Performance evaluation of anaerobic baffled reactor (ABR) treating pulp and paper wastewater in start-up period

2015 ◽  
Vol 10 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Abolghasem Alighardashi ◽  
Meghdad Modanlou ◽  
Shervin Jamshidi
Keyword(s):  
Wastewater Treatment ◽  
Chemical Oxygen Demand ◽  
Volatile Fatty Acids ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Pulp And Paper ◽  
Anaerobic Baffled Reactor ◽  
Start Up ◽  
Paper Wastewater

This essay outlines the use of an anaerobic baffled reactor (ABR) treating pulp and paper wastewater during its start-up period. For this purpose, a pilot with four chambers and overall volume of 45 liters was fed continuously through the equalization tank of Mazandaran wood and paper wastewater treatment plant, in the north of Iran. The influent was classified as low strength slowly biodegradable wastewater. The average soluble chemical oxygen demand (SCOD) and biochemical oxygen demand (BOD) of the influent were about 1,130 and 320 mg/L, respectively. Results show that the start-up was accomplished in 90 days in which the ABR reached its maximum SCOD removal of 60%. This was achieved at the controlled mesophilic temperature (37 °C) and optimum hydraulic retention time (HRT) of 24 hours. In spite of the influent characteristics, the performance of ABR has not been inhibited and mostly influenced by HRT. The gradual hydrolysis and acidogenesis were observed within the ABR. The majority of chemical oxygen demand (COD) removal takes place in the first chamber. In addition, the concentrations of readily biodegradable organics (BOD to COD ratio) have been increased and doubled through the reactor. Moreover, the total values of pH, volatile fatty acids and alkalinity remained constant. Consequently, this system can be approved for application as a pretreatment unit for paper mill industrial wastewater treatment plants.

scholarly journals Precious Data from Tiny Samples: Revealing the Correlation Between Energy Content and the Chemical Oxygen Demand of Municipal Wastewater by Micro-Bomb Combustion Calorimetry

2021 ◽  
Vol 9 ◽  
Author(s):  
Benjamin Korth ◽  
Claudia Heber ◽  
Monika Normant-Saremba ◽  
Thomas Maskow ◽  
Falk Harnisch
Keyword(s):  
Wastewater Treatment ◽  
Chemical Oxygen Demand ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Energy Content ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Combustion Calorimetry ◽  
Energy Potential ◽  
Combustion Enthalpy

Wastewater treatment plants (WWTP) are aimed to be transformed from sinks into sources of energy and material. For fostering corresponding engineering efforts and economic assessments, comprehensive knowledge of the energy content of wastewater is required. We show in this proof-of-concept study that these data can be gathered by combining micro-bomb combustion calorimetry with freeze-drying. Thereby, the methodology for measuring the combustion enthalpy (ΔcH) of wastewater is significantly improved by decreasing the time demand for the drying process as only tiny amounts of samples are required. Here, the effluent of the primary clarifier of a wastewater treatment plant treating low-strength municipal wastewater was sampled on a weekly basis for 1 year, yielding 53 composite samples that were analyzed for ΔcH and standard wastewater parameters. A robust correlation between the chemical oxygen demand (COD) and ΔcH of −14.9 ± 3.5 kJ gCOD−1 (r = 0.51) was determined, verifying previous results obtained with more laborious and time-demanding methodologies. The global chemical energy potential of the sampled WWTP is presumably higher as the first treatment steps and losses during sample preparation reduced the amount of energy-rich compounds. A stronger correlation was observed between ΔcH and the biochemical oxygen demand (BOD5, r = 0.64), suggesting its usage for predicting the potential of wastewater as feedstock for biotechnological applications. This demonstrates that micro-bomb combustion calorimetry can be applied for deriving precious information on the energy content of wastewater from simple COD measurements.

Metro-environmental data approach for the prediction of chemical oxygen demand in new Nicosia wastewater treatment plant

2021 ◽  
Vol 221 ◽  
pp. 31-40
Author(s):  
A.S. Mubarak ◽  
Parvaneh Esmaili ◽  
Z.S. Ameen ◽  
R.A. Abdulkadir ◽  
M.S. Gaya ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Chemical Oxygen Demand ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Environmental Data

scholarly journals Initiating Biodegradation of Polyvinylpyrrolidone in an Aqueous Aerobic Environment: Technical Note / Zainicjowanie Biodegradacji Poliwinylopirolidonu W Środowisku Wodno-Tlenowym: Notatki Techniczne

2013 ◽  
Vol 20 (1) ◽  
pp. 199-208 ◽  
Author(s):  
Marketa Julinova ◽  
Jan Kupec ◽  
Roman Slavik ◽  
Maria Vaskova
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Waste Treatment ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Technical Note ◽  
Aerobic Biodegradation ◽  
Municipal Wastewater Treatment

Abstract A synthetic polymer, polyvinylpyrrolidone (PVP - E 1201) primarily finds applications in the pharmaceutical and food industries due to its resistance and zero toxicity to organisms. After ingestion, the substance passes through the organism unchanged. Consequently, it enters the systems of municipal wastewater treatment plants (WWTP) without decomposing biologically during the waste treatment process, nor does it attach (through sorption) to particles of activated sludge to any significant extent, therefore, it passes through the system of a WWTP, which may cause the substance to accumulate in the natural environment. For this reason the paper investigates the potential to initiate aerobic biodegradation of PVP in the presence of activated sludge from a municipal wastewater treatment plant. The following agents were selected as the initiators of the biodegradation process - co-substrates: acrylamide, N-acethylphenylalanine and 1-methyl-2-pyrrolidone, a substance with a similar structure to PVP monomer. The biodegradability of PVP in the presence of co-substrates was evaluated on the basis of biological oxygen demand (BOD) as determined via a MicroOxymax O2/CO2/CH4 respirometer. The total substrate concentration in the suspension equaled 400 mg·dm-3, with the ratio between PVP and the cosubstrate being 1:1, while the concentration of the dry activated sludge was 500 mg·dm-3. Even though there was no occurrence of a significant increase in the biodegradation of PVP alone in the presence of a co-substrate, acrylamide appeared to be the most effective type of co-substrate. Nevertheless, a recorded decrease in the slope of biodegradation curves over time may indicate that a process of primary decomposition was underway, which involves the production of metabolites that inhibit activated sludge microorganisms. The resulting products are not identified at this stage of experimentation.

scholarly journals Physico-chemical investigation of wastewater from the Sebdou-Tlemcen textile complex North-West Algeria

2021 ◽  
Vol 6 (2) ◽  
pp. 361-370
Author(s):  
Asma Khelassi- Sefaoui ◽  
Abderrahmane Khechekhouche ◽  
Manel Zaoui-Djelloul Daouadji ◽  
Hamza Idrici
Keyword(s):  
Wastewater Treatment ◽  
Chemical Oxygen Demand ◽  
Water Temperature ◽  
Biochemical Oxygen Demand ◽  
Suspended Solids ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
North West ◽  
Physico Chemical ◽  
West Algeria

Wastewater treatment is a process used in several countries, particularly in Algeria. A study on Earth for one month was carried out at the sewage plant of the Sebdou textile complex, Tlemcen, north-west of Algeria. Regular samples gave average values at the outlet such that the water temperature is 22 ° C, the ph 7.43, the biochemical oxygen demand BOD5 is 36.5 mg / l, the chemical oxygen demand COD vary between 100 and 200 mg / l at the exit of the WWTP mg / l and finally suspended solids SS is of the order of 36.2 mg / l. All these values conform with the standards and therefore the treatment plant operates within Algerian standards.

scholarly journals Excessive greenhouse gas emissions from wastewater treatment plants by using the chemical oxygen demand standard

2021 ◽  
Author(s):  
Zongqing Lv ◽  
Xiaoyu Shan ◽  
Xilin Xiao ◽  
Ruanhong Cai ◽  
Yao Zhang ◽  
...  
Keyword(s):  
Organic Matter ◽  
Wastewater Treatment ◽  
Chemical Oxygen Demand ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Carbon Sink ◽  
Oxygen Demand ◽  
Organic Pollution ◽  
Municipal Wastewater Treatment ◽  
Recalcitrant Organic Matter

AbstractChemical oxygen demand (COD) is widely used as an organic pollution indicator in wastewater treatment plants. Large amounts of organic matter are removed during treatment processes to meet environmental standards, and consequently, substantial greenhouse gases (GHGs) such as methane (CH4) are released. However, the COD indicator covers a great amount of refractory organic matter that is not a pollutant and could be a potential carbon sink. Here, we collected and analysed COD data from 86 worldwide municipal wastewater treatment plants (WWTPs) and applied a model published by the Intergovernmental Panel on Climate Change to estimate the emission of CH4 due to recalcitrant organic compound processing in China’s municipal wastewater treatment systems Our results showed that the average contribution of refractory COD to total COD removal was 55% in 86 WWTPs. The amount of CH4 released from the treatment of recalcitrant organic matter in 2018 could have been as high as 38.22 million tons of carbon dioxide equivalent, which amounts to the annual carbon sequestered by China’s wetlands. This suggests that the use of COD as an indicator for organic pollution is undue and needs to be revised to reduce the emission of GHG. In fact, leaving nontoxic recalcitrant organic matter in the wastewater may create a significant carbon sink and will save energy during the treatment process, aiming at carbon neutrality in the wastewater treatment industry.

scholarly journals Prediction of Wastewater Quality at a Wastewater Treatment Plant Inlet Using a System Based on Machine Learning Methods

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 85
Author(s):  
Barbara Wodecka ◽  
Jakub Drewnowski ◽  
Anita Białek ◽  
Ewa Łazuka ◽  
Joanna Szulżyk-Cieplak
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Ammonium Nitrogen ◽  
Support Vector ◽  
Process Conditions ◽  
Wastewater Quality

One of the important factors determining the biochemical processes in bioreactors is the quality of the wastewater inflow to the wastewater treatment plant (WWTP). Information on the quality of wastewater, sufficiently in advance, makes it possible to properly select bioreactor settings to obtain optimal process conditions. This paper presents the use of classification models to predict the variability of wastewater quality at the inflow to wastewater treatment plants, the values of which depend only on the amount of inflowing wastewater. The methodology of an expert system to predict selected indicators of wastewater quality at the inflow to the treatment plant (biochemical oxygen demand, chemical oxygen demand, total suspended solids, and ammonium nitrogen) on the example of a selected WWTP—Sitkówka Nowiny, was presented. In the considered system concept, a division of the values of measured wastewater quality indices into lower (reduced values of indicators in relation to average), average (typical and most common values), and upper (increased values) were adopted. On the basis of the calculations performed, it was found that the values of the selected wastewater quality indicators can be identified with sufficient accuracy by means of the determined statistical models based on the support vector machines and boosted trees methods.

Sign in / Sign up

Export Citation Format

Share Document