Influence of operating conditions on ceramic ultrafiltration membrane performance when treating textile effluents

2011 ◽  
Vol 64 (11) ◽  
pp. 2169-2176
Author(s):  
S. Barredo-Damas ◽  
M. I. Alcaina-Miranda ◽  
M. Gemma ◽  
M. I. Iborra-Clar ◽  
J. A. Mendoza-Roca

This work studies the performance of three commercial ceramic ultrafiltration membranes (ZrO2–TiO2) treating raw effluent from a textile industry. The effect of crossflow velocity at 3, 4 and 5 m s−1 as well as membrane characteristics, such as molecular weight cut-off (30, 50 and 150 kDa), on process performance were studied. Experiments were carried out in concentration mode in order to observe the effect of volume reduction factor simultaneously. Results showed a combined influence of both crossflow velocity and molecular weight cut-off on flux performance. TOC and COD removals up to 70% and 84% respectively were reached. On the other hand, almost complete color (>97%) and turbidity (>99%) removals were achieved for all the membranes and operating conditions.

2019 ◽  
Vol 3 (1) ◽  
pp. 10
Author(s):  
René Ruby-Figueroa ◽  
Monica Nardi ◽  
Giovanni Sindona ◽  
Carmela Conidi ◽  
Alfredo Cassano

The orange press liquor is a by-product of the orange juice production containing bioactive compounds recognized for their beneficial implications in human health. The recovery of these compounds offers new opportunities for the formulation of products of interest in food, pharmaceutical and cosmetic industry. The clarification of orange press liquor by microfiltration (MF) and/or ultrafiltration (UF) processes is a valid approach to remove macromolecules, colloidal particles, and suspended solids from sugars and bioactive compounds. In this work the clarification of orange press liquor was studied by using three flat-sheet polymeric membranes: a MF membrane with a pore size of 0.2 μm and two UF membranes with nominal molecular weight cut-off (MWCO) of 150 and 200 kDa, respectively. The membrane performance, in terms of permeate flux and membrane rejection towards hesperidin and sugars, was studied according to a multivariate analyses approach. In particular, characteristics influencing the performance of the investigated membranes, such as molecular weight cut-off (MWCO), contact angle, membrane thickness, pore size distribution, as well as operating conditions, including temperature, and operating time, were analysed through the partial least square regression (PLSR). The multivariate method revealed crucial information on variables which are relevant to maximize the permeate flux and to minimize the rejection of hesperidin and sugars in the clarification of orange press liquor.


1970 ◽  
Vol 24 (01/02) ◽  
pp. 026-032 ◽  
Author(s):  
N. A Marsh

SummaryMolecular exclusion chromatography was performed on samples of urine from normal and aminonucleoside nephrotic rats. Normal urine contained 2 peaks of urokinase activity, one having a molecular weight of 22,000 and the other around 200,000. Nephrotic urine contained three peaks of activity with MW’s 126,000, 60,000 and 30,000. Plasma activator determined from euglobulin precipitate had a MW. in excess of 200,000. The results indicate that in the normal animal, plasma plasminogen activator does not escape into the urine in substantial quantities but under the conditions of extreme proteinuria there may be some loss through the kidney. The alteration in urokinase output in nephrotic animals indicates a greatly disordered renal fibrinolytic enzyme system.The findings of this study largely support the hypothesis that plasma plasminogen activator of renal origin and urinary plasminogen activator (urokinase) are different molecular species.


1982 ◽  
Vol 47 (03) ◽  
pp. 197-202 ◽  
Author(s):  
Kurt Huber ◽  
Johannes Kirchheimer ◽  
Bernd R Binder

SummaryUrokinase (UK) could be purified to apparent homogeneity starting from crude urine by sequential adsorption and elution of the enzyme to gelatine-Sepharose and agmatine-Sepharose followed by gel filtration on Sephadex G-150. The purified product exhibited characteristics of the high molecular weight urokinase (HMW-UK) but did contain two distinct entities, one of which exhibited a two chain structure as reported for the HMW-UK while the other one exhibited an apparent single chain structure. The purification described is rapid and simple and results in an enzyme with probably no major alterations. Yields are high enough to obtain purified enzymes for characterization of UK from individual donors.


1996 ◽  
Vol 34 (9) ◽  
pp. 157-164 ◽  
Author(s):  
Kim C.-H. ◽  
M. Hosomi ◽  
A. Murakami ◽  
M. Okada

Effects of clay on fouling due to organic substances and clay were evaluated by model fouling materials and kaolin. Model fouling materials selected were protein, polysaccharide, fulvic acid, humic acid and algogenic matter (EOM:ectracellular organic matter, microbial decomposition products) and kaolin was selected as the clay material. Polysulfone membrane (MWCO(Molecular Weight Cut-Off) 10,000, 50,000 and 200,000) was used as an ultrafiltration membrane. In particular, the flux measurement of solutions containing algogenic matter used an ultrafiltration membrane of MWCO 50,000. The flux of protein and polysaccharide with coexistence of kaolin increased in the case of the ratio of MW/MWCO being greater than one, but did not increase in the case of the MW/MWCO ratio being below one. In contrast, the flux of fulvic acid and humic acid with coextence of kaolin decreased regardless of the ratio of MW/MWCO. The addition of dispersion agent and coagulant in the organic substances and kaolin mixture solution changed the size distribution of kaolin, and resulted in a change of the flux. EOM and microbial decomposition products decreased with the increase of the fraction of organic matter having molecular weight more than MWCO of membrane. The flux of the algogenic organic matter with coexistence of kaolin decreased with the increase of the amount of kaolin. It was suggested that the decline of the flux with coexistence of kaolin was due to the change of the resistance of the kaolin cake layer corresponding to the change in kaolin size distribution with charge.


1996 ◽  
Vol 34 (9) ◽  
pp. 149-156 ◽  
Author(s):  
C. Ratanatamskul ◽  
K. Yamamoto ◽  
T. Urase ◽  
S. Ohgaki

The recent development of new generation LPRO or nanofiltration membranes have received attraction for application in the field of wastewater and water treatment through an increasingly stringent regulation for drinking purpose and water reclamation. In this research, the application on treatment of anionic pollutants (nitrate, nitrite, phosphate, sulfate and chloride ions) have been investigated as functions of transmembrane pressure, crossflow velocity and temperature under very much lower pressure operation range (0.49 to 0.03 MPa) than any other previous research used to do. Negative rejection was also observed under very much low range of operating pressure in the case of membrane type NTR-7250. Moreover, the extended Nernst-Planck model was used for analysis of the experimental data of the rejection of nitrate, nitrite and chloride ions in single solution by considering effective charged density of the membranes.


Author(s):  
Shinji Yoshikawa ◽  
Lih-Geeng Chen ◽  
Morio Yoshimura ◽  
Yoshiaki Amakura ◽  
Tsutomu Hatano ◽  
...  

Abstract Our examination of high molecular weight polyphenolic constituents in the leaves of Barringtonia racemosa of the family Lecythidaceae uncovered five previously undescribed ellagitannins. One, barringtin M1 (1), among them was a hydrolysable tannin monomer, while remaining four, barringtins D1 (2), D2 (3), D3 (4) and barricyclin D1 (5), were all dimers. Barricyclin D1 had a first macrocyclic structure formed from casuarictin (6) and tellimagrandin I (7), and the other ellagitannins had structures related to 5. Two additional known phenolics, valoneic acid dilactone (8) and schimawalin A (9), were also isolated from the leaves. These results suggested that the leaves of B. racemosa is a natural resource rich in hydrolysable tannin oligomers.


1961 ◽  
Vol 39 (11) ◽  
pp. 2343-2352 ◽  
Author(s):  
Ernest Rivet ◽  
Real Aubin ◽  
Roland Rivest

Co-ordination complexes between diesters of α,ω-dicarboxylic acids and titanium tetrachloride, tin tetrachloride, and zirconium tetrachloride have been prepared. The analytical results, the infrared spectra, the melting points, and the molecular-weight determinations indicate that for the titanium and zirconium complexes, two types of complexes are obtained, one having a general formula MX4•1 diester in which chelate rings from five to nine atoms are formed and the other one, 2MX4•1 diester in which there are two 4-membered rings per complex molecule. With tin tetrachloride only one type of complex is formed, which has two tin tetrachlorides and two diesters per complex molecule.


2012 ◽  
Vol 602-604 ◽  
pp. 776-780
Author(s):  
Zhi Qiang Li ◽  
Mei Li ◽  
Wei Jia Fan

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)copolymer [P(3HB-co-4HB)] is a kind of biodegradable high molecular polymer produced by bioaccumulation. Because of the good biodegradability and biocompatibility, P(3HB-co-4HB)s have attracted wide attention . At first, the intrinsic viscosity[η] in good solvent of P(3HB-co-4HB) s with varying contents of 4HB was investigated in different temperature. Second, observed the changes of crystallization gathered state caused by the varying contents of 4HB by polarizing microscope. The results show that to the P(3HB-co-4HB)s in same molecular weight, the intrinsic viscosity[η] in good solvent barely changes when the mole fractions of 4HB increase. On the other hand, the mean square end to end distances[0] of macromolecular flexible chains increase with the mole fractions of 4HB. At the same time, the states of aggregation change from spherulites to dendrites. In this investigation, we discuss the reasons of the differences in depth.


Sign in / Sign up

Export Citation Format

Share Document