Biosensor-based control of nitrification inhibitor in municipal wastewater treatment plants

2006 ◽  
Vol 53 (4-5) ◽  
pp. 357-366 ◽  
Author(s):  
Y. Okayasu ◽  
H. Tanaka ◽  
T. Inui ◽  
Y. Tanaka
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Nitrification Inhibitor ◽  
Nitrifying Bacteria ◽  
Activated Sludge Process ◽  
Municipal Wastewater Treatment ◽  
Municipal Wastewater Treatment Plants ◽  
The Impact

The effect of potassium cyanide (KCN) on nitrification processes in municipal wastewater treatment plants was studied by batch nitrification tests, which indicated that nitrification processes tend to be inhibited at a lower KCN concentration than the present discharge standard to sewerage. The experiment of the biosensor using nitrifying bacteria was also conducted for continuous monitoring of nitrification inhibitor in influent wastewater, and demonstrated that the biosensor can detect KCN at as low as EC10 of the abovementioned batch nitrification test. Moreover, to determine the effectiveness of application of the biosensor to avoid the impact of KCN due to an accidental spillage in a sewerage system, KCN was intentionally injected into the experimental models of activated sludge process equipped both with and without the biosensor. The model with the biosensor that could detect KCN could divert the wastewater including KCN to a refuge tank, which resulted in the avoidance of upset of the activated sludge process. On the other hand, the model without the biosensor was upset in the nitrification process due to KCN. Such differences demonstrate the effectiveness of the biosensor applied to countermeasures of an accidental spillage of toxic chemicals to avoid upset of nitrification in municipal wastewater treatment plants.

PARAMETERS FOR DYNAMIC SIMULATION OF W ASTEW ATER TREATMENT PLANTS WITH HIGH-RATE AND LOW-RATE ACTIVATED SLUDGE TANKS

1994 ◽  
Vol 30 (4) ◽  
pp. 211-214 ◽  
Author(s):  
E. Brands ◽  
M. Liebeskind ◽  
M. Dohmann
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Dynamic Simulation ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
High Rate ◽  
Yield Coefficient ◽  
Municipal Wastewater Treatment ◽  
Municipal Wastewater Treatment Plants ◽  
Low Rate

This study shows a comparison of important parameters for dynamic simulation concerning the highrate and low-rate activated sludge tanks of several municipal wastewater treatment plants. The parameters for the dynamic simulation of the single-stage process are quite well known, but parameters for the high-ratellow-rate activated sludge process are still missi ng, although a considerable number of wastewater treatment plants are designed and operated that way. At present any attempt to simulate their operation is restricted to the second stage due to missing data concerning growth rate, decay rate, yield coefficient and others.

Characterization of wastewater and activated sludge from European municipal wastewater treatment plants using the NUR test

1998 ◽  
Vol 38 (1) ◽  
pp. 303-310 ◽  
Author(s):  
V. Naidoo ◽  
V. Urbain ◽  
C. A. Buckley
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Municipal Wastewater Treatment ◽  
Batch Tests ◽  
Denitrification Kinetics ◽  
Municipal Wastewater Treatment Plants

Denitrification kinetics and wastewater characterization of eight different plants in Europe are discussed. Denitrification batch tests revealed three distinct rates except in the cases of Plaisir, Rostock and Orense where 4 rates were observed. The latter three plants revealed atypical rapid initial rates which were between 7 and 21 mgN/gVSS.h. All denitrification kinetics under non-limiting carbon conditions revealed fast first rates which ranged between 3.0 and 7.3 mgN/gVSS.h. Acetate was used to simulate denitrification kinetics with readily biodegradable COD present. Two subsequent rates were observed. Rates 2 and 3 ranged between 2 and 3 mgN/gVSS.h, and 1 and 2 mgN/gVSS.h, respectively. The RBCOD fraction varied between 10 and 19%, except for one of the plants where the value determined was 7%.

scholarly journals Casimicrobium huifangae gen. nov., sp. nov., a Ubiquitous “Most-Wanted” Core Bacterial Taxon from Municipal Wastewater Treatment Plants

2019 ◽  
Vol 86 (4) ◽  
Author(s):  
Yang Song ◽  
Cheng-Ying Jiang ◽  
Zong-Lin Liang ◽  
Bao-Jun Wang ◽  
Yong Jiang ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Carbon Sources ◽  
Short Chain Fatty Acids ◽  
Municipal Wastewater Treatment ◽  
Content Type ◽  
Bacterial Taxon ◽  
Municipal Wastewater Treatment Plants

ABSTRACT Microorganisms in wastewater treatment plants (WWTPs) play a key role in the removal of pollutants from municipal and industrial wastewaters. A recent study estimated that activated sludge from global municipal WWTPs harbors 1 × 109 to 2 × 109 microbial species, the majority of which have not yet been cultivated, and 28 core taxa were identified as “most-wanted” ones (L. Wu, D. Ning, B. Zhang, Y. Li, et al., Nat Microbiol 4:1183–1195, 2019, https://doi.org/10.1038/s41564-019-0426-5). Cultivation and characterization of the “most-wanted” core bacteria are critical to understand their genetic, physiological, phylogenetic, and ecological traits, as well as to improve the performance of WWTPs. In this study, we isolated a bacterial strain, designated SJ-1, that represents a novel cluster within Betaproteobacteria and corresponds to OTU_16 within the 28 core taxa in the “most-wanted” list. Strain SJ-1 was identified and nominated as Casimicrobium huifangae gen. nov., sp. nov., of a novel family, Casimicrobiaceae. C. huifangae is ubiquitously distributed and is metabolically versatile. In addition to mineralizing various carbon sources (including carbohydrates, aromatic compounds, and short-chain fatty acids), C. huifangae is capable of nitrate reduction and phosphorus accumulation. The population of C. huifangae accounted for more than 1% of the bacterial population of the activated sludge microbiome from the Qinghe WWTP, which showed seasonal dynamic changes. Cooccurrence analysis suggested that C. huifangae was an important module hub in the bacterial network of Qinghe WWTP. IMPORTANCE The activated sludge process is the most widely applied biotechnology and is one of the best ecosystems to address microbial ecological principles. Yet, the cultivation of core bacteria and the exploration of their physiology and ecology are limited. In this study, the core and novel bacterial taxon C. huifangae was cultivated and characterized. This study revealed that C. huifangae functioned as an important module hub in the activated sludge microbiome, and it potentially plays an important role in municipal wastewater treatment plants.

Implications and remediations of DMAEA-Q type polymer hydrolysis in wastewater treatment plants

2010 ◽  
Vol 61 (5) ◽  
pp. 1349-1354
Author(s):  
H. Saveyn ◽  
D. Curvers ◽  
J. Pelicaen ◽  
J. Cauwenberghs ◽  
C. Thoeye ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Dry Matter ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Consumption Pattern ◽  
Municipal Wastewater Treatment ◽  
Polymer Hydrolysis ◽  
Charge Loss ◽  
Municipal Wastewater Treatment Plants ◽  
The Impact

The present paper outlines the impact of hydrolysis occurring in DMAEA-Q type polymers in the dewatering facilities of municipal wastewater treatment plants. Laboratory studies of polymer hydrolysis kinetics were combined with full-scale dewatering experiments to investigate the influence of polymer charge loss on polymer consumption and cake dry matter yields. The results indicate that prolonged polymer storage leads to important charge loss effects, resulting in increased dosage requirements for satisfactory dewatering performance. Fortunately, charge loss effects due to hydrolysis upon polymer storage could be minimized by acidifying the polymer batches. Furthermore, cake dry matter contents obtained from dewatering tests with freshly prepared polymer batches suggested that acidification of the polymer batch also had a beneficial effect on the conditioning efficiency of the polymer solution. The results from this study thus stress the influence of pH on the shelf life and efficiency of polymer solutions in wastewater treatment plants. As a consequence, polymer preparation and storage procedures should be adapted to the polymer consumption pattern and pH of the medium used for polymer batch production.

scholarly journals Opportunities for microbial electrochemistry in municipal wastewater treatment – an overview

2014 ◽  
Vol 69 (7) ◽  
pp. 1359-1372 ◽  
Author(s):  
Oskar Modin ◽  
David J. I. Gustavsson
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Energy Content ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Treatment Processes ◽  
Municipal Wastewater Treatment Plants ◽  
And Control ◽  
The Impact

Microbial bioelectrochemical systems (BESs) utilize living microorganisms to drive oxidation and reduction reactions at solid electrodes. BESs could potentially be used at municipal wastewater treatment plants (WWTPs) to recover the energy content of organic matter, to produce chemicals useful at the site, or to monitor and control biological treatment processes. In this paper, we review bioelectrochemical technologies that could be applied for municipal wastewater treatment. Sjölunda WWTP in Malmö, Sweden, is used as an example to illustrate how the different technologies potentially could be integrated into an existing treatment plant and the impact they could have on the plant's utilization of energy and chemicals.

Sign in / Sign up

Export Citation Format

Share Document