Industrial wastewater treatment by on-site pilot static granular bed reactor (SGBR)

2012 ◽  
Vol 7 (1) ◽  
Author(s):  
Jaeyoung Park ◽  
Jin Hwan Oh ◽  
Eric A. Evans ◽  
Michael F. Lally ◽  
Keith L. Hobson ◽  
...  

The on-site pilot-scale Static Granular Bed Reactor (SGBR) was used to treat the dairy processing wastewater at the Tulare Industrial Wastewater Treatment Plant (IWTP). A pilot unit with approximately 42.5 m3 of active volume was operated for 7 months on a continuous basis with a range of 9 to 48 h HRT condition at ambient temperature. Throughout the whole study, COD and BOD5 removal was consistently over 90% under a broad range of organic loading conditions ranging from 0.63 to 9.72 kg/m3/d. TSS removal was also greater than 80% on average. In terms of organic removal, the SGBR system was robust to the temperature variations ranging from 10 to 29 °C. The adequate periodic backwashing consistently provided the maintenance of a head loss and the wastewater level in the reactor. Based on these results, the SGBR seems to be an excellent alternative for the required pretreatment system from the Tulare IWTP. Several benefits for IWTP could be provided by a full scale application of SGBR due to its simple design and operational advantages over conventional high rate anaerobic systems.

2002 ◽  
Vol 46 (1-2) ◽  
pp. 29-33 ◽  
Author(s):  
A. Duine ◽  
S. Kunst

Over a period of 6 months, pilot plant investigations were carried out with the purpose of bulking sludge control with different aerobic selectors. The wastewater was dominated by industrial dischargers, containing volatile fatty acids up to 450 mg/l. With complete-mix-selectors it was not possible to achieve a stable SVI below 150 ml/g. The bulking sludge could only be controlled with a sectionalized selector (HRT 5–8 minutes per section). The SVI decreased to values below 100 ml/g. Shock-loads and increased VFA-concentrations (by dosing NaC2H3OO) did not cause filamentous growth.


1988 ◽  
Vol 20 (10) ◽  
pp. 201-210 ◽  
Author(s):  
S. Matsui ◽  
Y. Okawa ◽  
R. Ota

Twenty-eight process wastewaters and thirty-seven organic substances identified in the wastewater of the Kashima petrochemical complex were subjected to biodegradability tests. The tests consisted of the activated sludge degradability method and a supplementary test using the respiration meter method. Both tests utilized the activated sludge of the Fukashiba industrial wastewater treatment plant, which was acclimatized to the wastewater and organic substances. The 28 process wastewaters were classified into biodegradable, less biodegradable, and non-biodegradable according to the percentage TOC removal and the BOD5/TOC ratio of the wastewater. The 37 organic substances were also classified into biodegradable, less biodegradable and non-biodegradable according to TOC and CODMn removal. In general, chlorinated compounds, nitro-aromatics and polymerized compounds were difficult to biodegrade. From the biodegradability tests of the factory wastewaters, it was found that the refractory CODMn loads of these factories contributed to the load remaining in the effluent of the wastewater treatment plant. Various improvements were made to reduce the discharge of refractory substances from the factories.


Sign in / Sign up

Export Citation Format

Share Document