scholarly journals Spatial and temporal variation of salt ions in the surface water of Shule River Valley in Gansu Province, China

2018 ◽  
Vol 19 (2) ◽  
pp. 662-670 ◽  
Author(s):  
Quan en Guo ◽  
Bao guo Li ◽  
Li li Nan ◽  
Zhong nan Nie ◽  
Shi yu Cao
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
River Water ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Gansu Province ◽  
Spatial And Temporal Variation ◽  
Dissolved Solids ◽  
Lower Region ◽  
Water Ph

Abstract The objective of the study was to assess the quality of the Shule River water for irrigational purposes. Surface water samples were collected along the course of the river in May and October 2012. The samples were analyzed for pH, electrical conductivity (EC), bicarbonate, chloride, sulphate, sodium, potassium, calcium and magnesium. Surface water was generally alkaline (average pH 8.17) and water pH and total dissolved solids in May were higher than those in October. EC ranged from 0.24 to 2.15 mS cm−1. Sodium was identified as the dominant cation, sulphate was identified as the dominant anion in May for both samples of river water but, in October, the dominant anions are respectively sulphate, bicarbonate and chloride from the upper region to the lower region. The total dissolved solids, chloride and sodium were found to exceed the permissible limits for irrigation water in the lower region. According to the principal factor analysis results, among water quality parameters measured in this study, chloride is the best indicator for monitoring water quality. The results revealed a deteriorating water quality in the lower region of the river.

scholarly journals RESPONSE SURFACE METHODOLOGY VIA DESIRABILITY FUNCTION TECHNIQUES FOR OPTIMIZING CORRELATED RESPONSES OF ELECTRICAL CONDUCTIVITY AND TOTAL DISSOLVED SOLIDS OF SELECTED BOREHOLE WATER

2020 ◽  
Vol 4 (3) ◽  
pp. 333-342
Author(s):  
KEHINDE MONSURU YUSUFF ◽  
M. Lawal ◽  
A. T. Audu ◽  
O. A. Wale-Orojo
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Water Source ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Physical Parameters ◽  
Dissolved Solids

The health benefits in the description and observation of quantitative contents of quality parameters present or contained in any water source cannot be underestimated as they determine selection of best choice from available water sources for different intended uses as well as resource consumption. It also helps to compare the observed quantity of the quality with the acceptable standards or limits to get desired results. Physical parameters like pH, temperature, electrical conductivity (EC) and total dissolved solids (TDS) among others are determined by present of other chemical properties like Cations (Mg2+, Ca2+, Na+, etc), Anions (Cl-, NO3-, SO42+, etc), heavy metals and other dissolved materials during the course of its formation in different proportions and amounts. This study observed EC and TDS of 20 selected boreholes as two close and correlated water quality parameters as well as two of the major water quality parameters that account for overall quality of any water source, despite their different quantitative contents and physical features, they are likely determined by the same set of cations and anions with similar constraint equations. In contrast to linear programming, multiple criteria optimization models were fitted for EC and TDS using Response Surface Methodology via desirability techniques, optimal values obtained in this case measured against several criteria are found to lie between acceptable standards limits for drinking water, other numerical values and descriptive features in the final results reflect that the response equations obtained were well fitted.

scholarly journals Researchof Water Quality and its Chemical Parameters by Titration Method and Instrumenal Method

2019 ◽  
Vol 8 (6S4) ◽  
pp. 871-874
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Water Samples ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Analysis ◽  
Instrumental Method ◽  
Titration Method ◽  
Dissolved Solids

he water quality analysis is an important aspect in understanding the behavior of water and what can they be used for. This study gives us a valuable information on the general properties of water quality parameters like pH, electrical conductivity, TDS, Bicarbonate, Sulfate, Nitrate, chloride etc. of the study area . Water samples were analyzed at the water quality lab. NIH, Roorkee for pH, electrical conductivity and total dissolved solids. The pH of water varied from 7.14 to 7.75. The electrical conductivity (EC) of sample falls from 620µS/cm to 2000µS/cm. The overall total dissolved solids in water of study area varied from 120mg/l to 900mg/l. Overall the range of the Chloride in water of the study area tend to falls between 13mg/l to 375mg/l. Sulfate of all the water samples that were collected from the study area have ranged from 28mg/l to 250mg .The range of the Bicarbonate of all the water samples varied from 320mg/l to 1051mg/l. The study area helps to know about water quality parameters and how to find their values by usingtwo methods : 1) titration method 2) instrumental method .It also helps us to apply these water quality parameters in ArcGis. It helps us to show the values of different parameters in different blocks ofambala for different years In this we have studied different blocks of ambala district Haryana .We have taken the samples from different places from the blocks and also samples are from wells, canal , rivers, ponds.

scholarly journals Evaluation of Water Quality Parameters in Shatt AL-Arab, Southern Iraq, Using Spatial Analysis

Hydrology ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 79 ◽  
Author(s):  
Zahraa Q. Lateef ◽  
Abdul-Sahib T. Al-Madhhachi ◽  
Dawood E. Sachit
Keyword(s):  
Water Quality ◽  
Spatial Analysis ◽  
Arabian Gulf ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Data Availability ◽  
Water Quality Parameters ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Southern Iraq

The present work illustrates the potential application of techniques of spatial analysis via geographic information systems (GIS) to categorize the distribution of temporal and spatial of water prediction characteristics to determine the water quality parameters of the Shatt Al-Arab River (SAA), southern Iraq. Eight main water quality parameters and three heavy metals were measured from December 2018 to October 2019. The total dissolved solids, chloride, sulfate, and total hardness were compared with previous data that were measured from 2014 to 2018 based on data availability. The geochemical characteristics were also investigated to analyze water quality parameters. The study was performed by selecting eleven stations according to the nature areas of SAA. Water samples were acquired from the eleven stations for four seasons (winter of 2018 through autumn of 2019). Results revealed that total dissolved solids ranged between 950 to 8500 mg/L, total hardness varied from 400 to 2394 mg/L as calcium carbonate (CaCO3), the sulfate ranged from 149 to 1602 mg/L, and chloride ranged from 330 to 3687 mg/L. The results showed that SAA had high salinity with a low hazard of sodicity. The SAA waters mainly fall below the Dolomite-Magnesite tie-lines which indicated the dissolution of carbonate rocks. This research also found that the study area confined from Al-Maqal station to Abu Flus port station where the salty marine water coming from the Arabian Gulf remains for longer periods. The SAA is not suitable for drinking and irrigation water according to Iraqi and World Health Organization (WHO) standards. This study suggested building a blocking dam downstream of the SAA to prevent salty water from coming back from Arabian Gulf.

scholarly journals Water quality assessments and metagenomic analysis of the polluted river Apatlaco, Mexico

2019 ◽  
Author(s):  
Luz Breton-Deval ◽  
Katy Juárez ◽  
Alejandro Sánchez-Flores ◽  
Rosario Vera-Estrella
Keyword(s):  
Water Quality ◽  
Dissolved Oxygen ◽  
Chemical Oxygen Demand ◽  
Oxygen Demand ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Freshwater Ecosystems ◽  
Dissolved Solids ◽  
The People ◽  
Nitrite Nitrate

ABSTRACTThe aim of this study is to analyze the water quality parameters and bacterial diversity and thereby understand the effect of water quality on the microbial population structure in the river. The following parameters: total coliforms, chemical oxygen demand, harness, ammonium, nitrite, nitrate, total Kjeldahl nitrogen, dissolved oxygen, total phosphorus, total dissolved solids, and temperature were analyzing along 17 sampling points in the river. The worst levels of pollution were 510 mg/L chemical oxygen demand, 7 mg/L nitrite, 45 mg/L nitrate, 2 mg/L dissolved oxygen, and 756 mg/L of total dissolved solids. Whole metagenome shotgun sequencing was performed at 4 key points along the river (P1,P7,P10 and P17), the first point had clean water and the other points were polluted, as a result of this pollution, the structure of microbial communities along the river have changed. Proteobacteria and Bacteroidetes were the most representative phyla with a relative abundance of 57 and 43% respectively for P1, 82 and 15% for P7, 69 and 27% for P10 and 87 and 10% for the last point P17. P1 is rich in microorganism such as Limnohabitans a planktonic bacterium very common in freshwater ecosystems. However, in P7, P10 and P17 are rich in opportunistic pathogens such as Acinetobacter Arcobacter and Myroides that endangers the health of around 1.6 million people which live around the area. These results elucidate the influence of the pollution on the microbial community and the likely effects on the health of the people around.

scholarly journals The Effect of Diyala River Water Quality on the Quality of Tigris River Water using GIS Mapping

2019 ◽  
Vol 25 (10) ◽  
pp. 71-87
Author(s):  
Fatima Muqdad Al-Rubaie ◽  
Nawar Omran Al-Musawi
Keyword(s):  
Water Quality ◽  
River Water ◽  
Total Dissolved Solids ◽  
River Water Quality ◽  
Environmental Data ◽  
Total Alkalinity ◽  
Dissolved Solids ◽  
Tigris River ◽  
Diyala River

The assessment of a river water’ quality is an essential procedure of monitor programs and is used to collect basic environmental data. The management of integrated water resources in a sustainable method is also necessary to allow future generations to meet their water needs. The main objective of this research is to assess the effect of the Diyala River on Tigris River water quality using Geographic Information System (GIS) technique. Water samples have been collected monthly from November 2017 to April 2018 from four selected locations in Tigris and Diyala Rivers using the grab sampling method. Fourteen parameters were studied which are Turbidity, pH, Dissolved Oxygen, Biological Oxygen Demand, Electrical Conductivity, Total Dissolved Solids, Total Hardness, Calcium, Magnesium, Chloride, Sulphate, Phosphate, Sodium, and Total Alkalinity. The results of GIS maps showed that the water quality of the Tigris River nearly affected by the water quality of the Diyala River within the locations selected. The maps also reveal that in March and April 2018 the quality of surface water got a sudden peak compared with the other months. This is due to the increase in both the parameter of Turbidity and Total Dissolved Solids.  

scholarly journals An Appraisal of Groundwater Contamination : A Case Study of Shallow Wells In Agbowo Community, Southwestern Nigeria

2019 ◽  
pp. 104-115
Author(s):  
Abudulawal L. ◽  
Apanpa K. A.
Keyword(s):  
Water Quality ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
World Health ◽  
Dissolved Solids ◽  
Southwestern Nigeria ◽  
Permissible Limits ◽  
Physico Chemical ◽  
Shallow Wells

Abundant as it may seem in Nigeria, access to clean and potable water is a great challenge. Hence the reason for determination of the physico-chemical properties of the groundwater in Agbowo community in Ibadan, Oyo state Southwestern Nigeria for domestic uses. Water samples collected from thirty-four (34) shallow wells with varying depths were subjected to chemical analysis. The water quality parameters were analyzed in accordance to standard methods. The groundwater analysis reviewed includes pH, electrical conductivity, total dissolved solids (TDS), others include Ca<sup>2+</sup>, Mg<sup>2+</sup>, K<sup>+</sup> Na<sup>+</sup>, Fe<sup>2+</sup>, NO<sub>3</sub>, Cl<sup>-</sup> SO<sub>4</sub><sup>2-</sup> and HCO<sub>3</sub><sup>- </sup>The results indicated that the parameters analyzed have some falling within the limits and some above the maximum permissible limits in accordance to Nigeria Industrial Standard (NIS) and World Health Organization (WHO) guidelines for drinking water. In general, the data revealed that maxima and minima concentrations of the priority physico-chemical water quality parameters examined in the thirty-four (34) water points were mostly within the Target Water Quality Range (TWQR) for domestic use with little exceptions at some points. However, high nitrate concentrations and Total Dissolved Solids (TDS) above the permissible limits in some of the well water sampled are causes for serious concern. Poor construction, lack of maintenance, proximity to sewage tank and stream, as well as indiscriminate dumping of refuse are suggested as the major causes of this development. The overall implication of this observation call for sustenance and improved water resource management strategy for the area in order to prevent the deterioration of the water sources quality, which may pose associated health risks and environmental hazards.

scholarly journals Kajian Kualitas Air Tanah dan Sungai pada Kawasan Rawan Banjir di Kabupaten Serang Kaitannya dengan Penyediaan Air Bersih

2019 ◽  
Vol 20 (1) ◽  
pp. 45
Author(s):  
Heru Sri Naryanto ◽  
Prihartanto Prihartanto ◽  
Deliyanti Ganesha
Keyword(s):  
Water Quality ◽  
Surface Water ◽  
Suspended Solids ◽  
Total Dissolved Solids ◽  
Clean Water ◽  
Dissolved Solids ◽  
Surface Water And Groundwater ◽  
Flood Prone Areas ◽  
Quality Measurements

ABSTRACTSerang District is one of the flood-prone areas, that about 20 subdistricts were affected by the flood in Serang District. Problems of clean water necessity occurred in the flood area, especially water quality in both of surface water and groundwater. To know the condition of clean water in Serang District, it is necessary to study the quality of water both surface water and groundwater in the flood-prone areas. The study was conducted by water sampling and in-situ water quality measurements at 28 open-pit points used by communities and river bodies in the potential flood in 2012-2015. In-situ physical water quality measurements are performed during sampling of well water and river water using multiparameter quality checker equipment. Water quality parameters that were measured in-situ are total dissolved solids (TDS) and turbidity. Laboratory tests of water samples were performed for suspended solids (TSS), Ammonium (NH3-N), Iron (Fe), Manganese (Mn) and total hardness parameters. The standard method of water quality analysis of these parameters is carried out using Indonesian National Standard SNI 06-6989.3-2004 water and wastewater. Turbidity tends to increase towards the downstream of the river indicating additional sediment material is transported downstream. The high total suspended solids in the river, especially in Kragilan, is caused by the waste from high domestic, commercial, and industrial activities in the area. Generally, groundwater and surface water in the flood areas at the study sites still largely indicate that quality is still feasible for consumption by the community, except for high Fe and Mn content and NH3-N in some wells due to the influence of surface water entering groundwater.Keywords: Serang district, water quality, flood areas, water supply ABSTRAKKabupaten Serang termasuk wilayah yang rawan banjir, dari 29 kecamatan yang ada sekitar 20 kecamatan pernah terkena dampak banjir. Permasalahan kebutuhan air bersih terjadi pada kawasan banjir tersebut, terutama kualitas air baik air permukaan maupun airtanah. Untuk mengetahui secara rinci kondisi air bersih di kabupaten Serang, maka perlu dilakukan kajian kualitas air baik air permukaan maupun airtanah pada kawasan rawan banjir tersebut. Kajian dilakukan dengan pengambilan sampel air dan pengukuran in-situ kualitas air pada 28 titik sumur terbuka yang digunakan oleh masyarakat dan badan air sungai pada wilayah potensial genangan banjir tahun 2012-2015. Pengukuran kualitas air fisik secara in-situ dilakukan pada saat pengambilan sampel air sumur dan air sungai dengan menggunakan peralatan multiparameter quality checker, adalah: zat padat terlarut (total dissolved solids/TDS) dan turbiditas/kekeruhan. Sedangkan pemeriksaan laboratorium terhadap sampel air dilakukan untuk parameter zat padat tersuspensi (total suspended solid/TSS), Amonia bebas NH3-N), Besi (Fe), Mangan (Mn) dan kesadahan total. Metode standard analisis kualitas air terhadap parameter-parameter tersebut dilaksanakan menggunakan Standard Nasional Indonesia SNI 06-6989.3-2004 air dan air limbah. Kekeruhan cenderung meningkat ke arah hilir sungai menunjukkan adanya tambahan material sedimen tertransport pada bagian hilir. Tingginya zat padat tersuspensi pada sungai khususnya di Kragilan akibat dampak limbah dari aktivitas domestik, komersial dan industri yang tinggi di daerah tersebut. Secara umum airtanah dan air permukaan pada daerah banjir di lokasi penelitian sebagian besar masih menunjukkan kualitas yang masih layak untuk dikonsumsi oleh masyarakat, kecuali kandungan Fe dan Mn yang tinggi serta NH3-N pada beberapa sumur penduduk akibat pengaruh air permukaan termasuk air banjir masuk ke dalam airtanah.Kata kunci: Kabupaten Serang, kualitas air, kawasan banjir, penyediaan air bersih

EFFECT OF COVERING IRRIGATION CHANNELS ON TOTAL DISSOLVED SOLIDS AND TOTAL SUSPENDED SOLIDS

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sherine Ahmed ElBaradei ◽  
Mai Wagih AlSadeq ◽  
Sarah Ehab Abdel Kader
Keyword(s):  
Water Quality ◽  
Suspended Solids ◽  
Total Suspended Solids ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Main Concern ◽  
Irrigation Canals ◽  
Dissolved Solids ◽  
Water Losses

The increase in the evaporation rate is one of the crucial effects of climate change. Water losses due to evaporation are considered as an important challenge that faces the agriculture sector considering the recent water crisis in Egypt. So, covering irrigation canals with the aim to decrease evaporation could be a good solution for this problem, especially if the coverage is expected to be used for power production by covering these canals with solar panels. However, the main concern is the effect of the covering on the quality of water. So, this research study investigates the effect of irrigation canals’ covering on rates of evaporation and some water quality variables specifically total dissolved solids (TDS) and total suspended solids (TSS). The results of the study showed that covering irrigation canals will have a significant effect on water quality parameters. It is found that the studied water quality parameters; TSS and TDS both are decreasing from 56.39 to 56.35 mg/l and from 160.15 to 160.00 mg/l, respectively by increasing the percentage coverage of the canal from 0% to 100%.

scholarly journals Modeling Water Quality Parameters Using Data-Driven Models, a Case Study Abu-Ziriq Marsh in South of Iraq

Hydrology ◽  
2019 ◽  
Vol 6 (1) ◽  
pp. 24 ◽  
Author(s):  
Mustafa Al-Mukhtar ◽  
Fuaad Al-Yaseen
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Performance Criteria ◽  
Total Hardness ◽  
Efficiency Coefficient ◽  
Dissolved Solids ◽  
South Of Iraq

Total dissolved solids (TDS) and electrical conductivity (EC) are important parameters in determining water quality for drinking and agricultural water, since they are directly associated to the concentration of salt in water and, hence, high values of these parameters cause low water quality indices. In addition, they play a significant role in hydrous life, effective water resources management and health studies. Thus, it is of critical importance to identify the optimum modeling method that would be capable to capture the behavior of these parameters. The aim of this study was to assess the ability of using three different models of artificial intelligence techniques: Adaptive neural based fuzzy inference system (ANFIS), artificial neural networks (ANNs) and Multiple Regression Model (MLR) to predict and estimate TDS and EC in Abu-Ziriq marsh south of Iraq. As so, eighty four monthly TDS and EC values collected from 2009 to 2018 were used in the evaluation. The collected data was randomly split into 75% for training and 25% for testing. The most effective input parameters to model TDS and EC were determined based on cross-correlation test. The three performance criteria: correlation coefficient (CC), root mean square error (RMSE) and Nash–Sutcliffe efficiency coefficient (NSE) were used to evaluate the performance of the developed models. It was found that nitrate (NO3), calcium (Ca+2), magnesium (Mg+2), total hardness (T.H), sulfate (SO4) and chloride (Cl−1) are the most influential inputs on TDS. While calcium (Ca+2), magnesium (Mg+2), total hardness (T.H), sulfate (SO4) and chloride (Cl−1) are the most effective on EC. The comparison of the results showed that the three models can satisfactorily estimate the total dissolved solids and electrical conductivity, but ANFIS model outperformed the ANN and MLR models in the three performance criteria: RMSE, CC and NSE during the calibration and validation periods in modeling the two water quality parameters. ANFIS is recommended to be used as a predictive model for TDS and EC in the Iraqi marshes.

Sign in / Sign up

Export Citation Format

Share Document