Study on control of micro-pollutants by BAC filtration

2008 ◽  
Vol 58 (3) ◽  
pp. 677-682 ◽  
Author(s):  
Z. H. Zhang ◽  
L. Shao
Keyword(s):  
Contact Time ◽  
Continuous Operation ◽  
The Other ◽  
Formation Potential ◽  
Term Operation ◽  
Correlative Analysis ◽  
Trihalomethane Formation Potential ◽  
One Year ◽  
Micro Pollutants

The objective of this research was to evaluate removal efficiency of micro-pollutants in a BAC filter that followed ozonation for long term operation. The experimental results showed that after continuous operation for one year BAC filter still maintained a removal of 15 ∼ 20% for CODMn and 20 ∼ 30% of removal for UV254. Correlative analysis based on lots of data found that empty bed contact time (EBCT) instead of flow rate could obviously impact on removal effect of micro-pollutants in BAC filter. And the optimal relationship between EBCT and removal effect of micro-pollutants for BAC filter was logarithm. On the other hand, long term running of BAC filter proved that there was a good removal of chloroform formation potential, but the removal of brominated trihalomethane formation potential decline with further bromization, even there appeared to be formation of bromoform in BAC filter.

scholarly journals A Conservative Approach to a Peripheral Ameloblastoma

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Rocco Borrello ◽  
Elia Bettio ◽  
Christian Bacci ◽  
Marialuisa Valente ◽  
Stefano Sivolella ◽  
...  
Keyword(s):  
Oral Cavity ◽  
Soft Tissues ◽  
Complete Removal ◽  
The Other ◽  
Conservative Approach ◽  
Choice Of Treatment ◽  
Long Term Follow Up ◽  
One Year

Peripheral Ameloblastoma (PA) is the rarest variant of ameloblastoma. It differs from the other subtypes of ameloblastoma in its localization: it arises in the soft tissues of the oral cavity coating the tooth bearing bones. Generally, it manifests nonaggressive behavior and it can be treated with complete removal by local conservative excision. In this study we report a case of PA of the maxilla in a 78-year-old female patient and we describe the four different histopathological patterns revealed by histological examination. After local excision and diagnosis, we planned a long term follow-up: in one year no recurrence had been reported. The choice of treatment is illustrated in Discussion.

scholarly journals Common Chord Progressions and Feelings of Remembering

2020 ◽  
Vol 3 ◽  
pp. 205920432091684
Author(s):  
Ivan Jimenez ◽  
Tuire Kuusi ◽  
Christopher Doll
Keyword(s):  
Popular Music ◽  
North American ◽  
Musical Training ◽  
The Other ◽  
Long Term Memory ◽  
Term Memory ◽  
One Year

Although Western tonal syntax can generate a very large number of chord successions of various lengths and degrees of complexity, some types of music, from Renaissance dances to recent pop, tend to rely more heavily on the repetition of relatively simple, short harmonic patterns. Doll recently identified short chord progressions commonly found in North American and British popular music and proposed that these chord progressions can be stored in long-term memory in the form of harmonic schemata that allow listeners to hear them as stereotypical chord progressions. However, considering the challenges that many listeners face when trying to consciously grasp harmony, it seems likely that the feelings of remembering chord progressions varies from listener to listener. To investigate these potential differences, we asked 231 listeners with various levels of musical training to rate their confidence on whether or not they had previously heard six diatonic four-chord progressions. To control for the effect of extra-harmonic features, we instantiated the chord progressions in a way that resembled the piano of a famous song and controlled for participants’ familiarity with that song and whether they had played its chords. We found that ratings correlated with typicality for the two groups of participants who had played an instrument for at least one year and to a lesser extent for the other participants. Additionally, all our players thought of specific songs more often and mentioned songs that better matched the stimuli in harmonic terms. What we did not find, however, was any effect associated to how long participants had played an instrument or the type of the instrument they had played. Our research supports the notion that both musical training and extra-harmonic features affect listeners’ feelings of remembering chord progressions.

scholarly journals Classification of hospital and urban wastewater resistome and microbiota over time and their relationship to the eco-exposome

2019 ◽  
Author(s):  
Elena Buelow ◽  
Andreu Rico ◽  
Margaux Gaschet ◽  
José Lourenço ◽  
Sean P. Kennedy ◽  
...  
Keyword(s):  
Significant Variation ◽  
Urban Wastewater ◽  
Related Risk ◽  
Variate Analysis ◽  
One Year ◽  
The Impact ◽  
Micro Pollutants ◽  
Over Time

AbstractWastewaters (WW) are important sources for the dissemination of antimicrobial resistance (AMR) into the environment. Hospital WW (HWW) contain higher loads of micro-pollutants and AMR markers than urban WW (UWW). Little is known about the long-term dynamics of H and U WW and the impact of their joined treatment on the general burden of AMR. Here, we characterized the resistome, microbiota and eco-exposome signature of 126 H and U WW samples treated separately for three years, and then mixed, over one year. Multi-variate analysis and machine learning revealed a robust signature for each WW with no significant variation over time before mixing, and once mixed, both WW closely resembled U signatures. We demonstrated a significant impact of pharmaceuticals and surfactants on the resistome and microbiota of H and U WW. Our results present considerable targets for AMR related risk assessment of WW.

Effect of Initial Bainite Microstructure on Tensile Properties After Long-Term Exposure at Elevated Temperature

2018 ◽  
Author(s):  
Junji Shimamura ◽  
Shusaku Ota ◽  
Tomoyuki Yokota ◽  
Ryuji Muraoka
Keyword(s):  
Heat Treatment ◽  
Tensile Properties ◽  
The Other ◽  
Accelerated Cooling ◽  
Oil Sand ◽  
Initial Strength ◽  
Term Operation ◽  
Steel Pipes ◽  
Bainite Microstructure

In the oil sand production field in Canada, steel pipes are used for injecting steam into the sands. Pipes for steam distribution are subjected to high operating temperature such as 350 degrees C for a long time. In this study, in order to insure the reliability of high strength pipe for steam distribution, long-term heating tests were conducted for X80 grade UOE pipe. To simulate the long-term operation at 350 degrees C for 40 years, accelerated tests were conducted at 400 degrees C for up to 4400 hours. The effect of initial bainite microstructure on tensile properties after long-term heat treatment was investigated by using two kinds of steel pipes with different bainite microstructure. One is accelerated cooling (ACC) type, and the other is heating on-line process (HOP) type just after accelerated cooling in plate manufacturing process. It was revealed that strength decrease in ACC type steels produced by only accelerated cooling was mainly governed by decomposition of hard phase MA (Martensite-Austenite constituent) and recovery of dislocations. On the other hand, HOP type steels had small amount of MA and nanometer-sized carbides by applying HOP after accelerated cooling. The HOP type steels had almost the same initial strength in spite of small amount of MA. Fine niobium carbides gave enough precipitation strengthening. Formation of fine niobium carbides was promoted by the addition of niobium. The precipitates were stable after long-term heat treatment at 400 degrees C. It is confirmed that the fine niobium carbides in HOP type steels remained even after long-term heat treatment. The suppression of initial MA also lead to minimize the strength decrease by MA decomposition. Therefore, HOP type steels tend to have higher resistance to the strength decrease after long-term heat treatment.

Long term patterns of seed softening and seedling establishment from single seed crops of subterranean clover

1984 ◽  
Vol 24 (125) ◽  
pp. 200 ◽  
Author(s):  
GB Taylor ◽  
RC Rossiter ◽  
MJ Palmer
Keyword(s):  
Seedling Establishment ◽  
Subterranean Clover ◽  
Late Summer ◽  
Trifolium Subterraneum ◽  
The Other ◽  
Hard Seed ◽  
Single Seed ◽  
One Year ◽  
Seed Crops

Single seed crops of eight varieties of subterranean clover (Trifolium subterraneum) were grown in swards in four successive years in a medium rainfall environment at Bakers Hill, Western Australia. Measurements were made of seed production, the progress of seed softening within the first two summers, and residual hard seed and seedling numbers after the break of season for up to six successive regeneration years. Patterns of seed softening were also measured in a laboratory oven with a diurnal temperature fluctuation of 60/15�C. Approximately half the seeds of all varieties softened over the first summer and generally well over half the residual seeds softened during the second summer. Up to 18% of seeds of the hardest seeded variety, Northam, and 11% of Geraldton seeds persisted to the end of the third summer as hard seeds. Seed softening patterns showed a significant variety x regeneration year interaction due mainly to a slower rate of softening of Northam seeds relative to the other varieties after the first summer. In six of the varieties, seeds generally softened more slowly in the laboratory than in the field but in the case of the other two varieties this trend was reversed. Nevertheless, ranking of varieties for rate of seed softening was similar in field and laboratory. Seedling establishment ranged from 28 to 100% of soft seeds, depending on the incidence of late summer and autumn rains. It appeared that all varieties in the study would regenerate satisfactorily at densities of more than 15 plants/dm2 after at least one year in which little or no seed is set. Slower rates of softening would probably be desirable in drier regions or in rotation systems involving cropping.

scholarly journals Inkjet-printed Plasma Sheet: From Manufacturing to Application

2021 ◽  
Author(s):  
Jinwoo Kim ◽  
Sanghoo Park ◽  
Wonho Choe
Keyword(s):  
Inkjet Printing ◽  
Plasma Source ◽  
Continuous Operation ◽  
High Dimensional ◽  
Plasma Reactors ◽  
Health Crisis ◽  
New Normal ◽  
Plasma Sources ◽  
Term Operation

Abstract The global health crisis caused by the recent pandemic has led to increasing social demand for ‘new normal’ sanitizing and disinfecting facilities to fit our ‘new normal’ lives. Here, we introduce an inkjet-printed, thin-film plasma source applicable to dry disinfection processes. In contrast to conventional plasma reactors, the merits of plasma produced on a film include disposability, cost-effectiveness, and applicability to high-dimensional objects such as the human body. The developed flexible plasma film can be applied to a wide variety of shapes via origami — remaining plasma stable even when bent. However, electrode dissipation has been a practical issue in the long-term operation of inkjet-printed plasma sources, which is troublesome from application perspectives. We focus on making the inkjet-printed electrode more plasma stress-resistant, thereby increasing its lifespan from a few minutes to two hours of continuous operation with optimal inkjet printing and passivation, thus increasing the practicality of the source. Considering the fact that ozone and nitrogen oxides are selectively produced by plasma, we implement a disposable pouch-type plasma source and examine its usefulness in extending the shelf life of food.

scholarly journals Long term crop rotation effect on soybean yield explained by soil- and root-associated microbiome and soil health indicators

2020 ◽  
Author(s):  
Achal Neupane ◽  
Izzet Bulbul ◽  
Ziyi Wang ◽  
R. Michael Lehman ◽  
Emerson Nafziger ◽  
...  
Keyword(s):  
Crop Rotation ◽  
Crop Yield ◽  
Soil Health ◽  
Health Indicators ◽  
The Other ◽  
Microbial Populations ◽  
Soybean Yield ◽  
Soil Microbial ◽  
One Year

Abstract Background Crop rotation is an important management tactic that farmers use to manage crop production and reduce pests and diseases. Long-term crop rotations may select groups of microbes that form beneficial or pathogenic associations with the following crops, which could explain observed crop yield differences with different crop sequences. To test this hypothesis, we used two locations each with three long-term (14 year), replicated, crop rotation treatments: continuous corn ( Zea mays ) (CCC), corn/corn/soybean (SCC), and corn/soybean (CSC); both CSC and SCC had each phase present each year. In Year 15, we grew soybean ( Glycine max ) in each plot, so that soybean replaced corn in CCC and in the CSC phase where soybean grew in Year 14, and took data from soybeans following CCC (14 years of corn), SCC (two years of corn), CSC (one year of corn), and SCS (one year of soybean). Soybean yield and soil health indicators were measured, along with the bulk soil microbiome and soybean root-associated microbiome.Results Soybean yields were significantly higher following CCC than in the other three treatments at both locations. Soil protein as a soil health indicator was also higher following CCC than in the other treatments. Differential abundances of bacterial and fungal taxa were related to yield differences in a site-specific manner. Uncultured bacterial taxa in family JG30-KF-AS9 was enriched in the high-yielding CCC plots in Monmouth, whereas Microvirga , Rhodomicrobium , and Micromonosporaceae were enriched in the low-yielding SCS plots. Members of the fungal phylum Ascomycota were informative in explaining yield differences among treatments mostly as pathogens, but Tumularia , Pyrenochaetopsis and Schizothecium were enriched in the CCC plots, suggesting a role as either corn pathogens or beneficial fungal taxa for soybean. Multivariate analysis associated soil health indicators with the rotation regimes and some of the differentially abundant microbial taxa.Conclusions Our finding of associations between soil health indicators related to soil microbial populations and soybean yield following different cropping sequences has wide-ranging implications, opening the possibility of both monitoring and manipulating soil microbial populations as a way to improve crop yield potential.

LONG-TERM OPERATION OF DOSIMETRY FACILITY «PILLE» ONBOARD THE ISS

2021 ◽  
Vol 55 (4) ◽  
pp. 86-90
Author(s):  
V.G. Mitrikas ◽  
◽  
E.G. Khorosheva ◽  
Keyword(s):  
Dose Rate ◽  
Absorbed Dose ◽  
Radiation Monitoring ◽  
The Other ◽  
Radiation Doses ◽  
Absorbed Dose Rate ◽  
Term Operation ◽  
Low Radiation Doses

Malfunctioning of the reader is likely to be the reason for low radiation doses measured by the Pille dosimeters over the more than 20 years of ISS. Rectified measurements of the average daily absorbed dose rate agreed satisfactorily with readings of the other onboard tools of radiation monitoring.

Choosing a Suitable Ultramicrotome, Associated Equipment and the Proper Laboratory Environment for Operation of the System

1998 ◽  
Vol 4 (S2) ◽  
pp. 898-899
Author(s):  
John J. Bozzola
Keyword(s):  
The Other ◽  
Clear Indication ◽  
Short Term ◽  
Laboratory Environment ◽  
Other Hand ◽  
Future Requirement ◽  
One Year ◽  
Selection Of

The selection of an ultramicrotome should always begin with an evaluation of the immediate as well as the long-term needs of the laboratory. If present projects require ultramicrotomy on a regular basis (e.g., more than 5-10 specimens per week) and if this demand will probably continue for more than one year, the acquisition of an ultramicrotome is justified. An intensive, short-term project or an occasional need with no clear indication of a future requirement for ultramicrotomy could best be accommodated by either leasing an ultramicrotome or contracting the work to an individual or corporation. On the other hand, several laboratories with modest needs may wish to pool resources and purchase a shared instrument capable of fulfilling the requirements of each lab.Since new ultramicrotomes cost $20k and up, one may be compelled to acquire a used instrument. Depending upon the age and condition, a used ultramicrotome may be purchased at a cost of $2-15k.

Population fluctuations in spruce grouse: what determines their numbers in spring?

1987 ◽  
Vol 65 (10) ◽  
pp. 2430-2435 ◽  
Author(s):  
D. A. Boag ◽  
M. A. Schroeder
Keyword(s):  
Population Size ◽  
Breeding Success ◽  
The Other ◽  
Population Fluctuations ◽  
Spacing Behaviour ◽  
Term Change ◽  
The Status ◽  
The Mean ◽  
One Year

The number of spruce grouse (Falcipennis (Canachites) franklinii) present in the spring population on a 247-ha block of pine-dominated habitat in southwestern Alberta was counted annually over a 21-year period. During the first 5 years of this study, the population increased steadily from 7.3 to 16.6 grouse/100 ha. Subsequently, for a period of 11 years, numbers were relatively stable at higher densities (19.0–29.1 grouse/100 ha). During the last 5-year period, the population declined to levels lower than at the onset of the study (16.6–4.9 grouse/100 ha). Year to year fluctuations in the size of this population were considered in the light of two hypotheses put forward to explain such fluctuations (spacing behaviour and breeding success). We concluded that both hypotheses were needed to explain our observations. During those years when spring population size fell below the mean number of grouse recorded over the 21-year period (17.8/100 ha), there was some evidence that breeding success in one year may have influenced population size the following spring but we found no evidence that spacing behaviour was important in limiting numbers under these conditions. On the other hand, when the size of the spring population was greater than the mean there was no evidence that breeding success influenced changes in population size the following spring, but there was evidence that spacing behaviour was limiting recruitment. The long-term change in population size appeared to be tied to the status of the fire sere inhabited: maturation of the forest (principally an increase in the height) was accompanied by a decline in population size.

Sign in / Sign up

Export Citation Format

Share Document