Biofilm/membrane filtration for reclamation and reuse of rural wastewaters

2009 ◽  
Vol 59 (11) ◽  
pp. 2145-2152 ◽  
Author(s):  
Kil-Soo Hyun ◽  
Seok-Ju Lee
Keyword(s):  
Wastewater Treatment ◽  
Rural Areas ◽  
Membrane Filtration ◽  
Wastewater Treatment Plants ◽  
Domestic Wastewater ◽  
Effluent Quality ◽  
Black Water ◽  
Stage Process ◽  
Water Quality And Quantity ◽  
Filter Bed

To cost-effectively meet water quality and quantity requirements for rural areas, the objective of this research was to evaluate the performances of a three-stage process of anaerobic-oxic-anoxic biofilm filtration (AOBF) and membrane filtration (MF) processes and to assess the potential for reclamation and reuse of blended wastewater contained domestic wastewater, black water, and landfill leachate. The AOBF process at < LV 30 m/day showed good removal results of >90% for conventional pollutants (>75% for COD) and >70% for nutrient. Influent step-feeding with 0.8Q into filter bed 1 and 0.2Q into filter bed 2 achieved denitrification efficiency of 5–10% higher than without step feed. Efficiencies of plate membrane removal were greater than 90% for COD and more than approximate 75% for nutrients and heavy metals, respectively. The AOBF/MF system showed excellent removal results of >90–95% for soluble nutrients as well as nonsoluble fractions such as TSS, particulate COD. The effluent of AOBF/MF system met the reuse standard for industrial and agricultural water, while effluent of AOBF met the standard for the effluent quality of wastewater treatment plants. These results indicate that the AOBF/MF system was suitable for rural integrated wastewater treatment by achieving cost-effectively an effluent quality able to be used for industrial, agricultural and water bodies recharge purposes.

Feasibility of contact aeration method for small-scale domestic wastewater treatment system in rural China

2012 ◽  
Vol 7 (2) ◽  
Author(s):  
T. Kuyama ◽  
M. Mizuochi ◽  
H. Koyanagi ◽  
T. Wako
Keyword(s):  
Wastewater Treatment ◽  
Rural Areas ◽  
Wastewater Treatment Plants ◽  
Rural China ◽  
Domestic Wastewater ◽  
Treated Wastewater ◽  
Small Scale ◽  
Billing System ◽  
Domestic Wastewater Treatment ◽  
Treatment Facilities

This study examines the feasibility of the contact aeration method for utilisation in small-scale domestic wastewater treatment facilities in various rural areas of China, where the national government starts to address the water pollution issue. Three pilot facilities using the contact aeration method with different capacities were constructed, operated and monitored in Chongqing city and Jiangsu province. In order to evaluate the feasibility of the constructed facilities, the quality of treated wastewater and the operational cost were monitored. Results obtained from the monitoring showed that BOD and COD effluent concentrations achieved quality targets in all facilities. As for the other pollutants, quality targets were met for most of the period. Operational costs of facilities bettered those set for the facility in the town of Baiyang and new village of Zhaojia, but exceeded them for the facility in the village of Dongbei. The main reasons for the differences were the electricity billing system and operational system for each facility. In order to promote small-scale aeration-based domestic wastewater treatment plants in rural China in the future, the issue of what constitutes efficient facility maintenance first needs to be addressed.

Performance comparison of direct membrane separation and membrane bioreactor for domestic wastewater treatment and water reuse

2001 ◽  
Vol 1 (5-6) ◽  
pp. 315-323 ◽  
Author(s):  
K.-H. Ahn ◽  
K.-G. Song ◽  
I.-T. Yeom ◽  
K.-Y. Park
Keyword(s):  
Wastewater Treatment ◽  
Water Reuse ◽  
Membrane Filtration ◽  
Membrane Bioreactor ◽  
Membrane Separation ◽  
Domestic Wastewater ◽  
Filtration Resistance ◽  
Effluent Quality ◽  
Legal Standards ◽  
Domestic Wastewater Treatment

Two pilot-scale wastewater treatment systems - direct membrane separation (DMS) and membrane bioreactor (MBR) systems - were designed and constructed in order to investigate the feasibility of membrane filtration technology for domestic wastewater treatment and water reuse. A submerged-type hollow-fiber microfiltration (HF-MF) membrane module with pore size of 0.1μm was employed to build each pilot system. The systems were tested using low- and high-strength domestic wastewaters and the system performance was continuously monitored for a long period to compare filtration characteristics and effluent quality in each system. The MBR system showed much better performance than the DMS system in terms of filtration characteristics and effluent quality. Even though the mixed-liquor suspended solid (MLSS) content in the MBR system was much higher than that in the DMS system, the MBR filtration resistance was much lower than the DMS filtration resistance. The DMS system was not able to remove dissolved organic matter, which seemed to be a major component of membrane fouling. The MBR effluent quality such as COD, BOD, TOC and T-N was more stable and better than the DMS. In the MBR process, the organic removal efficiency remained more than 95% regardless of fluctuation in influent qualities. The effluent quality of both systems was satisfying the legal standards for water reuse in Korea. Rejection of pathogenic microorganisms by membrane filtration was also investigated.

Bottlenecks in the Implementation of On-Site Wastewater Treatment Plants on a Large Scale in The Netherlands

1990 ◽  
Vol 22 (3-4) ◽  
pp. 291-298
Author(s):  
Frits A. Fastenau ◽  
Jaap H. J. M. van der Graaf ◽  
Gerard Martijnse
Keyword(s):  
Wastewater Treatment ◽  
The Netherlands ◽  
Large Scale ◽  
Wastewater Treatment Plants ◽  
Housing Stock ◽  
Research Work ◽  
Field Research ◽  
Domestic Wastewater ◽  
Research Programme ◽  
Definition Of

More than 95 % of the total housing stock in the Netherlands is connected to central sewerage systems and in most cases the wastewater is treated biologically. As connection to central sewerage systems has reached its economic limits, interest in on-site treatment of the domestic wastewater of the remaining premises is increasing. A large scale research programme into on-site wastewater treatment up to population equivalents of 200 persons has therefore been initiated by the Dutch Ministry of Housing, Physical Planning and Environment. Intensive field-research work did establish that the technological features of most on-site biological treatment systems were satisfactory. A large scale implementation of these systems is however obstructed in different extents by problems of an organisational, financial and/or juridical nature and management difficulties. At present research is carried out to identify these bottlenecks and to analyse possible solutions. Some preliminary results are given which involve the following ‘bottlenecks':-legislation: absence of co-ordination and absence of a definition of ‘surface water';-absence of subsidies;-ownership: divisions in task-setting of Municipalities and Waterboards; divisions involved with cost-sharing;-inspection; operational control and maintenance; organisation of management;-discharge permits;-pollution levy;-sludge disposal. Final decisions and practical elaboration of policies towards on-site treatment will have to be formulated in a broad discussion with all the authorities and interest groups involved.

Danish Experience with Emergent Hydrophyte Treatment Systems (EHTS) and Prospects in the Light of Future Requirements on Outlet Water Quality

1990 ◽  
Vol 22 (3-4) ◽  
pp. 65-72 ◽  
Author(s):  
H.-H. Schierup ◽  
H. Brix
Keyword(s):  
Wastewater Treatment ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Wastewater Treatment Plants ◽  
Sewage Treatment ◽  
Reed Beds ◽  
Effluent Quality ◽  
Multi Stage ◽  
Run Off ◽  
Stage System

Since 1983 approximately 150 full-scale emergent hydrophyte based wastewater treatment plants (reed beds) have been constructed in Denmark to serve small wastewater producers. The development of purification performance for 21 plants representing different soil types, vegetation, and hydraulic loading rates has been recorded. Cleaning efficiencies were typically in the range of 60-80% reduction for BOD, 25-50% reduction for total nitrogen, and 20-40% reduction for total phosphorus. The mean effluent BOD, total nitrogen and total phosphorus concentrations of the reed beds were 19 ± 10, 22 ± 9 and 6.7 ± 3.2 mg/l (mean ± SD), respectively. Thus, the general Danish effluent standards of 8 mg/l for N and 1.5 mg/l for P for sewage plants greater than 5,000 PE cannot be met by the present realised design of EHTS. The main problem observed in most systems is a poor development of horizontal hydraulic conductivity in the soil which results in surface run-off. Since the political demands for effluent quality will be more strict in the future, it is important to improve the performance of small decentral sewage treatment plants. On the basis of experiences from different types of macrophyte based and conventional low-technology wastewater treatment systems, a multi-stage system is suggested, consisting of sedimentation and sand filtration facilities followed by basins planted with emergent and submergent species of macrophytes and algal ponds.

Automatic buffer capacity based sensor for effluent quality monitoring

1996 ◽  
Vol 33 (1) ◽  
pp. 81-87
Author(s):  
L. Van Vooren ◽  
P. Willems ◽  
J. P. Ottoy ◽  
G. C. Vansteenkiste ◽  
W. Verstraete
Keyword(s):  
Wastewater Treatment ◽  
Buffer Capacity ◽  
Wastewater Treatment Plants ◽  
Data Interpretation ◽  
Full Scale ◽  
Quality Monitoring ◽  
Effluent Quality ◽  
Capacity Curves ◽  
On Line

The use of an automatic on-line titration unit for monitoring the effluent quality of wastewater plants is presented. Buffer capacity curves of different effluent types were studied and validation results are presented for both domestic and industrial full-scale wastewater treatment plants. Ammonium and ortho-phosphate monitoring of the effluent were established by using a simple titration device, connected to a data-interpretation unit. The use of this sensor as the activator of an effluent quality proportional sampler is discussed.

Evaluation of Small Wastewater Treatment Plants in the County of Århus – Denmark

1993 ◽  
Vol 28 (10) ◽  
pp. 33-41
Author(s):  
Jes la Cour Jansen ◽  
Bodil Mose Pedersen ◽  
Erik Moldt
Keyword(s):  
Wastewater Treatment ◽  
Constructed Wetlands ◽  
Biological Treatment ◽  
Wastewater Treatment Plants ◽  
Chemical Precipitation ◽  
Common Type ◽  
Treatment Efficiency ◽  
Effluent Quality ◽  
Different Types

Influent and effluent data from about 120 small wastewater treatment plants (100 - 2000 PE) have been collected and processed. Seven different types of plants are represented. The effluent quality and the treatment efficiency have been evaluated. The most common type of plant is mechanical/biological treatment plants. Some of them are nitrifying and some are also extended for chemical precipitation of phosphorus. Constructed wetlands and biological sandfilters are also represented among the small wastewater treatment plants.

scholarly journals Energetic flexibility on wastewater treatment plants

2017 ◽  
Vol 76 (5) ◽  
pp. 1225-1233 ◽  
Author(s):  
M. Schäfer ◽  
I. Hobus ◽  
T. G. Schmitt
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Energy Systems ◽  
Energy Market ◽  
Control Parameters ◽  
Effluent Quality ◽  
The Future ◽  
Energy Consuming ◽  
Characteristic Values ◽  
And Control

In the future, an additional potential of control reserve as well as storage capacities will be required to compensate fluctuating renewable energy availability. The operation of energy systems will change and flexibility in energy generation and consumption will rise to a valuable asset. Wastewater treatment plants (WWTPs) are capable of providing the flexibility needed, not only with their energy generators but also in terms of their energy consuming aggregates on the plant. To meet challenges of the future in regard to energy purchase and to participate in and contribute to such a volatile energy market, WWTPs have to reveal their energetic potential as a flexible service provider. Based on the evaluated literature and a detailed analysis of aggregates on a pilot WWTP an aggregate management has been developed to shift loads and provide a procedure to identify usable aggregates, characteristic values and control parameters to ensure effluent quality. The results show that WWTPs have a significant potential to provide energetic flexibility. Even for vulnerable components such as aeration systems, load-shifting is possible with appropriate control parameters and reasonable time slots without endangering system functionality.

Performance evaluation of different wastewater treatment technologies operating in a developing country

2011 ◽  
Vol 1 (1) ◽  
pp. 37-56 ◽  
Author(s):  
Sílvia C. Oliveira ◽  
Marcos von Sperling
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Septic Tank ◽  
Operational Parameters ◽  
Technical Literature ◽  
Effluent Quality ◽  
Loading Rates ◽  
Treatment Processes ◽  
Treatment Technologies ◽  
Uasb Reactors

This article analyses the performance of 166 wastewater treatment plants operating in Brazil, comprising six different treatment processes: septic tank + anaerobic filter, facultative pond, anaerobic pond + facultative pond, activated sludge, UASB reactors alone, UASB reactors followed by post-treatment. The study evaluates and compares the observed effluent quality and the removal efficiencies in terms of BOD, COD, TSS, TN, TP and FC with typical values reported in the technical literature. In view of the large performance variability observed, the existence of a relationship between design/operational parameters and treatment performance was investigated. From the results obtained, no consistent relationship between loading rates and effluent quality was found. The influence of loading rates differed from plant to plant, and the effluent quality was dictated by several combined factors related to design and operation.

History and Current Situation of Night Soil Treatment Systems and Decentralized Wastewater Treatment Systems in Japan

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
X.M. Yang ◽  
A. Morita ◽  
I. Nakano ◽  
Y. Kushida ◽  
H. Ogawa
Keyword(s):  
Wastewater Treatment ◽  
Rural Areas ◽  
Urban Areas ◽  
Domestic Wastewater ◽  
Soil Treatment ◽  
Decentralized System ◽  
Decentralized Wastewater Treatment ◽  
Rapid Economic Growth ◽  
Unique System ◽  
Wastewater Treatment Systems

In Japan, night soil, or black water, was formerly used as fertilizer for agriculture. However, during the rapid economic growth that took place after 1960, chemical fertilizers began to be adopted for agriculture and night soil was almost abandoned. How to treat the excess of night soil then became a big challenge to tackle. From that time a variety of night soil treatment technologies have been developed and the Japanese government has actively promoted the construction of night soil treatment facilities all over the country. As measures for domestic wastewater treatment, sewerage systems were spread in high-density urban areas, while a decentralized system called johkasou was diffused in rural areas with low population density. Johkasou is a unique system that was devised in Japan and mainly treats domestic wastewater on-site. Night soil treatment systems and decentralized wastewater treatment systems used in Japan are introduced in this paper, in the hope that the experience acquired in Japan will contribute to improve the sanitation conditions in other countries.

scholarly journals The role of wastewater treatment plants in surface water contamination by plastic pollutants

2018 ◽  
Vol 45 ◽  
pp. 00054 ◽  
Author(s):  
Bozena Mrowiec
Keyword(s):  
Wastewater Treatment ◽  
Surface Water ◽  
Water Contamination ◽  
Membrane Filtration ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Point Sources ◽  
Municipal Sewage ◽  
Municipal Wastewater Treatment ◽  
Surface Water Contamination

The aim of this paper was to review the literature data regarding the physico-chemical characteristic of plastic pollutants discharged with municipal sewage, the practical possibility of removing microplastic particles from wastewater during different treatment steps in WWTPs and the problem of surface water contamination within them. Microplastics (the size range of 1 nm to < 5 mm), have been recognized as an emerging threat, as well as an ecotoxicological and ecological risk for water ecosystems. Municipal wastewater treatment plants (WWTPs) are mentioned as the main point sources of microplastics in an aquatic environment. Microplastic particles can be effectively removed in the primary treatment zones via solids skimming and sludge settling processes. Different tertiary treatment processes such as: gravity sand filtration, discfilter, air flotation and membrane filtration provide substantial additional removal of microplastics, and the efficiency of wastewater treatment process can be at a removal level of 99.9%. Nevertheless, given the large volumes of effluent constantly discharged to receivers, even tertiary level WWTPs may constitute a considerable source of microplastics in the surface water.

Sign in / Sign up

Export Citation Format

Share Document