanical Strength ◽  
Polyvinylidene Fluoride ◽  
Photocatalytic Performance ◽  
Pure Water ◽  
Water Flux ◽  
Angle Measurement ◽  
Photodegradation Rate ◽  
Pure Water Flux ◽  
Modified Membrane ◽  
Hybrid Aerogels

TiO2-C hybrid aerogels containing submicrometer anatase and carbon nanoparticles were prepared with TiCl4 and resorcinol-furfural. A modified polyvinylidene fluoride (PVDF) ultrafiltration membrane was prepared through phase inversion after dispersing the TiO2-C hybrid aerogel into a PVDF solution. The surface features, structure, and hydrophilicity of the membrane were characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, contact angle measurement, and pure water flux. The mechanical strength of this membrane was also determined. The photocatalytic performance of the modified membrane was investigated using reactive brilliant red (X-3B) as a representative contaminant. Characterization results indicated that the TiO2-C hybrid aerogels were distributed evenly in the PVDF membrane, showing enhanced hydrophilicity, mechanical strength, and pure water flux. Furthermore, the photodegradation rate of X-3B through the modified membrane was significantly high owing to the photocatalytic action of the TiO2-C hybrid aerogels distributed in the modified membrane.

Preparation and Characterization of Hydrophilic PVDF Hollow Fiber Ultrafiltration Membrane

2011 ◽  
Vol 480-481 ◽  
pp. 201-206
Author(s):  
Li Guo Wang ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
Wen Juan Liu ◽  
Shi Qi Guo ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Hollow Fiber ◽  
Polyvinylidene Fluoride ◽  
Breaking Strength ◽  
Pure Water ◽  
Water Flux ◽  
Technical Parameters ◽  
Rupture Pressure ◽  
Pure Water Flux

Hydrophilic Polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of acrylic acid grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated via orthogonal test, the technical parameters of preparation of hydrophilic PVDF membranes were determined, and hydrophilic PVDF membranes were prepared. Then hydrophilic PVDF membranes were characterized in terms of breaking strength, breaking elongation, rupture pressure, pure water flux and rejection. The fouling properties and the conditions of acrylic acid grafted onto PVDF were also examined. The results showed that acrylic acid had been grafted onto PVDF, the breaking strength and rupture pressure improved greatly, and the fouling properties were better than PS hollow fiber UF membrane.

scholarly journals Preparation, characterization and dyeing wastewater treatment of a new PVDF/PMMA five-bore UF membrane with β-cyclodextrin and additive combinations

2021 ◽  
Author(s):  
Xiaozheng Bian ◽  
Jianping Huang ◽  
Lin Qiu ◽  
Chunyan Ma ◽  
Danli Xi
Keyword(s):  
Wastewater Treatment ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Membrane Fouling ◽  
Bovine Serum ◽  
Polyvinylidene Fluoride ◽  
Hollow Fiber Membrane ◽  
Pure Water ◽  
Water Flux ◽  
Dyeing Wastewater

Abstract A new type of polyvinylidene fluoride (PVDF)/polymethyl methacrylate (PMMA) hollow fiber membrane (HFM) with five bores was prepared. The effects of Polyvinylpyrrolidone (PVP), β-cyclodextrine (β-CD), Polyethylene Glycol (PEG) and Polysorbate 80 (Tween 80) and their combinations on the PVDF/PMMA five-bore HFMs were investigated. The performance and fouling characteristics of five-bore HFMs for dyeing wastewater treatment were evaluated. Results indicated that adding 5wt.% PVP could increase the porosity and water flux of the membrane but decrease the bovine serum albumin (BSA) rejection rate. Adding 5wt.% β-CD significantly improved the tensile and rejection of the HFMs without showing effect on the increase of water flux. The characteristic of the HFMs with different additives combinations proved that the mixture of 5wt.% PVP and 1wt.% β-CD obtained the best membrane performance, with a pure water flux of 427.9 L/ m2·h, a contact angle of 25°, and a rejection to bovine serum albumin (BSA) of 89.7%. The CODcr and UV254 removal rates of dyeing wastewater treatment were 61.10% and 50.41%, respectively. No breakage or leakage points were found after 120d operation showing the reliable mechanical properties. We set the operating flux to 55 L/m2·h and cross flow rate to 10% which can effectively control membrane fouling.

scholarly journals The Modification of PVDF Membrane via Crosslinking with Chitosan and Glutaraldehyde as the Crosslinking Agent

2018 ◽  
Vol 18 (1) ◽  
pp. 1
Author(s):  
Romaya Sitha Silitonga ◽  
Nurul Widiastuti ◽  
Juhana Jaafar ◽  
Ahmad Fauzi Ismail ◽  
Muhammad Nidzhom Zainol Abidin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Vinylidene Fluoride ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Crosslinking Agent ◽  
Hydrophobic Properties ◽  
Pvdf Membrane ◽  
Pure Water Flux ◽  
Modified Membrane

Poly(vinylidene fluoride) (PVDF) has outstanding properties such as high thermal stability, resistance to acid solvents and good mechanical strength. Due to its properties, PVDF is widely used as a membrane matrix. However, PVDF membrane is hydrophobic properties, so as for specific applications, the surface of membrane needs to be modified to become hydrophilic. This research aims to modify PVDF membrane surface with chitosan and glutaraldehyde as a crosslinker agent. The FTIR spectra showed that the modified membrane has a peak at 1655 cm-1, indicating the imine group (–N=C)- that was formed due to the crosslink between amine group from chitosan and aldehyde group from glutaraldehyde. Results showed that the contact angle of the modified membrane decreases to 77.22° indicated that the membrane hydrophilic properties (< 90°) were enhanced. Prior to the modification, the contact angle of the PVDF membrane was 90.24°, which shows hydrophobic properties (> 90°). The results of porosity, Ɛ (%) for unmodified PVDF membrane was 55.39%, while the modified PVDF membrane has a porosity of 81.99%. Similarly, by modifying the PVDF membrane, pure water flux increased from 0.9867 L/m2h to 1.1253 L/m2h. The enhancement of porosity and pure water flux for the modified PVDF membrane was due to the improved surface hydrophilicity of PVDF membrane.

Fabrication and Characterization of PVDF/UiO-66(Zr) Mixed Matrix Membrane on Non-Woven PET Support

2020 ◽  
Vol 1005 ◽  
pp. 108-115
Author(s):  
John Rhoel Cementina ◽  
Michael V. Torres ◽  
Dante P. Bernabe ◽  
Stephen Lirio ◽  
Micah Belle Marie Yap Ang ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Polyvinylidene Fluoride ◽  
Gas Permeability ◽  
Metal Organic Framework ◽  
Pure Water ◽  
Polymer Concentration ◽  
Water Flux ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Metal Organic

Polyvinylidene fluoride (PVDF) membranes, enhanced with metal-organic framework (MOF), were fabricated on a non-woven polyethylene terephthalate (PET) support using the non-solvent induced phase inversion (NIPS) method to produce mixed matrix membrane (MMM). Polymer concentration of 10%, 15%, and 20% were used in the study whereas UiO-66(Zr) was used as a MOF filler. The resulting membranes were characterized in terms of their morphology, porosity, wettability, mechanical strength, pure water flux, and gas permeability. Results show that the presence of UiO-66(Zr) filler improved membrane morphology, mechanical strength, and hydrophobicity of MMM as compared to pristine PVDF.

Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride

2011 ◽  
Vol 295-297 ◽  
pp. 286-291
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shu Fang Hou ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
...  
Keyword(s):  
Maleic Anhydride ◽  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Pvdf Membrane ◽  
Technical Parameters ◽  
Pure Water Flux ◽  
Flat Membranes ◽  
Better Than

Hydrophilic polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of maleic anhydride grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated, the preparation technical parameters were determined, and the hydrophilic PVDF flat membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of pure water flux, contact angle, infrared spectroscopic analysis and scanning electron microscope(SEM). The results showed that maleic anhydride had been grafted onto PVDF, and the hydrophilic performance of the modified membrane was better than the traditional one.

Sign in / Sign up

Export Citation Format

Share Document