The evaluation of benzene and phenol biodegradation kinetics by applying non-structured models

2010 ◽  
Vol 61 (5) ◽  
pp. 1289-1298 ◽  
Author(s):  
D. E. G. Trigueros ◽  
A. N. Módenes ◽  
F. R. Espinoza-Quiñones ◽  
A. D. Kroumov

The biodegradation kinetics of the aromatic hydrocarbons benzene and phenol as single substrates and as a mixture were investigated through non-structured model analysis. The material balance equations involving the models of Monod and Andrews and representing the biodegradation kinetics of individual substrates in batch mode were numerically solved. Further, utilization of a benzene–phenol mixture was described by applying more sophisticated mathematical forms of competitive, noncompetitive and uncompetitive inhibition models as well as the sum kinetic interactions parameters (SKIP) model. In order to improve the performance of the studied models, some modifications were also proposed. The Particle Swarm Global Optimization method, coded in Maple, was applied to the parameter identification procedure of each model, where the least square method was used as a search statistical criterion. The description of the biodegradation kinetics of a benzene–phenol mixture by the competitive inhibition model was based on the information that the compounds could be catabolized via one metabolic pathway of Pseudomonas putida F1. Simulation results were in good agreement with the experimental data and proved the robustness of the applied methods and models. The developed knowledge database could be very useful in the optimization of the biodegradation processes of different bioreactor types and operational conditions.

1994 ◽  
Vol 30 (11) ◽  
pp. 143-146
Author(s):  
Ronald D. Neufeld ◽  
Christopher A. Badali ◽  
Dennis Powers ◽  
Christopher Carson

A two step operation is proposed for the biodegradation of low concentrations (< 10 mg/L) of BETX substances in an up flow submerged biotower configuration. Step 1 involves growth of a lush biofilm using benzoic acid in a batch mode. Step 2 involves a longer term biological transformation of BETX. Kinetics of biotransformations are modeled using first order assumptions, with rate constants being a function of benzoic acid dosages used in Step 1. A calibrated computer model is developed and presented to predict the degree of transformation and biomass level throughout the tower under a variety of inlet and design operational conditions.


2013 ◽  
Vol 39 (2) ◽  
pp. 359-365
Author(s):  
M. Seidler ◽  
A. Gregorczyk

In this paper, an attempt is made to apply the Verhulst-Pearl and the Robertson logistic curves to the description of maize plant growth. The changes with time of the total leaf area were taken as the parameter expressing the growth kinetics. The constant coefficients in the Verhulst-Pearl and Robertson equations were calculated with the help of a logarithmic transformation and the least square method. On this basis, the growth kinetics of the studied maize lines and hybrid were compared. The applicability of logistic curves to the description of completed growth processes was demonstrated as was the fact that Robertson's equation is better suited for mathematical calculations.


2012 ◽  
Vol 16 (3) ◽  
pp. 177-184 ◽  
Author(s):  
Mohd Zaki Sukor ◽  
Chun-Yang Yin ◽  
Robert Mikhail Savory ◽  
Suhaimi Abdul-Talib

2014 ◽  
Vol 522-524 ◽  
pp. 1542-1546
Author(s):  
Xu Zhang ◽  
Wei Hua Liu

When research the behavior of water drive gas reservoirs, especially with large water influx, the first concerned is, how many gas is sealed, how many water seals the gas? Therefore, it is very important to study the amount of water-sealing gas, unsealed gas, and water influx. The amount of unsealed gas influences the Recovery Efficiency, and the water influx influences the drainage intensity, when we take the measures of Strong Drainage Gas Recovery, in the future. In this paper, we analysis Material Balance Equation; establish objective functions with Formation Pressure and gas production data; auto-match by Least-square Method; directly calculate the dynamic reserves of water drive gas reservoir, and the amount of water-sealing gas and water influx. The example calculation of well HB1, proved that the calculation results of this method is more accurate and reliable than in the past, and it is simple and practical as well.


1981 ◽  
Vol 20 (06) ◽  
pp. 274-278
Author(s):  
J. Liniecki ◽  
J. Bialobrzeski ◽  
Ewa Mlodkowska ◽  
M. J. Surma

A concept of a kidney uptake coefficient (UC) of 131I-o-hippurate was developed by analogy from the corresponding kidney clearance of blood plasma in the early period after injection of the hippurate. The UC for each kidney was defined as the count-rate over its ROI at a time shorter than the peak in the renoscintigraphic curve divided by the integral of the count-rate curve over the "blood"-ROI. A procedure for normalization of both curves against each other was also developed. The total kidney clearance of the hippurate was determined from the function of plasma activity concentration vs. time after a single injection; the determinations were made at 5, 10, 15, 20, 30, 45, 60, 75 and 90 min after intravenous administration of 131I-o-hippurate and the best-fit curve was obtained by means of the least-square method. When the UC was related to the absolute value of the clearance a positive linear correlation was found (r = 0.922, ρ > 0.99). Using this regression equation the clearance could be estimated in reverse from the uptake coefficient calculated solely on the basis of the renoscintigraphic curves without blood sampling. The errors of the estimate are compatible with the requirement of a fast appraisal of renal function for purposes of clinical diagknosis.


1968 ◽  
Vol 19 (03/04) ◽  
pp. 364-367 ◽  
Author(s):  
H. C Hemker ◽  
P. W Hemker

SummaryThe enzyme kinetics of competitive inhibition under conditions prevailing in clotting tests are developed and a method is given to measure relative amounts of a competitive inhibitor by means of the t — D plot.


1966 ◽  
Vol 16 (01/02) ◽  
pp. 277-295 ◽  
Author(s):  
A Silver ◽  
M Murray

SummaryVarious investigators have separated the coagulation products formed when fibrinogen is clotted with thrombin and identified fibrinopeptides A and B. Two other peaks are observed in the chromatogram of the products of coagulation, but these have mostly been dismissed by other workers. They have been identified by us as amino acids, smaller peptides and amorphous material (37). We have re-chromatographed these peaks and identified several amino acids. In a closed system of fibrinogen and thrombin, the only reaction products should be fibrin and peptide A and peptide B. This reasoning has come about because thrombin has been reported to be specific for the glycyl-arginyl peptide bond. It is suggested that thrombin also breaks other peptide linkages and the Peptide A and Peptide B are attacked by thrombin to yield proteolytic products. Thrombin is therefore probably not specific for the glycyl-arginyl bond but will react on other linkages as well.If the aforementioned is correct then the fibrinopeptides A and B would cause an inhibition with the coagulation mechanism itself. We have shown that an inhibition does occur. We suggest that there is an autoinhibition to the clotting mechanism that might be a control mechanism in the human body.The experiment was designed for coagulation to occur under controlled conditions of temperature and time. Purified reactants were used. We assembled an apparatus to record visually the speed of the initial reaction, the rate of the reaction, and the density of the final clot formed after a specific time.The figures we derived made available to us data whereby we could calculate and plot the information to show the mechanism and suggest that such an inhibition does exist and also further suggest that it might be competitive.In order to prove true competitive inhibition it is necessary to fulfill the criteria of the Lineweaver-Burk plot. This has been done. We have also satisfied other criteria of Dixon (29) and Bergman (31) that suggest true competitive inhibition.


2015 ◽  
Vol 5 (2) ◽  
pp. 1
Author(s):  
Miftahol Arifin

The purpose of this research is to analyze the influence of knowledge management on employee performance, analyze the effect of competence on employee performance, analyze the influence of motivation on employee performance). In this study, samples taken are structural employees PT.centris Kingdom Taxi Yogyakarta. The analysis tool in this study using multiple linear regression with Ordinary Least Square method (OLS). The conclusion of this study showed that the variables of knowledge management has a significant influence on employee performance, competence variables have an influence on employee performance, motivation variables have an influence on employee performance, The analysis showed that the variables of knowledge management, competence, motivation on employee performance.Keywords: knowledge management, competence, motivation, employee performance.


Sign in / Sign up

Export Citation Format

Share Document