Aerobic moving bed bioreactor performance: a comparative study of removal efficiencies of kraft mill effluents from Pinus radiata and Eucalyptus globulus as raw material

2009 ◽  
Vol 59 (3) ◽  
pp. 507-514 ◽  
Author(s):  
C. A. Villamar ◽  
M. Jarpa ◽  
J. Decap ◽  
G. Vidal
Keyword(s):  
Molecular Weight ◽  
Pinus Radiata ◽  
Eucalyptus Globulus ◽  
Weight Fraction ◽  
N:P Ratio ◽  
Raw Material ◽  
Moving Bed ◽  
Kraft Mill ◽  
Removal Efficiencies ◽  
Bioreactor Performance

A Moving Bed Bioreactor (MBBR) was operated during 333 days. Two different effluents were fed in six different phases. Phases I and II were fed with effluent where Pinus radiata was used as raw material, while phases III to VI were fed with effluent where Eucalyptus globulus was used as raw material. The HRT was reduced from 85 to 4 h, and the BOD5:N:P ratio (100:5:1, 100:3:1 and 100:1:1) was also simultaneously evaluated as an operation strategy. When MBBR was operated with Pinus radiata influent, the performance presents a high BOD5 removal level (above 95%), although COD removal is below 60%. Most of the recalcitrant COD contained in the effluent has a molecular weight higher than 10,000 Da. When MBBR was operated with Eucalyptus globulus influent, the performance is around 97.9-97.6% and 68.6-65.1% for BOD5 and COD, respectively (with HRT up to 17 h). In the Pinus radiata and Eucalyptus globus effluents, the color was mainly found in the molecular weight fraction up to 10,000 Daltons.

STUDY OF PROTEIN FRACTIONS OF HIGH-TEMPERATURE HYDROLYZATES OBTAINED FROM SMOKED SPRAT HEADS

Fisheries ◽  
2020 ◽  
Vol 2020 (2) ◽  
pp. 113-117
Author(s):  
Olga Mezenova ◽  
Vladimir Wolkov ◽  
Larisa Baydalinova ◽  
Natalia Mezenova ◽  
Svetlana Agafonova ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Chemical Composition ◽  
Raw Materials ◽  
Weight Fraction ◽  
Water Soluble ◽  
Protein Fractions ◽  
Raw Material ◽  
Organoleptic Characteristics ◽  
Pre Treatment ◽  
Peptide Fractions

The authors study three fractions obtained as a result of hydrolysis of smoked sprat heads (under temperature of 130oC and presser of 0.25 MPa) – fat, protein water-soluble, and protein-and-mineral ones. Waste from sprat production of two fish canning complexes of the Kaliningrad Region - “RosCon” and “Kolkhoz for the Motherland” - was used as raw material. Hydrolysis was carried out in an aqueous medium in two ways - with preliminary separation of fat and without this operation. The protein fraction was sublimated and its quantitative and qualitative indices were examined - mass yield, solubility, chemical composition and molecular fractional composition of the obtained peptide fractions were determined. The output of sublimated protein fractions is practically independent of the type of raw material and the method of pre-treatment and is 6.47.9% of the mass of raw materials. The chemical composition of protein fractions varies widely in terms of fat (1.4–8.3%), minerals (9.8–13.4%) and proteins (72.1–80.2%). The solubility of the peptide fractions ranged from 91-98%. The molecular weight assessment results showed a high content of a low molecular weight fraction of peptides with an MM of less than 10 kDa in all experimental samples (about 38%). This indicates a high digestibility and biological value of the obtained peptide compositions. Sublimated peptide compositions had typical organoleptic characteristics, pleasant aroma and taste of smoked fish. Ключевые

Effect of organic load and nutrient ratio on the operation stability of the moving bed bioreactor for kraft mill wastewater treatment and the incidence of polyhydroxyalkanoate biosynthesis

2012 ◽  
Vol 66 (2) ◽  
pp. 370-376 ◽  
Author(s):  
G. Pozo ◽  
C. A. Villamar ◽  
M. Martínez ◽  
G. Vidal
Keyword(s):  
Wastewater Treatment ◽  
N:P Ratio ◽  
Organic Load ◽  
Moving Bed ◽  
Nutrient Ratio ◽  
Load Rate ◽  
Operation Stability ◽  
Kraft Mill ◽  
Five Phases ◽  
Relationship Of

This paper studies the effect of organic load rate (OLR) and nutrient ratio on operation stability of the moving bed bioreactor (MBBR) for kraft mill wastewater treatment, analyzing the incidence of polyhydroxyalkanoate (PHA) production. The MBBR operating strategy was to increase OLR from 0.25 ± 0.05 to 2.41 ± 0.19 kg COD m−3 d−1 between phases I and IV. The BOD5:N:P ratio (100:5:1 and 100:1:0.2) was evaluated as an operation strategy for phases IV to V. A stable MBBR operation was found when the OLR was increased during 225 days in five phases. The maximum absolute fluorescence against the proportion of cells accumulating PHA was obtained for an OLR of 2.41 ± 0.19 kg COD m−3d−1 and a BOD5:N:P relationship of 100:1:0.2. The increase of PHA biosynthesis is due to the increased OLR and is not attributable to the increased cell concentration, which is maintained constant in stationary status during bioreactor biosynthesis.

Monitoring endocrine activity in kraft mill effluent treated by aerobic moving bed bioreactor system

2010 ◽  
Vol 62 (1) ◽  
pp. 154-161 ◽  
Author(s):  
S. Chamorro ◽  
G. Pozo ◽  
M. Jarpa ◽  
V. Hernandez ◽  
J. Becerra ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Gas Chromatography ◽  
Pinus Radiata ◽  
Estrogenic Activity ◽  
Solid Phase ◽  
Gas Chromatography Mass Spectrometry ◽  
Endocrine Activity ◽  
Moving Bed ◽  
Chromatography Mass Spectrometry ◽  
Kraft Mill

A Moving Bed Bioreactor (MBBR) was operated at three different hydraulic retention times for a period of 414 days. The fate of the extractive compounds and the estrogenic activity of the Pinus radiata kraft mill effluents were evaluated using Yeast Estrogen Screen (YES) and gas chromatography – mass spectrometry (GC-MS) detection. Results show that the MBBR reactor is able to remove between 80–83% of estrogenic activity present in the kraft mill Pinus radiata influent, where the values of the effluent's estrogenic activity ranged between 0.123–0.411 ng L−1, expressed as estrogenic equivalent (EEqs) of 17-a-ethynylestradiol (EE2 eq.). Additionally, the biomass of the MBBR reactor accumulated estrogenic activity ranging between 0.29–0.37 ng EEqs EE2 during the different Hydraulic Retention Time (HRT) operations. The main groups present in pulp mills effluents, corresponding to fatty acids, hydrocarbons, phenols, sterols and triterpenes, were detected by solid phase extraction (SPE) and gas chromatography – mass spectrometry (GC-MS). The results suggest that the sterols produce the estrogenic activity in the evaluated effluent.

Studies on the Functionality of Newly Synthesized Fibrinogen after Treatment of Acute Myocardial Infarction with Streptokinase, Increase in the Rate of Fibrinopeptide Release

1993 ◽  
Vol 70 (06) ◽  
pp. 0978-0983 ◽  
Author(s):  
Edelmiro Regano ◽  
Virtudes Vila ◽  
Justo Aznar ◽  
Victoria Lacueva ◽  
Vicenta Martinez ◽  
...  
Keyword(s):  
Myocardial Infarction ◽  
Acute Myocardial Infarction ◽  
Molecular Weight ◽  
Steady State ◽  
High Molecular Weight ◽  
Coronary Arteries ◽  
Risk Index ◽  
Weight Fraction ◽  
High Molecular Weight Fraction ◽  
Fibrinopeptide A

SummaryIn 15 patients with acute myocardial infarction who received 1,500,000 U of streptokinase, the gradual appearance of newly synthesized fibrinogen and the fibrinopeptide release during the first 35 h after SK treatment were evaluated. At 5 h the fibrinogen circulating in plasma was observed as the high molecular weight fraction (HMW-Fg). The concentration of HMW-Fg increased continuously, and at 20 h reached values higher than those obtained from normal plasma. HMW-Fg represented about 95% of the total fibrinogen during the first 35 h. The degree of phosphorylation of patient fibrinogen increased from 30% before treatment to 65% during the first 5 h, and then slowly declined to 50% at 35 h.The early rates of fibrinopeptide A (FPA) and phosphorylated fibrinopeptide A (FPAp) release are higher in patient fibrinogen than in isolated normal HMW-Fg and normal fibrinogen after thrombin addition. The early rate of fibrinopeptide B (FPB) release is the same for the three fibrinogen groups. However, the late rate of FPB release is higher in patient fibrinogen than in normal HMW-Fg and normal fibrinogen. Therefore, the newly synthesized fibrinogen clots faster than fibrinogen in the normal steady state.In two of the 15 patients who had occluded coronary arteries after SK treatment the HMW-Fg and FPAp levels increased as compared with the 13 patients who had patent coronary arteries.These results provide some support for the idea that an increased synthesis of fibrinogen in circulation may result in a procoagulant tendency. If this is so, the HMW-Fg and FPAp content may serve as a risk index for thrombosis.

In Vivo Studies on the Inhibition of Coagulation by Fractionated Heparin and by a Heparin Analogue I. Effects of Heparin Fractions

1981 ◽  
Vol 46 (03) ◽  
pp. 612-616 ◽  
Author(s):  
U Schmitz-Huebner ◽  
L Balleisen ◽  
F Asbeck ◽  
J van de Loo
Keyword(s):  
Molecular Weight ◽  
Day Treatment ◽  
Gel Filtration ◽  
Weight Fraction ◽  
In Vivo Studies ◽  
Low Molecular Weight ◽  
High Molecular Weight Fraction ◽  
Platelet Factor ◽  
Heparin Fractions

SummaryHigh and low molecular weight heparin fractions obtained by gel filtration chromatography of sodium mucosal heparin were injected subcutaneously into six healthy volunteers and compared with the unfractionated substance in a cross-over trial. Equal doses of 5,000 U were administered twice daily over a period of three days and heparin activity was repeatedly controlled before and 2, 4, 8 hrs after injection by means of the APTT, the anti-Xa clotting test and a chromogenic substrate assay. In addition, the in vivo effect of subcutaneously administered fractionated heparin on platelet function was examined on three of the volunteers. The results show that s.c. injections of the low molecular weight fraction induced markedly higher anti-Xa activity than injections of the other preparations. At the same time, APTT results did not significantly differ. Unfractionated heparin and the high molecular weight fraction enhanced ADP-induced platelet aggregation and collagen-mediated MDA production, while the low molecular weight fraction hardly affected these assays, but potently inhibited thrombin-induced MDA production. All heparin preparations stimulated the release of platelet Factor 4 in plasma. During the three-day treatment periods, no side-effects and no significant changes in the response to heparin injections were detected.

scholarly journals ‘Tanned’ gelatin spheres and granules for exclusion chromatography

1968 ◽  
Vol 108 (4) ◽  
pp. 641-646 ◽  
Author(s):  
A. Polson ◽  
W. Katz
Keyword(s):  
Molecular Weight ◽  
Polyethylene Glycol ◽  
High Molecular Weight ◽  
Weight Fraction ◽  
High Flow ◽  
High Molecular Weight Fraction ◽  
Flow Rates ◽  
Protein Molecules ◽  
Exclusion Chromatography

1. The preparation of tanned gelatin spheres and granules from high-molecular-weight gelatin is described. This material is comparatively hard, giving high flow rates, is insoluble in water at temperatures between 0° and 100° and is resistant to digestion by trypsin and chymotrypsin. The high-molecular-weight fraction of gelatin was prepared by precipitation with polyethylene glycol, and the spheres and granules prepared from this fraction were hardened and insolubilized by tanning with either formalin or chromium salts or both. 2. The spheres and granules were used successfully for the separation of protein molecules and other protein-aceous materials ranging in molecular weight from 200 to greater than 6000000. This gel exclusion material has several properties superior to those of other products used for similar purposes. Further, it was noticed that the porosity of the spheres differed considerably from that of the granules.

Sign in / Sign up

Export Citation Format

Share Document