scholarly journals Risk-based sensor placement methods for burst/leak detection in water distribution systems

2017 ◽  
Vol 17 (6) ◽  
pp. 1663-1672 ◽  
Author(s):  
E. Forconi ◽  
Z. Kapelan ◽  
M. Ferrante ◽  
H. Mahmoud ◽  
C. Capponi
Keyword(s):  
Distribution Systems ◽  
Water Distribution ◽  
Social Economic ◽  
Water Distribution Systems ◽  
Water System ◽  
Water Distribution Network ◽  
Leak Detection ◽  
Optimal Placement ◽  
Water Volume ◽  
The Impact

Abstract The optimal placement of sensors for burst/leak detection in water distribution systems is usually formulated as an optimisation problem. In this study three different risk-based functions are used to drive optimal location of a given number of sensors in a water distribution network. A simple function based on likelihood of leak non-detection is compared with two other risk-based functions, where impact and exposure are combined with the leak detection likelihood. The impact is considered proportional to the demand water volume while the exposure is related to the importance of the connections and it is evaluated in social, economic or safety terms. The methods are applied to a district metered area of the Harrogate network by means of a modified EPANET model, to take into account the pressure-driven functioning conditions of the system. The results show that the exposure can lead to a different sensor location ranking with respect to other criteria used and hence the proposed methodology can represent a useful tool for water system managers to distribute the sensors in the network, complying with hydraulic, social and economical requirements.

scholarly journals Modeling Bacterial Regrowth and Trihalomethane Formation in Water Distribution Systems

Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 463
Author(s):  
Gopinathan R. Abhijith ◽  
Leonid Kadinski ◽  
Avi Ostfeld
Keyword(s):  
Distribution Systems ◽  
Water Distribution ◽  
Mechanistic Model ◽  
Water Distribution Systems ◽  
Sensitivity Study ◽  
Operating Conditions ◽  
Growth Rate Constant ◽  
Model Parameters ◽  
Bacterial Regrowth ◽  
The Impact

The formation of bacterial regrowth and disinfection by-products is ubiquitous in chlorinated water distribution systems (WDSs) operated with organic loads. A generic, easy-to-use mechanistic model describing the fundamental processes governing the interrelationship between chlorine, total organic carbon (TOC), and bacteria to analyze the spatiotemporal water quality variations in WDSs was developed using EPANET-MSX. The representation of multispecies reactions was simplified to minimize the interdependent model parameters. The physicochemical/biological processes that cannot be experimentally determined were neglected. The effects of source water characteristics and water residence time on controlling bacterial regrowth and Trihalomethane (THM) formation in two well-tested systems under chlorinated and non-chlorinated conditions were analyzed by applying the model. The results established that a 100% increase in the free chlorine concentration and a 50% reduction in the TOC at the source effectuated a 5.87 log scale decrement in the bacteriological activity at the expense of a 60% increase in THM formation. The sensitivity study showed the impact of the operating conditions and the network characteristics in determining parameter sensitivities to model outputs. The maximum specific growth rate constant for bulk phase bacteria was found to be the most sensitive parameter to the predicted bacterial regrowth.

scholarly journals Assessing the Impact of DMAs and the Use of Boosters on Chlorination in a Water Distribution Network in Greece

Water ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2141
Author(s):  
Stavroula Tsitsifli ◽  
Vasilis Kanakoudis
Keyword(s):  
Water Distribution ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Assessment Process ◽  
Water Volume ◽  
Pressure Management ◽  
Water Age ◽  
Chlorination Process ◽  
Management Measures ◽  
The Impact

Disinfection is one of the most important water treatment processes as it inactivates pathogens providing safe drinking water to the consumers. A fresh-water distribution network is a complex system where constant monitoring of several parameters and related managerial decisions take place in order for the network to operate in the most efficient way. However, there are cases where some of the decisions made to improve the network’s performance level, such as reduction of water losses, may have negative impacts on other significant operational processes such as the disinfection. In particular, the division of a water distribution network into district metered areas (DMAs) and the application of various pressure management measures may impact the effectiveness of the water chlorination process. Two operational measures are assessed in this paper: (a) the use of inline chlorination boosters to achieve more efficient chlorination; and (b) how the DMAs formation impacts the chlorination process. To achieve this, the water distribution network of a Greek town is chosen as a case study where several scenarios are being thoroughly analyzed. The assessment process utilizes the network’s hydraulic simulation model, which is set up in Watergems V8i software, forming the baseline to develop the network’s water quality model. The results proved that inline chlorination boosters ensure a more efficient disinfection, especially at the most remote parts/nodes of the network, compared to conventional chlorination processes (e.g., at the water tanks), achieving 100% safe water volume and consuming almost 50% less chlorine mass. DMAs’ formation results in increased water age values up to 8.27%, especially at the remote parts/nodes of the network and require more time to achieve the necessary minimum effective chlorine concentration of 0.2 mg/L. However, DMAs formation and pressure management measures do not threaten the chlorination’s efficiency. It is important to include water age and residual chlorine as criteria when optimizing water pressure and the division of DMAs.

scholarly journals Optimal placement of valves in a water distribution network with CLP(FD)

2011 ◽  
Vol 11 (4-5) ◽  
pp. 731-747 ◽  
Author(s):  
MASSIMILIANO CATTAFI ◽  
MARCO GAVANELLI ◽  
MADDALENA NONATO ◽  
STEFANO ALVISI ◽  
MARCO FRANCHINI
Keyword(s):  
Logic Programming ◽  
Distribution Systems ◽  
Water Distribution ◽  
Distribution Network ◽  
Real Life ◽  
Water Distribution Network ◽  
Distribution Networks ◽  
Constraint Logic Programming ◽  
Optimal Placement ◽  
Isolation System

AbstractThis paper presents a new application of logic programming to a real-life problem in hydraulic engineering. The work is developed as a collaboration of computer scientists and hydraulic engineers, and applies Constraint Logic Programming to solve a hard combinatorial problem. This application deals with one aspect of the design of a water distribution network, i.e., the valve isolation system design. We take the formulation of the problem by Giustolisi and Savić (2008 Optimal design of isolation valve system for water distribution networks. InProceedings of the 10th Annual Water Distribution Systems Analysis Conference WDSA2008, J. Van Zyl, A. Ilemobade, and H. Jacobs, Eds.) and show how, thanks to constraint propagation, we can get better solutions than the best solution known in the literature for the Apulian distribution network. We believe that the area of the so-calledhydroinformaticscan benefit from the techniques developed in Constraint Logic Programming and possibly from other areas of logic programming, such as Answer Set Programming.

Stochastic approach for performance evaluation regarding water distribution systems

2007 ◽  
Vol 56 (9) ◽  
pp. 29-36 ◽  
Author(s):  
M. Möderl ◽  
T. Fetz ◽  
W. Rauch
Keyword(s):  
Performance Evaluation ◽  
Case Studies ◽  
Distribution Systems ◽  
Water Distribution ◽  
Performance Indicator ◽  
Water Distribution Systems ◽  
Stochastic Approach ◽  
Cumulative Distribution ◽  
Design System ◽  
The Impact

A traditional procedure for performance evaluation of systems is to test approaches on one or more case studies. However, it is well known that the investigation of real case studies is a tedious task. Moreover, due to the limited amount of case studies available it is not certain that all aspects of a problem can be covered in such procedure. With increasing computer power an alternative methodology has emerged, that is the investigation of a multitude of virtual case studies by means of a stochastic consideration of the overall performance. Within the frame of this approach we develop here a modular design system (MDS) for water distribution systems (WDSs). With the algorithmic application of such a MDS it is possible to create a variety of different WDSs. As an example of stochastic performance evaluation the impact of pipe breakages on WDSs is estimated applying a pressure driven performance indicator. This performance indicator is evaluated stochastically. Likewise the performance evaluation of a variety of WDSs is also performed stochastically. Cumulative distribution function, histogram and other statistical properties of 2,280×1,000 performance results of the different WDSs are calculated to highlight the applicability of the introduced stochastic approach.

Sign in / Sign up

Export Citation Format

Share Document