scholarly journals Calibration of a dynamic Eulerian-lagrangian model for the computation of wood cylinders transport in shallow water flow

2018 ◽  
Vol 21 (1) ◽  
pp. 164-179 ◽  
Author(s):  
Elisabetta Persi ◽  
Gabriella Petaccia ◽  
Stefano Sibilla ◽  
Pilar Brufau ◽  
Pilar García-Navarro
Keyword(s):  
Initial Conditions ◽  
Fluid Flows ◽  
Rigid Bodies ◽  
The Body ◽  
Lagrangian Model ◽  
Preliminary Evaluation ◽  
Floating Bodies ◽  
Inertia Coefficient ◽  
Planar Rotation ◽  
The Difference

Abstract A computational Eulerian–Lagrangian model (ORSA2D_WT) is used for modelling the movement of floating rigid bodies on the water surface. The two-dimensional transport is computed with a dynamic approach, modifying existing formulations for the transport of bodies within fluid flows for the case of floating bodies, by adopting suitable added mass, drag and side coefficients. An original formulation for planar rotation is proposed, which includes the effect of the hydrodynamic torque and a resistance term, named added inertia, based on the difference between the angular velocity of the flow and that of the body. The value of the added inertia coefficient is calibrated against experiments made on purpose, involving the transport of a cylinder in a flume with two side obstacles. The calibrated code is applied to a slightly larger set of experiments for its preliminary evaluation. The outcome of the simulations shows that the streamwise and transversal displacements are well modelled, while some inaccuracies arise when considering the cylinder orientation. The effects of the initial conditions on the cylinders' trajectory and rotation are discussed, showing their influence on the evolution of the rotation angles.

scholarly journals Calibration of a numerical model for the transport of floating wooden debris

2018 ◽  
Vol 40 ◽  
pp. 02012
Author(s):  
Elisabetta Persi ◽  
Gabriella Petaccia ◽  
Stefano Sibilla ◽  
José Ignacio García-Palacin ◽  
Pilar Brufau ◽  
...  
Keyword(s):  
Numerical Model ◽  
Angular Displacement ◽  
Rigid Bodies ◽  
The Body ◽  
Floating Bodies ◽  
Flume Experiments ◽  
Proposed Model ◽  
Inertia Coefficient ◽  
Stationary Conditions ◽  
High Reynolds

The paper describes the calibration of a numerical model to simulate the 2D motion of floating rigid bodies. The proposed model follows a one-way coupling Eulerian-Lagrangian approach, in which the solution of the Shallow Water Equations (SWE) is combined with the Discrete Element Method (DEM) to compute the displacement of rigid bodies. Floating bodies motion is computed by adapting the Maxey-Riley equation to the case of semi-submerged bodies at high Reynolds number. In order to account for the flow velocity distribution along the body axis, the elements are divided into shorter subsections. A specific formulation is proposed to calculate the rotation of wooden cylinders, by computing the angular momentum. The model includes also a term of added inertia, which accounts for the resistance to rotation and requires the calibration of a specific inertia coefficient. A series of flume experiments is performed to calibrate the model. The 2D trajectories of floating spheres and the linear and angular displacement of cylinders are recorded in stationary conditions. The comparison between the experimental data and the simulation shows that the numerical results are in agreement with the experimental ones, although less accuracy is observed in the reproduction of the angular displacement.

The Distribution of Temperatures in a Hot/Cold Die Set: The Effect of the Pressure, Temperature, and Material

1995 ◽  
Vol 117 (2) ◽  
pp. 220-227 ◽  
Author(s):  
J. G. Lenard ◽  
M. E. Davies
Keyword(s):  
Initial Conditions ◽  
Control Program ◽  
The Body ◽  
Temperature Fields ◽  
Surface Temperatures ◽  
Direct Measurements ◽  
Die Set ◽  
The Difference ◽  
Interface Pressures

Modern hot metalforming operations require a predictive-adaptive control program in which the predictive component precalculates the necessary parameters—such as temperatures and loads—and the adaptive component sets up, monitors and adjusts the forming equipment. One of the needs of a predictive model of the process is for an understanding of the boundary conditions at the surface of contact. For high temperature operations, one of these conditions is described by the heat transfer coefficient, relating the heat flux and the difference of the temperatures of the contacting surfaces, at the die-workpiece interface. The surface temperatures are, of course, dependent on the distribution of the temperatures within the body of the dies. The determination of these distributions is the topic of the present project. Thermocouples embedded in a cold/hot die set as well as thermocouples placed on the surface of contact are used to monitor the temperature fields, within the body as well as on the surfaces, for various interface pressures, initial temperatures and materials. The results indicate that direct measurements of the temperatures of the contacting surfaces is very difficult and may lead to significant errors. It is recommended that a mathematical model, which uses the measured internal temperatures as initial conditions, should be employed to calculate the contact surface temperatures.

scholarly journals Spinning Rigid Bodies Driven by Orbital Forcing: The Role of Dry Friction

2021 ◽  
Author(s):  
Pablo de Castro ◽  
Tiago Araújo Lima ◽  
Fernando Parisio
Keyword(s):  
Rigid Body ◽  
Dry Friction ◽  
Initial Conditions ◽  
Rigid Bodies ◽  
The Body ◽  
Driving Frequency ◽  
Orbital Forcing ◽  
Highly Nonlinear ◽  
Dynamical Regimes ◽  
Body Shapes

Abstract A ``circular orbital forcing'' makes a chosen point on a rigid body follow a circular motion while the body spins freely around that point. We investigate this problem for the planar motion of a body subject to dry friction. We focus on the effect called \emph{reverse rotation} (RR), where spinning and orbital rotations are antiparallel. Similar reverse dynamics include the rotations of Venus and Uranus, journal machinery bearings, tissue production reactors, and chiral active particles. Due to dissipation, RRs are possible only as a transient. Here the transient or \emph{flip} time $t_\textrm{f}$ depends on the circular driving frequency $\omega$, unlike the viscous case previously studied. We find $t_\textrm{f}\sim\omega^{\gamma-1}\mu^{-\gamma/2}$, where $\mu$ is the friction coefficient and $\gamma=0$ ($\gamma=2$) for low (high) $\omega$. Whether RRs really occur depends on the initial conditions as well as on $\mu$ and $H$, a geometrical parameter. The critical $H_\textrm{c}(\mu)$ where RRs become possible follows a $q$-exponential with $q\simeq1.9$, a more restrictive RR scenario than in the wet case. We use animations to visualize the different dynamical regimes that emerge from the highly nonlinear dissipation mechanism of dry friction. Our results are valid across multiple investigated rigid body shapes.

Our Bodies, Whose Property?

2013 ◽  
Author(s):  
Anne Phillips
Keyword(s):  
Labor Markets ◽  
Personal Autonomy ◽  
The Body ◽  
Body Parts ◽  
Complex Issue ◽  
Human Organs ◽  
Property Owners ◽  
The Common ◽  
The Difference ◽  
The Right

No one wants to be treated like an object, regarded as an item of property, or put up for sale. Yet many people frame personal autonomy in terms of self-ownership, representing themselves as property owners with the right to do as they wish with their bodies. Others do not use the language of property, but are similarly insistent on the rights of free individuals to decide for themselves whether to engage in commercial transactions for sex, reproduction, or organ sales. Drawing on analyses of rape, surrogacy, and markets in human organs, this book challenges notions of freedom based on ownership of our bodies and argues against the normalization of markets in bodily services and parts. The book explores the risks associated with metaphors of property and the reasons why the commodification of the body remains problematic. The book asks what is wrong with thinking of oneself as the owner of one's body? What is wrong with making our bodies available for rent or sale? What, if anything, is the difference between markets in sex, reproduction, or human body parts, and the other markets we commonly applaud? The book contends that body markets occupy the outer edges of a continuum that is, in some way, a feature of all labor markets. But it also emphasizes that we all have bodies, and considers the implications of this otherwise banal fact for equality. Bodies remind us of shared vulnerability, alerting us to the common experience of living as embodied beings in the same world. Examining the complex issue of body exceptionalism, the book demonstrates that treating the body as property makes human equality harder to comprehend.

Theory-Practice Gap: The Experiences of Nigerian Nursing Students

2018 ◽  
Vol 20 (1) ◽  
Author(s):  
Titilayo Dorothy Odetola ◽  
Olusola Oluwasola ◽  
Christoph Pimmer ◽  
Oluwafemi Dipeolu ◽  
Samson Oluwayemi Akande ◽  
...  
Keyword(s):  
Clinical Practice ◽  
Nursing Students ◽  
Developing Country ◽  
The Body ◽  
Clinical Staff ◽  
Clinical Settings ◽  
Practice Gap ◽  
The Difference ◽  
Analyse Data ◽  
Theory Practice Gap

The “disconnect” between the body of knowledge acquired in classroom settings and the application of this knowledge in clinical practice is one of the main reasons for professional fear, anxiety and feelings of incompetence among freshly graduated nurses. While the phenomenon of the theory-to-practice gap has been researched quite extensively in high-income country settings much less is known about nursing students’ experiences in a developing country context. To rectify this shortcoming, the qualitative study investigated the experiences of nursing students in their attempt to apply what they learn in classrooms in clinical learning contexts in seven sites in Nigeria. Thematic content analysis was used to analyse data gained from eight focus group discussions (n = 80) with the students. The findings reveal a multifaceted theory-practice gap which plays out along four tensions: (1) procedural, i.e. the difference between practices from education institutions and the ones enacted in clinical wards – and contradictions that emerge even within one clinical setting; (2) political, i.e. conflicts that arise between students and clinical staff, especially personnel with a lower qualification profile than the degree that students pursue; (3) material, i.e. the disconnect between contemporary instruments and equipment available in schools and the lack thereof in clinical settings; and (4) temporal, i.e. restricted opportunities for supervised practice owing to time constraints in clinical settings in which education tends to be undervalued. Many of these aspects are linked to and aggravated by infrastructural limitations, which are typical for the setting of a developing country. Nursing students need to be prepared regarding how to deal with the identified procedural, political, material and temporal tensions before and while being immersed in clinical practice, and, in so doing, they need to be supported by educationally better qualified clinical staff.

Perbedaan Penggunaan Antikoagulan K2EDTA DAN K3EDTA Terhadap Hasil Pemeriksaan Indeks Eritrosit

2018 ◽  
Vol 1 (2) ◽  
pp. 114
Author(s):  
Wahdaniah Wahdaniah ◽  
Sri Tumpuk
Keyword(s):  
Screening Test ◽  
Venous Blood ◽  
The Body ◽  
Ethylene Diamine ◽  
P Value ◽  
Cross Sectional ◽  
Significant Difference ◽  
Ethylene Diamine Tetra Acetate ◽  
The Difference ◽  
Index Value

Abstract: Routine blood examination is the earliest blood test or screening test to determine the diagnosis of an abnormality. Blood easily froze if it is outside the body and can be prevented by the addition of anticoagulants, one of which Ethylene Diamine Tetra Acetate (EDTA). Currently available vacuum tubes containing EDTA anticoagulants in the form of K2EDTA and K3EDTA. K3EDTA is usually a salt that has better stability than other EDTA salts because it shows a pH approaching a blood pH of about 6.4. The purpose of this research is to know the difference of erythrocyte index results include MCH, MCV and MCHC using K3EDTA anticoagulant with K2EDTA. This research is a cross sectional design. This study used venous blood samples mixed with K2EDTA anticoagulant and venous blood mixed with K3EDTA anticoagulants, each of 30 samples. Data were collected and analyzed using paired different test. Based on data analysis that has been done on MCH examination, p value <0,05 then there is a significant difference between samples with K3EDTA anticoagulant with K2EDTA to erythrocyte index value. Then on the examination of MCV and MCHC obtained p value <0.05 then there is no significant difference between samples with K3EDTA anticoagulant with K2EDTA to erythrocyte index value.Abstrak: Pemeriksaan darah rutin merupakan pemeriksaan darah yang paling awal atau screening test untuk mengetahui diagnosis suatu kelainan. Darah mudah membeku jika berada diluar tubuh dan bisa dicegah dengan penambahan antikoagulan, salah satunya Ethylene Diamine Tetra Acetate (EDTA). Dewasa ini telah tersedia tabung vakum yang sudah berisi antikoagulan EDTA dalam bentuk  K2EDTA dan  K3EDTA. K3EDTA  biasanya berupa garam yang mempunyai stabilitas yang lebih baik dari garam EDTA yang lain karena menunjukkan pH yang mendekati pH darah yaitu sekitar 6,4. Tujuan dari penelitian ini adalah untuk mengetahui perbedaan hasil indeks eritrosit meliputi MCH, MCV dan MCHC menggunakan antikoagulan K3EDTA dengan K2EDTA. Penelitian ini merupakan penelitian dengan desain cross sectional. Penelitian ini menggunakan sampel darah vena yang dicampur dengan antikoagulan K2EDTA dan darah vena yang dicampur dengan antikoagulan K3EDTA, masing-masing sebanyak 30 sampel. Data dikumpulkan dan dianalisis menggunakan uji beda berpasangan. Berdasarkan analisis data yang telah dilakukan pada pemeriksaan MCH didapatkan nilai p < 0,05 maka ada perbedaan yang signifikan antara sampel dengan antikoagulan K3EDTA dengan K2EDTA terhadap nilai indeks eritrosit. Kemudian pada pemeriksaan MCV dan MCHC didapatkan nilai p < 0,05 maka tidak ada perbedaan yang signifikan antara sampel dengan antikoagulan K3EDTA dengan K2EDTA terhadap nilai indeks eritrosit.

Effect of Sample Storage Conditions on Body Burden Analysis of Organic Contaminants in Unionid Mussels

1992 ◽  
Vol 27 (4) ◽  
pp. 833-844 ◽  
Author(s):  
Micheline Hanna
Keyword(s):  
Organic Contaminants ◽  
Body Burden ◽  
Storage Conditions ◽  
The Body ◽  
Sample Storage ◽  
Pcb Congeners ◽  
Unionid Mussels ◽  
Group A ◽  
The Difference ◽  
Group B

Abstract In order to quantitatively assess the effect of sample storage conditions on the body burden analysis of organic contaminants, a comparative analysis was carried out on the unionid mussel Elliptic complanata. The mussels were divided into two groups, each with distinct storage conditions, while Group A was kept in the freezer at −20°C, Group B was kept in the refrigerator for five days at 5°C. All the compounds present in the control were also present in Group B samples. Analysis of the organic contaminants in each of these two groups showed that for total PCB concentrations, the two treatments were not significantly different; however when compared individually 6 of the 13 PCB congeners showed significant differences. The observed differences were relatively small for individual PCB congeners (7.1 to 15.3%), higher for chlorobenzenes (10.5 to 36.4%), and yet higher for HCE (44.1%); the difference for HCE, although large is nevertheless not significant, even if only marginally so.

scholarly journals The Respiration of some Planktonic copepods II. The Effect Of Temperature

1953 ◽  
Vol 31 (3) ◽  
pp. 447-460 ◽  
Author(s):  
D. T. Gauld ◽  
J. E. G. Raymont
Keyword(s):  
Respiratory Rate ◽  
The Body ◽  
The Other ◽  
Effect Of Temperature ◽  
Acartia Clausi ◽  
Temora Longicornis ◽  
Different Temperatures ◽  
Planktonic Copepods ◽  
The Difference ◽  
The Relationship

The respiratory rates of three species of planktonic copepods, Acartia clausi, Centropages hamatus and Temora longicornis, were measured at four different temperatures.The relationship between respiratory rate and temperature was found to be similar to that previously found for Calanus, although the slope of the curves differed in the different species.The observations on Centropages at 13 and 170 C. can be divided into two groups and it is suggested that the differences are due to the use of copepods from two different generations.The relationship between the respiratory rates and lengths of Acartia and Centropages agreed very well with that previously found for other species. That for Temora was rather different: the difference is probably due to the distinct difference in the shape of the body of Temora from those of the other species.The application of these measurements to estimates of the food requirements of the copepods is discussed.

scholarly journals Changes in Children’s Body Composition and Posture during Puberty Growth

Children ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 288
Author(s):  
Wojciech Rusek ◽  
Joanna Baran ◽  
Justyna Leszczak ◽  
Marzena Adamczyk ◽  
Rafał Baran ◽  
...  
Keyword(s):  
Body Composition ◽  
Adipose Tissue ◽  
Regression Analysis ◽  
Body Mass ◽  
Pelvic Obliquity ◽  
The Body ◽  
Body Posture ◽  
Older Children ◽  
The Difference ◽  
The Right

The main goal of our study was to determine how the age of children, puberty and anthropometric parameters affect the formation of body composition and faulty body posture development in children. The secondary goal was to determine in which body segments abnormalities most often occur and how gender differentiates the occurrence of adverse changes in children’s body posture and body composition during puberty. The study group consisted of 464 schoolchildren aged from 6–16. Body posture was assessed with the Zebris system. The composition of the body mass was tested with Tanita MC 780 MA body mass analyzer and the body height was measured using a portable stadiometer PORTSTAND 210. The participants were further divided due to the age of puberty. Tanner division was adopted. The cut-off age for girls is ≥10 years and for boys it is ≥12 years. The analyses applied descriptive statistics, the Pearson correlation, stepwise regression analysis and the t-test. The accepted level of significance was p < 0.05. The pelvic obliquity was lower in older children (beta = −0.15). We also see that age played a significant role in the difference in the height of the right pelvis (beta = −0.28), and the difference in the height of the right shoulder (beta = 0.23). Regression analysis showed that the content of adipose tissue (FAT%) increased with body mass index (BMI) and decreased with increasing weight, age, and height. Moreover, the FAT% was lower in boys than in girls (beta negative equal to −0.39). It turned out that older children (puberty), had greater asymmetry in the right shoulder blade (p < 0.001) and right shoulder (p = 0.003). On the other hand, younger children (who were still before puberty) had greater anomalies in the left trunk inclination (p = 0.048) as well as in the pelvic obliquity (p = 0.008). Girls in puberty were characterized by greater asymmetry on the right side, including the shoulders (p = 0.001), the scapula (p = 0.001) and the pelvis (p < 0.001). In boys, the problem related only to the asymmetry of the shoulder blades (p < 0.001). Girls were characterized by a greater increase in adipose tissue and boys by muscle tissue. Significant differences also appeared in the body posture of the examined children. Greater asymmetry within scapulas and shoulders were seen in children during puberty. Therefore, a growing child should be closely monitored to protect them from the adverse consequences of poor posture or excessive accumulation of adipose tissue in the body.

Kinematic Analysis of Olympic Hurdle Performance: Women's 100 Meters

1985 ◽  
Vol 1 (2) ◽  
pp. 163-173 ◽  
Author(s):  
Ralph Mann ◽  
John Herman
Keyword(s):  
Elite Athlete ◽  
Olympic Games ◽  
Lower Leg ◽  
The Body ◽  
Performance Variables ◽  
Body Velocity ◽  
The Difference ◽  
Foot Position ◽  
Support Time ◽  
Leg Position

Selected kinematic variables in the performance of the Gold and Silver medalists and the eighth-place finisher in the women's 100-meter hurdles final at the 1984 Summer Olympic Games were investigated. Cinematographic records were obtained for all track hurdling events at the Games, with the 100-meter hurdle performers singled out for initial analysis. In this race, sagittal view filming records (100 fps) were collected at the 9th hurdle of the performance. Computer generated analysis variables included both direct performance variables (body velocity, support time, etc.) and body kinematics (upper leg position, lower leg velocity, etc.) that have previously been utilized in the analysis of elite athlete hurdlers. The difference in place finish was related to the performance variables body horizontal velocity (direct), vertical velocity (indirect), and support time (indirect). The critical body kinematics variables related to success included upper and lower leg velocity during support into and off the hurdle (direct), relative horizontal foot position (to the body) at touchdown into and off the hurdle (indirect), and relative horizontal foot velocity (to the body) at touchdown into the hurdle.

Sign in / Sign up

Export Citation Format

Share Document