Multivariate statistical analysis of a high rate biofilm process treating kraft mill bleach plant effluent

2007 ◽  
Vol 55 (6) ◽  
pp. 47-55 ◽  
Author(s):  
C. Goode ◽  
J. LeRoy ◽  
D.G. Allen
Keyword(s):  
Pulp Mill ◽  
Principal Component ◽  
Ph Control ◽  
Biofilm Reactor ◽  
High Rate ◽  
Average Error ◽  
Significant Variable ◽  
Reactor Performance ◽  
Multivariate Statistical ◽  
Temporal Correlations

This study reports on a multivariate analysis of the moving bed biofilm reactor (MBBR) wastewater treatment system at a Canadian pulp mill. The modelling approach involved a data overview by principal component analysis (PCA) followed by partial least squares (PLS) modelling with the objective of explaining and predicting changes in the BOD output of the reactor. Over two years of data with 87 process measurements were used to build the models. Variables were collected from the MBBR control scheme as well as upstream in the bleach plant and in digestion. To account for process dynamics, a variable lagging approach was used for variables with significant temporal correlations. It was found that wood type pulped at the mill was a significant variable governing reactor performance. Other important variables included flow parameters, faults in the temperature or pH control of the reactor, and some potential indirect indicators of biomass activity (residual nitrogen and pH out). The most predictive model was found to have an RMSEP value of 606 kgBOD/d, representing a 14.5% average error. This was a good fit, given the measurement error of the BOD test. Overall, the statistical approach was effective in describing and predicting MBBR treatment performance.

Statistical Analsysis to Evaluate Heavy Metal Pollution in the Air Obatained by Moss Technique in Hanoi and its Surrounding Region

2019 ◽  
Vol 29 (3SI) ◽  
pp. 411
Author(s):  
N. H. Quyet ◽  
Le Hong Khiem ◽  
V. D. Quan ◽  
T. T. T. My ◽  
M. V. Frontasieva ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Statistical Analysis ◽  
Metal Pollution ◽  
Heavy Metal Pollution ◽  
Principal Component ◽  
Multivariate Statistical ◽  
Five Factors ◽  
Heavy Metal Elements ◽  
Surrounding Areas ◽  
Potential Pollution

The aim of this paper was the application of statistical analysis including principal component analysis to evaluate heavy metal pollution obtained by moss technique in the air of Ha Noi and its surrounding areas and to evaluate potential pollution sources. The concentrations of 33 heavy metal elements in 27 samples of Barbula Indica moss in the investigated region collected in December of 2016 in the investigated area have been examined using multivariate statistical analysis. Five factors explaining 80% of the total variance were identified and their potential sources have been discussed.

It is better an approximate answer to the right question than the exact answer to the wrong question : the case of the psychometric analysis of the ASQ:SE

2020 ◽  
Author(s):  
Luis Anunciacao ◽  
janet squires ◽  
J. Landeira-Fernandez
Keyword(s):  
Internal Structure ◽  
Statistical Methods ◽  
Principal Component ◽  
Psychological Theory ◽  
Published Data ◽  
Multivariate Statistical ◽  
Exact Answer ◽  
Wide Range ◽  
Ages And Stages Questionnaire ◽  
The Right

One of the main activities in psychometrics is to analyze the internal structure of a test. Multivariate statistical methods, including Exploratory Factor analysis (EFA) and Principal Component Analysis (PCA) are frequently used to do this, but the growth of Network Analysis (NA) places this method as a promising candidate. The results obtained by these methods are of valuable interest, as they not only produce evidence to explore if the test is measuring its intended construct, but also to deal with the substantive theory that motivated the test development. However, these different statistical methods come up with different answers, providing the basis for different analytical and theoretical strategies when one needs to choose a solution. In this study, we took advantage of a large volume of published data (n = 22,331) obtained by the Ages and Stages Questionnaire Social-Emotional (ASQ:SE), and formed a subset of 500 children to present and discuss alternative psychometric solutions to its internal structure, and also to its subjacent theory. The analyses were based on a polychoric matrix, the number of factors to retain followed several well-known rules of thumb, and a wide range of exploratory methods was fitted to the data, including EFA, PCA, and NA. The statistical outcomes were divergent, varying from 1 to 6 domains, allowing a flexible interpretation of the results. We argue that the use of statistical methods in the absence of a well-grounded psychological theory has limited applications, despite its appeal. All data and codes are available at https://osf.io/z6gwv/.

The anaerobic treatment of a ligno-cellulosic substrate offering little natural pH buffering capacity

1998 ◽  
Vol 38 (4-5) ◽  
pp. 29-35 ◽  
Author(s):  
C. J. Banks ◽  
P. N. Humphreys
Keyword(s):  
Ph Control ◽  
Anaerobic Treatment ◽  
Buffering Capacity ◽  
Single Stage ◽  
Stable Operation ◽  
Reactor Performance ◽  
Two Stage ◽  
Ph Buffering ◽  
Stage System ◽  
The Stability

The stability and operational performance of single stage digestion with and without liquor recycle and two stage digestion were assessed using a mixture of paper and wood as the digestion substrate. Attempts to maintain stable digestion in both single stage reactors were unsuccessful due to the inherently low natural buffering capacity exhibited; this resulted in a rapid souring of the reactor due to unbuffered volatile fatty acid (VFA) accumulation. The use of lime to control pH was unsatisfactory due to interference with the carbonate/bicarbonate equilibrium resulting in wide oscillations in the control parameter. The two stage system overcame the pH stability problems allowing stable operation for a period of 200 days without any requirement for pH control; this was attributed to the rapid flushing of VFA from the first stage reactor into the second stage, where efficient conversion to methane was established. Reactor performance was judged to be satisfactory with the breakdown of 53% of influent volatile solids. It was concluded that the reactor configuration of the two stage system offers the potential for the treatment of cellulosic wastes with a sub-optimal carbon to nitrogen ratio for conventional digestion.

scholarly journals Characterization of the Volatile Profile of Cultivated and Wild-Type Italian Celery (Apium graveolens L.) Varieties by HS-SPME/GC-MS

2021 ◽  
Vol 11 (13) ◽  
pp. 5855
Author(s):  
Samantha Reale ◽  
Valter Di Cecco ◽  
Francesca Di Donato ◽  
Luciano Di Martino ◽  
Aurelio Manzi ◽  
...  
Keyword(s):  
Solid Phase ◽  
Principal Component ◽  
Apium Graveolens ◽  
Gas Chromatography Mass Spectrometry ◽  
Bioactive Metabolites ◽  
Chemical Components ◽  
Volatile Profile ◽  
Wild Type ◽  
Multivariate Statistical ◽  
Clear Differentiation

Celery (Apium graveolens L.) is a vegetable belonging to the Apiaceae family that is widely used for its distinct flavor and contains a variety of bioactive metabolites with healthy properties. Some celery ecotypes cultivated in specific territories of Italy have recently attracted the attention of consumers and scientists because of their peculiar sensorial and nutritional properties. In this work, the volatile profiles of white celery “Sedano Bianco di Sperlonga” Protected Geographical Indication (PGI) ecotype, black celery “Sedano Nero di Torricella Peligna” and wild-type celery were investigated using head-space solid-phase microextraction combined with gas-chromatography/mass spectrometry (HS-SPME/GC-MS) and compared to that of the common ribbed celery. Exploratory multivariate statistical analyses were conducted using principal component analysis (PCA) on HS-SPME/GC-MS patterns, separately collected from celery leaves and petioles, to assess similarity/dissimilarity in the flavor composition of the investigated varieties. PCA revealed a clear differentiation of wild-type celery from the cultivated varieties. Among the cultivated varieties, black celery “Sedano Nero di Torricella Peligna” exhibited a significantly different composition in volatile profile in both leaves and petioles compared to the white celery and the prevalent commercial variety. The chemical components of aroma, potentially useful for the classification of celery according to the variety/origin, were identified.

scholarly journals Chemical Fingerprinting of Cryptic Species and Genetic Lineages of Aneura pinguis (L.) Dumort. (Marchantiophyta, Metzgeriidae)

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1180
Author(s):  
Rafał Wawrzyniak ◽  
Wiesław Wasiak ◽  
Beata Jasiewicz ◽  
Alina Bączkiewicz ◽  
Katarzyna Buczkowska
Keyword(s):  
Cluster Analysis ◽  
Cryptic Species ◽  
Plant Material ◽  
Chemical Constituents ◽  
Principal Component ◽  
Molecular Data ◽  
Rapid Identification ◽  
Multivariate Statistical ◽  
Genetic Lineages ◽  
Marker Compounds

Aneura pinguis (L.) Dumort. is a representative of the simple thalloid liverworts, one of the three main types of liverwort gametophytes. According to classical taxonomy, A. pinguis represents one morphologically variable species; however, genetic data reveal that this species is a complex consisting of 10 cryptic species (named by letters from A to J), of which four are further subdivided into two or three evolutionary lineages. The objective of this work was to develop an efficient method for the characterisation of plant material using marker compounds. The volatile chemical constituents of cryptic species within the liverwort A. pinguis were analysed by GC-MS. The compounds were isolated from plant material using the HS-SPME technique. Of the 66 compounds examined, 40 were identified. Of these 40 compounds, nine were selected for use as marker compounds of individual cryptic species of A. pinguis. A guide was then developed that clarified how these markers could be used for the rapid identification of the genetic lineages of A. pinguis. Multivariate statistical analyses (principal component and cluster analysis) revealed that the chemical compounds in A. pinguis made it possible to distinguish individual cryptic species (including genetic lineages), with the exception of cryptic species G and H. The classification of samples based on the volatile compounds by cluster analysis reflected phylogenetic relationships between cryptic species and genetic lineages of A. pinguis revealed based on molecular data.

scholarly journals Multivariate Analysis as a Tool for Quantification of Conformational Transitions in DNA Thin Films

2021 ◽  
Vol 11 (13) ◽  
pp. 5895
Author(s):  
Kristina Serec ◽  
Sanja Dolanski Babić
Keyword(s):  
Thin Films ◽  
Learning Algorithm ◽  
Principal Component Regression ◽  
Principal Component ◽  
Conformational Transitions ◽  
Cancer Diagnostics ◽  
Dna Conformation ◽  
Support Vector ◽  
Multivariate Statistical ◽  
The Impact

The double-stranded B-form and A-form have long been considered the two most important native forms of DNA, each with its own distinct biological roles and hence the focus of many areas of study, from cellular functions to cancer diagnostics and drug treatment. Due to the heterogeneity and sensitivity of the secondary structure of DNA, there is a need for tools capable of a rapid and reliable quantification of DNA conformation in diverse environments. In this work, the second paper in the series that addresses conformational transitions in DNA thin films utilizing FTIR spectroscopy, we exploit popular chemometric methods: the principal component analysis (PCA), support vector machine (SVM) learning algorithm, and principal component regression (PCR), in order to quantify and categorize DNA conformation in thin films of different hydrated states. By complementing FTIR technique with multivariate statistical methods, we demonstrate the ability of our sample preparation and automated spectral analysis protocol to rapidly and efficiently determine conformation in DNA thin films based on the vibrational signatures in the 1800–935 cm−1 range. Furthermore, we assess the impact of small hydration-related changes in FTIR spectra on automated DNA conformation detection and how to avoid discrepancies by careful sampling.

scholarly journals STATISTICAL MULTIVARIATE ANALYSIS APPLIED TO ENVIRONMENTAL CHARACTERIZATION OF SOIL IN SEMIARID REGION1

2019 ◽  
Vol 32 (1) ◽  
pp. 200-210
Author(s):  
Antônio Italcy de Oliveira Júnior ◽  
Luiz Alberto Ribeiro Mendonça ◽  
Sávio de Brito Fontenele ◽  
Adriana Oliveira Araújo ◽  
Maria Gorethe de Sousa Lima Brito
Keyword(s):  
Organic Matter Content ◽  
Principal Component ◽  
Matter Content ◽  
Multivariate Statistical ◽  
Statistical Tool ◽  
Environmental Characterization ◽  
Hierarchical Grouping ◽  
Two Factors ◽  
Total Data

ABSTRACT Soil is a dynamic and complex system that requires a considerable number of samples for analysis and research purposes. Using multivariate statistical methods, favorable conditions can be created by analyzing the samples, i.e., structural reduction and simplification of the data. The objective of this study was to use multivariate statistical analysis, including factorial analysis (FA) and hierarchical groupings, for the environmental characterization of soils in semiarid regions, considering anthropic (land use and occupation) and topographic aspects (altitude, moisture, granulometry, PR, and organic-matter content). As a case study, the São José Hydrographic Microbasin, which is located in the Cariri region of Ceará, was considered. An FA was performed using the principal component method, with normalized varimax rotation. In hierarchical grouping analysis, the “farthest neighbor” method was used as the hierarchical criterion for grouping, with the measure of dissimilarity given by the “square Euclidean distance.” The FA indicated that two factors explain 75.76% of the total data variance. In the analysis of hierarchical groupings, the samples were agglomerated in three groups with similar characteristics: one with samples collected in an area of the preserved forest and two with samples collected in areas with more anthropized soils. This indicates that the statistical tool used showed sensitivity to distinguish the most conserved soils and soils with different levels of anthropization.

High-rate anaerobic treatment of Fischer–Tropsch wastewater in a packed-bed biofilm reactor

2010 ◽  
Vol 44 (9) ◽  
pp. 2745-2752 ◽  
Author(s):  
Mauro Majone ◽  
Federico Aulenta ◽  
Davide Dionisi ◽  
Ezio N. D'Addario ◽  
Rosa Sbardellati ◽  
...  
Keyword(s):  
Packed Bed ◽  
Anaerobic Treatment ◽  
Biofilm Reactor ◽  
High Rate ◽  
Fischer Tropsch

scholarly journals Biofilm carrier migration model describes reactor performance

2017 ◽  
Vol 75 (12) ◽  
pp. 2818-2828 ◽  
Author(s):  
Joshua P. Boltz ◽  
Bruce R. Johnson ◽  
Imre Takács ◽  
Glen T. Daigger ◽  
Eberhard Morgenroth ◽  
...  
Keyword(s):  
Plug Flow ◽  
Biofilm Reactor ◽  
Bulk Liquid ◽  
Reactor Performance ◽  
Reactor Model ◽  
Operational Conditions ◽  
Limit Model ◽  
Biofilm Model ◽  
Reactor Models ◽  
The Impact

The accuracy of a biofilm reactor model depends on the extent to which physical system conditions (particularly bulk-liquid hydrodynamics and their influence on biofilm dynamics) deviate from the ideal conditions upon which the model is based. It follows that an improved capacity to model a biofilm reactor does not necessarily rely on an improved biofilm model, but does rely on an improved mathematical description of the biofilm reactor and its components. Existing biofilm reactor models typically include a one-dimensional biofilm model, a process (biokinetic and stoichiometric) model, and a continuous flow stirred tank reactor (CFSTR) mass balance that [when organizing CFSTRs in series] creates a pseudo two-dimensional (2-D) model of bulk-liquid hydrodynamics approaching plug flow. In such a biofilm reactor model, the user-defined biofilm area is specified for each CFSTR; thereby, Xcarrier does not exit the boundaries of the CFSTR to which they are assigned or exchange boundaries with other CFSTRs in the series. The error introduced by this pseudo 2-D biofilm reactor modeling approach may adversely affect model results and limit model-user capacity to accurately calibrate a model. This paper presents a new sub-model that describes the migration of Xcarrier and associated biofilms, and evaluates the impact that Xcarrier migration and axial dispersion has on simulated system performance. Relevance of the new biofilm reactor model to engineering situations is discussed by applying it to known biofilm reactor types and operational conditions.

Sign in / Sign up

Export Citation Format

Share Document