Carbonate addition - an effective remedy against poor activated sludge settling properties and alkalinity conditions in small wastewater treatment plants

2004 ◽  
Vol 48 (11-12) ◽  
pp. 411-417 ◽  
Author(s):  
B. Wett ◽  
A. Eladawy ◽  
W. Becker
Keyword(s):  
Wastewater Treatment Plants ◽  
Ph Value ◽  
Solid Phase ◽  
Monitoring Program ◽  
Volume Index ◽  
Nitrification Rate ◽  
Marble Powder ◽  
Effective Remedy ◽  
Sludge Settling ◽  
The Impact

The impact of marble powder on the performance of small seasonal treatment plants dealing with high ammonia concentrated wastewater has been investigated. The carbonate has been added to one of two parallel lab-scale SBR-systems as an alkalinity depot and a bio-carrier. The focus of the monitoring program was put on the measurement of carbon fractions in the liquid and the solid phase and on the alkalinity conditions. Monitoring results show a significant correlation between carbonate dosage (and corresponding inorganic carbon concentration and pH-value) and sludge volume index and nitrification rate.

Improvement of the intersection method for the quantification of filamentous organisms: basis and practice for bulking and foaming bioindication purposes

2016 ◽  
Vol 74 (6) ◽  
pp. 1274-1282 ◽  
Author(s):  
Humbert Salvadó
Keyword(s):  
Wastewater Treatment Plants ◽  
Two Dimensions ◽  
Volume Index ◽  
Filament Length ◽  
Improved Method ◽  
Sludge Volume Index ◽  
Filamentous Microorganisms ◽  
Different Types ◽  
Intersection Method ◽  
The Impact

Bulking and foaming phenomena in activated sludge wastewater treatment plants are in most cases related to the abundance of filamentous microorganisms. Quantifying these microorganisms should be a preliminary stage in their control. In this paper, the simplicity of quantifying them based on the intersection method is demonstrated, by redescribing the theory and applying a new improved protocol; new data of interest are also provided. The improved method allows us to use it with stained smears, including epifluorescence techniques. The error that could be made, when considering the distribution of filamentous bacteria in fresh microscope preparations in two dimensions rather than three is negligible. The effect of the different types of filamentous microorganisms on the settleability was also studied. The effect of the total extended filament length on the sludge settleability was shown to depend on the type of filamentous organism and how it aggregates. When these groups of filamentous organisms are found in small aggregations and there is an increase in the number of filamentous organisms, the sludge volume index (SVI) increases proportionally to the filament length. However, when aggregation increases, the impact on the SVI is significantly lower.

scholarly journals Effect of Aluminium Salt Dosing on Activated Sludge Settleability Indicators: A New Settleability Model Development

Water ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 179 ◽  
Author(s):  
Peter Ojo ◽  
Augustine Ifelebuegu
Keyword(s):  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Model Development ◽  
Chemical Precipitation ◽  
Significant Rise ◽  
Volume Index ◽  
Engineering Practice ◽  
Proposed Model ◽  
The Impact ◽  
Sludge Settleability

There has been a significant rise in the use of aluminium salts (Al3+) for the chemical precipitation of phosphates in wastewater treatment plants due to growing stricter regulatory requirements for wastewater effluent release to the environment. The modelling of the settleability of the resultant Al3+ sludge in present engineering practice for design and optimisation are still based on conventional sludge settleability models. This paper describes a novel activated sludge settleability model which is designed to analyse the effects of Al3+ dosing on activated sludge settleability indicators, zone settling velocity (ZSV), and stirred specific volume index (SSVI). The impact of Al3+ dosing concentrations on ZSV and SSVI of full scale activated sludge plant were analysed in the laboratory over a three years’ period and the exponential form of the Vesilind equation was optimised and validated to include alum chemical dosing parameters. The proposed model equation was found to effectively describe the settleability of Al3+ dosed sludge for dosing concentrations range of 0 to 100 mg/L.

Development of Strategies for Glycopeptide Synthesis: An Overview on the Glycosidic Linkage

2020 ◽  
Vol 24 (21) ◽  
pp. 2475-2497
Author(s):  
Andrea Verónica Rodríguez-Mayor ◽  
German Jesid Peralta-Camacho ◽  
Karen Johanna Cárdenas-Martínez ◽  
Javier Eduardo García-Castañeda
Keyword(s):  
Chemical Synthesis ◽  
Solid Phase ◽  
Building Blocks ◽  
Heterogeneous Environments ◽  
Phase Synthesis ◽  
Low Concentrations ◽  
Biological Sources ◽  
Synthetic Routes ◽  
The Impact ◽  
Potential Use

Glycoproteins and glycopeptides are an interesting focus of research, because of their potential use as therapeutic agents, since they are related to carbohydrate-carbohydrate, carbohydrate-protein, and carbohydrate-lipid interactions, which are commonly involved in biological processes. It has been established that natural glycoconjugates could be an important source of templates for the design and development of molecules with therapeutic applications. However, isolating large quantities of glycoconjugates from biological sources with the required purity is extremely complex, because these molecules are found in heterogeneous environments and in very low concentrations. As an alternative to solving this problem, the chemical synthesis of glycoconjugates has been developed. In this context, several methods for the synthesis of glycopeptides in solution and/or solid-phase have been reported. In most of these methods, glycosylated amino acid derivatives are used as building blocks for both solution and solid-phase synthesis. The synthetic viability of glycoconjugates is a critical parameter for allowing their use as drugs to mitigate the impact of microbial resistance and/or cancer. However, the chemical synthesis of glycoconjugates is a challenge, because these molecules possess multiple reaction sites and have a very specific stereochemistry. Therefore, it is necessary to design and implement synthetic routes, which may involve various protection schemes but can be stereoselective, environmentally friendly, and high-yielding. This review focuses on glycopeptide synthesis by recapitulating the progress made over the last 15 years.

Introduction to geomicrobiology

2018 ◽  
Author(s):  
David L. Kirchman
Keyword(s):  
Fossil Fuels ◽  
Solid Phase ◽  
Direct Reduction ◽  
Iron Oxidation ◽  
Mineral Dissolution ◽  
Precipitation Process ◽  
Soluble Ions ◽  
Chemolithoautotrophic Bacteria ◽  
The Impact

Geomicrobiology, the marriage of geology and microbiology, is about the impact of microbes on Earth materials in terrestrial systems and sediments. Many geomicrobiological processes occur over long timescales. Even the slow growth and low activity of microbes, however, have big effects when added up over millennia. After reviewing the basics of bacteria–surface interactions, the chapter moves on to discussing biomineralization, which is the microbially mediated formation of solid minerals from soluble ions. The role of microbes can vary from merely providing passive surfaces for mineral formation, to active control of the entire precipitation process. The formation of carbonate-containing minerals by coccolithophorids and other marine organisms is especially important because of the role of these minerals in the carbon cycle. Iron minerals can be formed by chemolithoautotrophic bacteria, which gain a small amount of energy from iron oxidation. Similarly, manganese-rich minerals are formed during manganese oxidation, although how this reaction benefits microbes is unclear. These minerals and others give geologists and geomicrobiologists clues about early life on Earth. In addition to forming minerals, microbes help to dissolve them, a process called weathering. Microbes contribute to weathering and mineral dissolution through several mechanisms: production of protons (acidity) or hydroxides that dissolve minerals; production of ligands that chelate metals in minerals thereby breaking up the solid phase; and direct reduction of mineral-bound metals to more soluble forms. The chapter ends with some comments about the role of microbes in degrading oil and other fossil fuels.

scholarly journals Oxidation of Citalopram with Sodium Hypochlorite and Chlorine Dioxide: Influencing Factors and NDMA Formation Kinetics

Molecules ◽  
2019 ◽  
Vol 24 (17) ◽  
pp. 3065
Author(s):  
Juan Lv ◽  
Yan Wang ◽  
Na Li
Keyword(s):  
Sodium Hypochlorite ◽  
Chlorine Dioxide ◽  
Wastewater Treatment Plants ◽  
Ph Value ◽  
High Reactivity ◽  
Secondary Effluent ◽  
Water Matrix ◽  
Formation Kinetics ◽  
Operational Variables ◽  
Two Stages

The highly prescribed antidepressant, citalopram, as one of newly emerging pollutants, has been frequently detected in the aquatic environment. Citalopram oxidation was examined during sodium hypochlorite (NaOCl) and chlorine dioxide (ClO2) chlorination processes since conventional wastewater treatment plants cannot remove citalopram effectively. Citalopram has been demonstrated to form N-nitrosodimethylamine (NDMA) during chlorination in our previous study. Further investigation on NDMA formation kinetics was conducted in the present study. Influences of operational variables (disinfectant dose, pH value) and water matrix on citalopram degradation, as well as NDMA generation, were evaluated. The results indicated high reactivity of citalopram with NaOCl and ClO2. NDMA formation included two stages during CIT oxidation, which were linear related with reaction time. NaOCl was more beneficial to remove CIT, but it caused more NDMA formation. Increasing disinfectant dosage promoted citalopram removal and NDMA formation. However, no consistent correlation was found between citalopram removal and pH. Contrary to the situation of citalopram removal, NDMA generation was enhanced when citalopram was present in actual water matrices, especially in secondary effluent. DMA, as an intermediate of citalopram chlorination, contributed to NDMA formation, but not the only way.

A solid-phase extraction method that eliminates matrix effects of complex pulp mill effluents for the analysis of lipophilic wood extractives

2020 ◽  
Vol 35 (4) ◽  
pp. 577-588
Author(s):  
Sebastian España Orozco ◽  
Philipp Zeitlinger ◽  
Karin Fackler ◽  
Robert H. Bischof ◽  
Antje Potthast
Keyword(s):  
Solid Phase Extraction ◽  
Matrix Effects ◽  
Solid Phase ◽  
Internal Standard ◽  
Pulp Mill ◽  
Phase Extraction ◽  
Wood Extractives ◽  
Wood Extractive ◽  
Pulp Mill Effluents ◽  
The Impact

AbstractThe extraction of lipophilic wood extractives from pulp and paper process waters proves to be a challenging task, due to harsh and alternating process and sample conditions. This study has determined the potential use of polymeric sorbents for solid-phase extraction (SPE) and compared to classical silica-based reversed-phase packed columns, with polymeric hydrophilic-lipophilic balanced (HLB) cartridges being the sorbent with the most potential. Recovery functions were obtained with an internal standard mixture representative for the main lipophilic wood extractive groups, which are fatty acids and alcohols, sterols, sterol esters and triglycerides. The impact of pH, sample volume and sample matrix, expressed as TOC and cations, on the retention behavior of lipophilic extractives during SPE of industrial samples were determined with polymeric HLB sorbent. High variations in the composition of pulp mill matrices led to different optimal extraction conditions. Thus, a new SPE protocol was developed, which bypasses matrix interferences and omits the loss of analytes due to sample preparation. The method is applicable to different pulp mill effluents with large discrepancies in pH and sample matrices, resulting in recoveries >90 % with RSD <5 % for all lipophilic wood extractives.

scholarly journals Solid-Phase Extraction Embedded Dialysis (SPEED), an Innovative Procedure for the Investigation of Microbial Specialized Metabolites

Marine Drugs ◽  
2021 ◽  
Vol 19 (7) ◽  
pp. 371
Author(s):  
Phuong-Y Mai ◽  
Géraldine Le Goff ◽  
Erwan Poupon ◽  
Philippe Lopes ◽  
Xavier Moppert ◽  
...  
Keyword(s):  
Solid Phase Extraction ◽  
Solid Phase ◽  
Chemical Space ◽  
Molecular Profile ◽  
Phase Extraction ◽  
Specialized Metabolites ◽  
Streptomyces Albidoflavus ◽  
Cultivation Process ◽  
The Impact

Solid-phase extraction embedded dialysis (SPEED technology) is an innovative procedure developed to physically separate in-situ, during the cultivation, the mycelium of filament forming microorganisms, such as actinomycetes and fungi, and the XAD-16 resin used to trap the secreted specialized metabolites. SPEED consists of an external nylon cloth and an internal dialysis tube containing the XAD resin. The dialysis barrier selects the molecular weight of the trapped compounds, and prevents the aggregation of biomass or macromolecules on the XAD beads. The external nylon promotes the formation of a microbial biofilm, making SPEED a biofilm supported cultivation process. SPEED technology was applied to the marine Streptomyces albidoflavus 19-S21, isolated from a core of a submerged Kopara sampled at 20 m from the border of a saltwater pond. The chemical space of this strain was investigated effectively using a dereplication strategy based on molecular networking and in-depth chemical analysis. The results highlight the impact of culture support on the molecular profile of Streptomyces albidoflavus 19-S21 secondary metabolites.

Persistent end-diastolic forward flow after pulmonary valve replacement in patients with repaired tetralogy of Fallot

2021 ◽  
Author(s):  
Yuji Tominaga ◽  
Masaki Taira ◽  
Takashi Kido ◽  
Tomomitsu Kanaya ◽  
Kanta Araki ◽  
...  
Keyword(s):  
Tetralogy Of Fallot ◽  
Valve Replacement ◽  
Pulmonary Valve ◽  
Pulmonary Valve Replacement ◽  
Right Atrial ◽  
Volume Index ◽  
Forward Flow ◽  
Repaired Tetralogy Of Fallot ◽  
Increased Risk ◽  
The Impact

Abstract OBJECTIVES The clinical significance of persistent end-diastolic forward flow (EDFF) after pulmonary valve replacement (PVR) remains unclear in patients with repaired tetralogy of Fallot. This study aimed to identify the characteristics of these patients and the impact of persistent EDFF on outcomes. METHODS Of 46 consecutive patients who underwent PVR for moderate to severe pulmonary regurgitation between 2003 and 2019, 23 (50%) did not show EDFF before PVR [group (−)]. In the remaining 23 patients with EDFF before PVR, EDFF was diminished after PVR in 13 (28%) [group (+, −)] and persisted in 10 (22%) [group (+, +)]. The following variables were compared between these 3 groups: (i) preoperative right ventricular (RV) and right atrial volumes measured by magnetic resonance imaging, haemodynamic parameters measured by cardiac catheterization and the degree of RV myocardial fibrosis measured by RV biopsy obtained at PVR and (ii) the post-PVR course, development of atrial arrhythmia and need for intervention. RESULTS A high RV end-diastolic pressure, a greater right atrial volume index and a greater RV end-systolic volume index before PVR and a high degree of RV fibrosis were significantly associated with persistent EDFF 1 year after PVR. Persistent EDFF was a significant risk factor for postoperative atrial tachyarrhythmia, and catheter ablation and pacemaker implantation were required more frequently in these patients. CONCLUSIONS Persistent EDFF after PVR could predict a worse prognosis, especially an increased risk of arrhythmia. Close follow-up is required in patients with persistent EDFF for early detection of arrhythmia and prompt reintervention if necessary. Clinical trial registration number Institutional review board of Osaka University Hospital, number 16105

Sign in / Sign up

Export Citation Format

Share Document