scholarly journals Corrigendum: Journal of Water Reuse and Desalination 10 (1), 70–81: Removal of brilliant green (BG) from aqueous solution by using low cost biomass Salix alba leaves (SAL): thermodynamic and kinetic studies, Rashida Fiaz, Muhammad Hafeez and Rashid Mahmood, doi: 10.2166/wrd.2020.054

2020 ◽  
Author(s):  
Rashida Fiaz ◽  
Muhammad Hafeez ◽  
Rashid Mahmood
Keyword(s):  
Aqueous Solution ◽  
Water Reuse ◽  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Salix Alba

scholarly journals Removal of brilliant green (BG) from aqueous solution by using low cost biomass Salix alba leaves (SAL): thermodynamic and kinetic studies

2020 ◽  
Vol 10 (1) ◽  
pp. 70-81
Author(s):  
Rashida Fiaz ◽  
Muhammad Hafeez ◽  
Rashid Mahmood
Keyword(s):  
Aqueous Solution ◽  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Sorption Process ◽  
Salix Alba ◽  
Batch Studies ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Maximum Removal

Abstract The removal of brilliant green dye (BGD) from aqueous solution by using Salix alba leaves (SAL) was carried out via batch studies. The maximum removal efficiency was found to be 95.2% with initial dye concentration 50 mg/L at 0.15 g adsorbent dosage, pH = 6, and 298 K temperature, and the equilibrium was observed within 3½ hours. The adsorption capacity increased (2.21–15.89 mg/g) from 10 to 50 mg/L of dye concentration. Kinetic and isotherm studies were also carried out. The results showed that pseudo-second order model better describes the adsorption mechanism. The isotherm equilibrium data analysis was carried out by using Freundlich and Langmuir models and the sorption process was observed to conform with the Langmuir isotherm with linear correlation coefficient (R2 = 0.99). The thermodynamic properties ΔG°, ΔH°, and ΔS° delineated that BGD adsorption over SAL was feasible, spontaneous, and endothermic between 303 and 323 K temperature.

scholarly journals Organic Dyes Adsorption on the Almond Shell (Prunus dulcis) as Agricultural Solid Waste from Aqueous Solution in Single and Binary Mixture Systems

2021 ◽  
Vol 12 (2) ◽  
pp. 2022-2040
Keyword(s):  
Aqueous Solution ◽  
Binary Mixture ◽  
Contact Time ◽  
Binary Systems ◽  
Organic Dyes ◽  
Low Cost ◽  
Kinetic Studies ◽  
Prunus Dulcis ◽  
Order Kinetic ◽  
Almond Shell

Almond shell (AS) is a low-cost adsorbent used in this study for the removal of methylene blue (MB), crystal violet (CV), and Congo red (CR) from an aqueous solution in single and mixture binary systems. The low-cost adsorbent was characterized by FTIR and SEM analysis. The effects of AS dose, contact time, initial dye concentration, pH, and temperature on MB, CV, and CR adsorption were studied in a single system. In a binary system, the MB, CV, and CR were removed from the mixture of MB+CR, CV+MB, and CV+CR with a percentage in volume ranging from 0 to 100 % in MB and CV, and CR. Kinetic studies showed rapid sorption following a second-order kinetic model with of contact time of 10 min. The modulation of adsorption isotherms showed that retention follows the Langmuir model. The thermodynamic parameters proved that the MB, CV, and CR adsorption process was feasible, spontaneous, and exothermic. The synergy adsorption between dyes in a binary mixture of MB+CR and CV+CR, while the competition adsorption between dyes in a binary mixture of MB+ CV.

scholarly journals Brilliant Green and Acid Orange 74 Dyes Removal from Water by Pinus roxburghii Leaves in Naturally Benign Way: An Application of Green Chemistry

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Rabia Rehman ◽  
Sara Jan Muhammad ◽  
Muhammad Arshad
Keyword(s):  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Pinus Roxburghii ◽  
Acid Orange ◽  
Pseudo Second Order ◽  
Optimized Conditions ◽  
Adsorbent Dose ◽  
Dyes Removal

The purpose of this study was to use low cost and easily accessible biosorbent for batch-scale elimination of brilliant green and acid orange 74 dyes from aqueous solution. Pinus roxburghii leaves were utilized to study their dye-eliminating capacities. The adsorbent was characterized by FTIR, TGA, DTA, and SEM. The optimized conditions for brilliant green and acid orange 74 dye elimination were adsorbent dose, 1.2 and 1.8 g; contact time, 30 and 45 min; pH, 2 and 1; temperature, 50°C and 60°C; and agitation speed, 125 rpm and 50 rpm for BG and AO-74, respectively. Adsorption records well fitted Langmuir isotherm. Possibility of the procedure was shown by negative values of the thermodynamic parameter ∆G° for both dyes. Kinetic studies showed that adsorption of BG and AO-74 dyes from watery solution by PR leaves followed pseudo-second-order kinetics.

scholarly journals Equilibrium and Kinetic Studies for The Adsorptive Removal of Lead (II) Ions from Aqueous Solution Using Activated Plantain Peel Biochar

2020 ◽  
Vol 4 (1) ◽  
pp. 9-16
Author(s):  
FS Nworie ◽  
EC Oroke ◽  
II Ikelle ◽  
JS Nworu
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Intraparticle Diffusion Model ◽  
Activated Biochar ◽  
Bet Analysis

AbstractStudies on the adsorption of Pb(II) on plantain peels biochar (PPB) was conducted. The carbonized and activated, biochar was characterized using Braunauer-Emmett-Teller (BET) surface area and x-ray diffraction crystallography (XRD). BET analysis of the PPB indicated that the pore size (cc/g) and pore surface area (m2/g) was 8.79 and 16.69 respectively. Result of the XRD evaluated through Debye-Scherrer equation, showed a nanostructure with crystallite size of 14.56 nm. Effects of initial metal ion concentration, pH, and contact time were studied in a batch reaction process. Results showed that the adsorption of lead from aqueous solution increased with an increase in pH and initial concentration. Equilibrium modeling studies suggested that the data fitted mainly to the Langmuir isotherm. Adsorption kinetic data tested using various kinetic models fitted the Weber and Morris intraparticle diffusion model implicating pore diffusion as the main rate limiting step. The sorption studies indicated the potential of plantain peel biochar as an effective, efficient and low cost adsorbent for remediating lead (II) ions contaminated environment.

scholarly journals Application of Factorial Design for the Optimization of Hexavalent Chromium Removal Using a New Low-cost Adsorbent: Adsorption Isotherms, Thermodynamic and Kinetic Studies

2021 ◽  
Vol 12 (1) ◽  
pp. 1247-1262
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Experimental Design ◽  
Hexavalent Chromium ◽  
Low Cost ◽  
Research Work ◽  
Kinetic Studies ◽  
Factorial Experimental Design ◽  
Initial Ph ◽  
Adsorbent Dose

This research work involved using factorial experimental design techniques to investigate the adsorption of hexavalent chromium from an aqueous solution on medlar activated carbon. A 24 full factorial experimental design was employed to determine the optimum values and degree of importance of parameters: pH, initial Cr (VI) concentration, adsorbent dose, and contact time at two levels. The optimized conditions for hexavalent chromium Cr (VI) removal were at initial pH 1.5, 5 mg.L−1Cr (VI), adsorbent dose 6 mg, and 60 min adsorption time. The results predicted a good agreement between the predicted values (R2= 0.9909), as obtained by the model, and the experimental value (R2= 0.9977). The main effects and interaction effects were analyzed using analysis of variance (ANOVA), F-test and P-values to define the most important process variables affecting Cr (VI) adsorption. The most significant variables were therefore the pH of the solution and the adsorbent dose. Therefore, the present results demonstrate that medlar activated carbon should be regarded as a low-cost alternative for removing Cr (VI) from an aqueous solution. The adsorption data were evaluated by Langmuir, Freundlich, and Dubinin-Radushkevich isotherms. The results showed that the Langmuir isotherm model best describes the equilibrium adsorption with a high correlation coefficient.

scholarly journals Sorption of Bivalent Ions by Cymbopogon citratus: Characterisation and Investigation of Biosorptive Capacity and Mechanism

2018 ◽  
Vol 4 (3) ◽  
pp. 297-302
Author(s):  
S. Jayashree ◽  
Jeyavathana Samuel ◽  
R. Vashantha
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Low Cost ◽  
Kinetic Studies ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Physical Parameters ◽  
Cymbopogon Citratus ◽  
Equilibrium Data

The main objective of this study was to investigate the removal of cadmium(II) ions from aqueous solution using raw Cymbopogon citratus as an adsorbent. It was characterized by FT-IR, XRD, SEM-EDAX and its physical parameters were analyzed. Different factors such as pH, contact time, initial concentration and temperature were studied. Maximum adsorption was taken place at the optimum pH of 6 and the equilibrium data were analyzed by Langmuir, Freundlich and Temkin Isotherm models. Among those isotherm models Langmuir and Temkin were fitted well with good correlation coefficient (R2). The negative values of ΔG⁰ for all temperature shows the adsorption process for cadmium(II) ion was spontaneous in nature and feasible. The negative value of enthalpy change ΔH⁰ shows the adsorption process is exothermic and the positive value of ΔS⁰ indicates the disorderness or randomness process of adsorption. The positive value of Ea indicates the higher solution temperature favors the adsorption of metal ion onto RCC. The experimental data were analyzed by kinetic studies such as pseudo-first order, pseudo-second order and intra-particle diffusion models. Desorption was also studied and the recovery of the adsorbent was found to be 10%. Thus on the basis of these investigations the present study concludes that the raw Cymbopogon citratus (RCC) was found to be highly effective, nontoxic, environmental friendly and low cost adsorbent for the removal of toxic Cd(II) ions from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document