scholarly journals Assessing the impact of arid area urbanization on flash floods using GIS, remote sensing, and HEC-HMS rainfall–runoff modeling

2016 ◽  
Vol 47 (6) ◽  
pp. 1142-1160 ◽  
Author(s):  
Mohamed El Alfy
Keyword(s):  
Remote Sensing ◽  
Hydrologic Modeling ◽  
Integrated Approach ◽  
Flash Floods ◽  
Landsat 8 ◽  
Arid Areas ◽  
Rainfall Runoff ◽  
Rapid Urbanization ◽  
Runoff Modeling ◽  
The Impact

This study uses an integrated approach, bringing together geographic information system (GIS), remote sensing, and rainfall–runoff modeling, to assess the urbanization impact on flash floods in arid areas. Runoff modeling was carried out as a function of the catchment characteristics and the maximum daily rainfall parameters. Land-use types were extracted from the supervised classification of SPOT-5 (2010) and Landsat-8 (2015) satellite images and were validated during field checks. Catchment morphometric characteristics were carried out using the correlated Topaz and Arc-Hydro tools. Maximum floods of the catchment were evaluated by coupling GIS and remote sensing with Hydrologic Engineering Center–Hydrologic Modeling System (HEC-HMS) hydrologic modeling. Peak discharges were estimated, and the abstraction losses were computed for different return periods. The model results were calibrated according to actual runoff event. The research shows that rapid urbanization adversely affects hydrological processes, since the sprawl on the alluvial channels is significant. This reduces infiltration into the underlying alluvium and increases runoff, leading to higher flood peaks and volumes even for short duration low intensity rainfall. To retain a considerable amount of water and sediments in these arid areas, construction of small dams at the fingertip channels at the outlet of the lower order sub-basins is recommended.

scholarly journals Impact of Urbanization on Urban Heat Island Intensity in Major Districts of Bangladesh Using Remote Sensing and Geo-Spatial Tools

Climate ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 3
Author(s):  
Md. Naimur Rahman ◽  
Md. Rakib Hasan Rony ◽  
Farhana Akter Jannat ◽  
Subodh Chandra Pal ◽  
Md. Saiful Islam ◽  
...  
Keyword(s):  
Climate Change ◽  
Remote Sensing ◽  
Urban Heat Island ◽  
Urban Expansion ◽  
Winter Period ◽  
Landsat 8 ◽  
Heat Island ◽  
Rapid Urbanization ◽  
Urban Heat ◽  
The Impact

Urbanization is closely associated with land use land cover (LULC) changes that correspond to land surface temperature (LST) variation and urban heat island (UHI) intensity. Major districts of Bangladesh have a large population base and commonly lack the resources to manage fast urbanization effects, so any rise in urban temperature influences the population both directly and indirectly. However, little is known about the impact of rapid urbanization on UHI intensity variations during the winter dry period in the major districts of Bangladesh. To this end, we aim to quantify spatiotemporal associations of UHI intensity during the winter period between 2000 and 2019 using remote-sensing and geo-spatial tools. Landsat-8 and Landsat-5 imageries of these major districts during the dry winter period from 2000 to 2020 were used for this purpose, with overall precision varying from 81% to 93%. The results of LULC classification and LST estimation showed the existence of multiple UHIs in all major districts, which showed upward trends, except for the Rajshahi and Rangpur districts. A substantial increase in urban expansion was observed in Barisal > 32%, Mymensingh > 18%, Dhaka > 17%, Chattogram > 14%, and Rangpur > 13%, while a significant decrease in built-up areas was noticed in Sylhet < −1.45% and Rajshahi < −3.72%. We found that large districts have greater UHIs than small districts. High UHI intensities were observed in Mymensingh > 10 °C, Chattogram > 9 °C, and Barisal > 8 °C compared to other districts due to dense population and unplanned urbanization. We identified higher LST (hotspots) zones in all districts to be increased with the urban expansion and bare land. The suburbanized strategy should prioritize the restraint of the high intensity of UHIs. A heterogeneous increase in UHI intensity over all seven districts was found, which might have potential implications for regional climate change. Our study findings will enable policymakers to reduce UHI and the climate change effect in the concerned districts.

Impact of LULC Changes on LST in Rajshahi District of Bangladesh: A Remote Sensing Approach

2020 ◽  
Vol 3 (1) ◽  
pp. 11-23 ◽  
Author(s):  
Abdulla Al Kafy ◽  
Abdullah Al-Faisal ◽  
Mohammad Mahmudul Hasan ◽  
Md. Soumik Sikdar ◽  
Mohammad Hasib Hasan Khan ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Surface Temperature ◽  
Land Surface ◽  
Agricultural Land ◽  
Global Climate ◽  
Urban Expansion ◽  
Water Bodies ◽  
Landsat 8 ◽  
Lulc Changes ◽  
The Impact

Urbanization has been contributing more in global climate warming, with more than 50% of the population living in cities. Rapid population growth and change in land use / land cover (LULC) are closely linked. The transformation of LULC due to rapid urban expansion significantly affects the functions of biodiversity and ecosystems, as well as local and regional climates. Improper planning and uncontrolled management of LULC changes profoundly contribute to the rise of urban land surface temperature (LST). This study evaluates the impact of LULC changes on LST for 1997, 2007 and 2017 in the Rajshahi district (Bangladesh) using multi-temporal and multi-spectral Landsat 8 OLI and Landsat 5 TM satellite data sets. The analysis of LULC changes exposed a remarkable increase in the built-up areas and a significant decrease in the vegetation and agricultural land. The built-up area was increased almost double in last 20 years in the study area. The distribution of changes in LST shows that built-up areas recorded the highest temperature followed by bare land, vegetation and agricultural land and water bodies. The LULC-LST profiles also revealed the highest temperature in built-up areas and the lowest temperature in water bodies. In the last 20 years, LST was increased about 13ºC. The study demonstrates decrease in vegetation cover and increase in non-evaporating surfaces with significantly increases the surface temperature in the study area. Remote-sensing techniques were found one of the suitable techniques for rapid analysis of urban expansions and to identify the impact of urbanization on LST.

scholarly journals Retrieving Total and Inorganic Suspended Sediments in Amazon Floodplain Lakes: A Multisensor Approach

2019 ◽  
Vol 11 (15) ◽  
pp. 1744 ◽  
Author(s):  
Daniel Maciel ◽  
Evlyn Novo ◽  
Lino Sander de Carvalho ◽  
Cláudio Barbosa ◽  
Rogério Flores Júnior ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Atmospheric Correction ◽  
Suspended Sediments ◽  
Floodplain Lakes ◽  
Empirical Modeling ◽  
Landsat 8 ◽  
Amazon Floodplain ◽  
The Impact ◽  
Sentinel 2

Remote sensing imagery are fundamental to increasing the knowledge about sediment dynamics in the middle-lower Amazon floodplains. Moreover, they can help to understand both how climate change and how land use and land cover changes impact the sediment exchange between the Amazon River and floodplain lakes in this important and complex ecosystem. This study investigates the suitability of Landsat-8 and Sentinel-2 spectral characteristics in retrieving total (TSS) and inorganic (TSI) suspended sediments on a set of Amazon floodplain lakes in the middle-lower Amazon basin using in situ Remote Sensing Reflectance (Rrs) measurements to simulate Landsat 8/OLI (Operational Land Imager) and Sentinel 2/MSI (Multispectral Instrument) bands and to calibrate/validate several TSS and TSI empirical algorithms. The calibration was based on the Monte Carlo Simulation carried out for the following datasets: (1) All-Dataset, consisting of all the data acquired during four field campaigns at five lakes spread over the lower Amazon floodplain (n = 94); (2) Campaign-Dataset including samples acquired in a specific hydrograph phase (season) in all lakes. As sample size varied from one season to the other, n varied from 18 to 31; (3) Lake-Dataset including samples acquired in all seasons at a given lake with n also varying from 17 to 67 for each lake. The calibrated models were, then, applied to OLI and MSI scenes acquired in August 2017. The performance of three atmospheric correction algorithms was also assessed for both OLI (6S, ACOLITE, and L8SR) and MSI (6S, ACOLITE, and Sen2Cor) images. The impact of glint correction on atmosphere-corrected image performance was assessed against in situ glint-corrected Rrs measurements. After glint correction, the L8SR and 6S atmospheric correction performed better with the OLI and MSI sensors, respectively (Mean Absolute Percentage Error (MAPE) = 16.68% and 14.38%) considering the entire set of bands. However, for a given single band, different methods have different performances. The validated TSI and TSS satellite estimates showed that both in situ TSI and TSS algorithms provided reliable estimates, having the best results for the green OLI band (561 nm) and MSI red-edge band (705 nm) (MAPE < 21%). Moreover, the findings indicate that the OLI and MSI models provided similar errors, which support the use of both sensors as a virtual constellation for the TSS and TSI estimate over an Amazon floodplain. These results demonstrate the applicability of the calibration/validation techniques developed for the empirical modeling of suspended sediments in lower Amazon floodplain lakes using medium-resolution sensors.

scholarly journals Monitoring Sugarcane Growth Phases Based on Satellite Image Analysis (A Case Study in Indramayu and its Surrounding, West Java, Indonesia)

2019 ◽  
Vol 26 (3) ◽  
pp. 117
Author(s):  
Tri Muji Susantoro ◽  
Ketut Wikantika ◽  
Agung Budi Harto ◽  
Deni Suwardi
Keyword(s):  
Remote Sensing ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Satellite Image ◽  
Landsat 8 ◽  
Gas Field ◽  
Research Results ◽  
The Third ◽  
Third Phase ◽  
The Impact

This study is intended to examine the growing phases and the harvest of sugarcane crops. The growing phases is analyzed with remote sensing approaches. The remote sensing data employed is Landsat 8. The vegetation indices of Normalized Difference Vegetation Index (NDVI) and Enhanced Normalized Difference Vegetation Index (ENDVI) are employed to analyze the growing phases and the harvest of sugarcane crops. Field survey was conducted in March and August 2017. The research results shows that March is the peak of the third phase (Stem elonging phase or grand growth phase), the period from May to July is the fourth phase (maturing or ripening phase), and the period from August to October is the peak of harvest. In January, the sugarcane crops begin to grow and some sugarcane crops enter the third phase again. The research results also found the sugarcane plants that do not grow well near the oil and gas field. This condition is estimated due as the impact of hydrocarbon microseepage. The benefit of this research is to identify the sugarcane growth cycle and harvest. Having knowing this, it will be easier to plan the seed development and crops transport.

scholarly journals Monitoring of specially protected natural territories of forest-steppe landscapes of the Stavropol upland by means of remote sensing data

2021 ◽  
Vol 27 (1) ◽  
pp. 364-376
Author(s):  
Tigran Shahbazyan
Keyword(s):  
Remote Sensing ◽  
Satellite Imagery ◽  
Satellite Images ◽  
Remote Sensing Data ◽  
Anthropogenic Factors ◽  
Forest Steppe ◽  
Landsat 8 ◽  
Sensing Data ◽  
Ndvi Index ◽  
The Impact

The article considers the methodology of monitoring specially protected natural areas using remote sensing data. The research materials are satellite images of the Landsat 5 and Landsat 8 satellites, obtained from the resource of the US Geological Survey. The key areas of the study were 3 specially protected areas located within the boundaries of the forest-steppe landscapes of the Stavropol upland, the reserves «Alexandrovskiy», «Russkiy Les», «Strizhament». The space survey materials were selected for the period 1991–2020, and the data from the summer seasons were used. The NDVI index is chosen as the method of processing the spectral channels of satellite imagery. To integrate long-term satellite imagery into a single raster image, the method of variance of the variation series for the NDVI index was used. The article describes an algorithm for processing satellite images, which allows us to identify the features of the dynamics of the vegetation state of the studied territory for the period 1991–2020. The bitmap image constructed by means of the variance of the NDVI index was classified by the quantile method, to translate numerical values into classes with qualitative characteristics. There were 4 classes of the territory according to the degree of dynamism of the vegetation state: “stable”, “slightly variable”, “moderately variable”, “highly variable”. The paper highlights the factors of landscape transformation, including natural and anthropogenic ones. In the course of the study, the determining influence of anthropogenic factors of transformation was noted. The greatest impact is on the reserve «Alexandrovskiy», the least on the reserve «Russkiy Les», in the reserve «Strizhament» the impact is expressed locally. The paper identifies the leading anthropogenic factors of vegetation transformation, based on their influence on vegetation.

RAINFALL-RUNOFF MODELING FOR EXTREME FLASH FLOODS IN WADI SAMAIL, OMAN

2018 ◽  
Vol 74 (5) ◽  
pp. I_691-I_696 ◽  
Author(s):  
Mohammed ABDEL-FATTAH ◽  
Sameh A. KANTOUSH ◽  
Mohamed SABER ◽  
Tetsuya SUMI
Keyword(s):  
Flash Floods ◽  
Rainfall Runoff ◽  
Runoff Modeling

scholarly journals Impact of the Grid Resolution and Deterministic Interpolation of Precipitation on Rainfall-Runoff Modeling in a Sparsely Gauged Mountainous Catchment

Water ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 230
Author(s):  
Paweł Gilewski
Keyword(s):  
Hydrological Cycle ◽  
Interpolation Method ◽  
Grid Size ◽  
Rainfall Runoff ◽  
Degree Polynomial ◽  
Mountainous Catchment ◽  
Runoff Modeling ◽  
Simulation Results ◽  
The Impact ◽  
Inverse Distance

Precipitation is a key variable in the hydrological cycle and essential input data in rainfall-runoff modeling. Rain gauge data are considered as one of the best data sources of precipitation but before further use, the data must be spatially interpolated. The process of interpolation is particularly challenging over mountainous areas due to complex orography and a usually sparse network of rain gauges. This paper investigates two deterministic interpolation methods (inverse distance weighting (IDW), and first-degree polynomial) and their impact on the outputs of semi-distributed rainfall-runoff modeling in a mountainous catchment. The performed analysis considers the aspect of interpolation grid size, which is often neglected in other than fully-distributed modeling. The impact of the inverse distance power (IDP) value in the IDW interpolation was also analyzed. It has been found that the best simulation results were obtained using a grid size smaller or equal to 750 m and the first-degree polynomial as an interpolation method. The results indicate that the IDP value in the IDW method has more impact on the simulation results than the grid size. Evaluation of the results was done using the Kling-Gupta efficiency (KGE), which is considered to be an alternative to the Nash-Sutcliffe efficiency (NSE). It was found that KGE generally tends to provide higher and less varied values than NSE which makes it less useful for the evaluation of the results.

scholarly journals Observations and Recommendations for the Calibration of Landsat 8 OLI and Sentinel 2 MSI for Improved Data Interoperability

2018 ◽  
Vol 10 (9) ◽  
pp. 1340 ◽  
Author(s):  
Dennis Helder ◽  
Brian Markham ◽  
Ron Morfitt ◽  
Jim Storey ◽  
Julia Barsi ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Sensor Calibration ◽  
Landsat 8 ◽  
Data Sets ◽  
Optical Remote Sensing ◽  
Data Interoperability ◽  
Satellite Systems ◽  
Combining Data ◽  
The Impact ◽  
Sentinel 2

Combining data from multiple sensors into a single seamless time series, also known as data interoperability, has the potential for unlocking new understanding of how the Earth functions as a system. However, our ability to produce these advanced data sets is hampered by the differences in design and function of the various optical remote-sensing satellite systems. A key factor is the impact that calibration of these instruments has on data interoperability. To address this issue, a workshop with a panel of experts was convened in conjunction with the Pecora 20 conference to focus on data interoperability between Landsat and the Sentinel 2 sensors. Four major areas of recommendation were the outcome of the workshop. The first was to improve communications between satellite agencies and the remote-sensing community. The second was to adopt a collections-based approach to processing the data. As expected, a third recommendation was to improve calibration methodologies in several specific areas. Lastly, and the most ambitious of the four, was to develop a comprehensive process for validating surface reflectance products produced from the data sets. Collectively, these recommendations have significant potential for improving satellite sensor calibration in a focused manner that can directly catalyze efforts to develop data that are closer to being seamlessly interoperable.

scholarly journals A Remote Sensing Based Integrated Approach to Quantify the Impact of Fluvial and Pluvial Flooding in an Urban Catchment

2019 ◽  
Vol 11 (5) ◽  
pp. 577 ◽  
Author(s):  
Manoranjan Muthusamy ◽  
Monica Rivas Casado ◽  
Gloria Salmoral ◽  
Tracy Irvine ◽  
Paul Leinster
Keyword(s):  
Remote Sensing ◽  
Digital Terrain Model ◽  
Integrated Approach ◽  
Flood Management ◽  
Flood Damage ◽  
Water Flooding ◽  
Surface Model ◽  
Pluvial Flooding ◽  
Residential Properties ◽  
The Impact

Pluvial (surface water) flooding is often the cause of significant flood damage in urbanareas. However, pluvial flooding is often overlooked in catchments which are historically knownfor fluvial floods. In this study, we present a conceptual remote sensing based integrated approachto enhance current practice in the estimation of flood extent and damage and characterise the spatialdistribution of pluvial and fluvial flooding. Cockermouth, a town which is highly prone to flooding,was selected as a study site. The flood event caused by named storm Desmond in 2015 (5-6/12/2015)was selected for this study. A high resolution digital elevation model (DEM) was produced from acomposite digital surface model (DSM) and a digital terrain model (DTM) obtained from theEnvironment Agency. Using this DEM, a 2D flood model was developed in HEC-RAS (v5) 2D forthe study site. Simulations were carried out with and without pluvial flooding. Calibrated modelswere then used to compare the fluvial and combined (pluvial and fluvial) flood damage areas fordifferent land use types. The number of residential properties affected by both fluvial and combinedflooding was compared using a combination of modelled results and data collected from UnmannedAircraft Systems (UAS). As far as the authors are aware, this is the first time that remote sensingdata, hydrological modelling and flood damage data at a property level have been combined todifferentiate between the extent of flooding and damage caused by fluvial and pluvial flooding inthe same event. Results show that the contribution of pluvial flooding should not be ignored, evenin a catchment where fluvial flooding is the major cause of the flood damages. Although theadditional flood depths caused by the pluvial contribution were lower than the fluvial flood depths,the affected area is still significant. Pluvial flooding increased the overall number of affectedproperties by 25%. In addition, it increased the flood depths in a number of properties that wereidentified as being affected by fluvial flooding, in some cases by more than 50%. These findingsshow the importance of taking pluvial flooding into consideration in flood management practices.Further, most of the data used in this study was obtained via remote sensing methods, includingUAS. This demonstrates the merit of developing a remote sensing based framework to enhancecurrent practices in the estimation of both flood extent and damage.

Sign in / Sign up

Export Citation Format

Share Document