scholarly journals Gene-expression programming to predict scour at a bridge abutment

2011 ◽  
Vol 14 (2) ◽  
pp. 324-331 ◽  
Author(s):  
H. Md. Azamathulla
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Gene Expression Programming ◽  
Accurate Estimation ◽  
Scour Depth ◽  
Laboratory Measurements ◽  
Ann Modeling ◽  
Bridge Abutment ◽  
Alternative Approach ◽  
Artificial Neural Network Ann

The process involved in the local scour at an abutment is so complex that it makes it difficult to establish a general empirical model to provide accurate estimation for scour. This study presents the use of gene-expression programming (GEP), which is an extension of genetic programming (GP), as an alternative approach to estimate the scour depth. The datasets of laboratory measurements were collected from the published literature and used to train the network or evolve the program. The developed network and evolved programs were validated by using the observations that were not involved in training. The proposed GEP approach gives satisfactory results compared with existing predictors and artificial neural network (ANN) modeling in predicting the scour depth at an abutment.

scholarly journals Compressive Strength Prediction via Gene Expression Programming (GEP) and Artificial Neural Network (ANN) for Concrete Containing RCA

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 324
Author(s):  
Ayaz Ahmad ◽  
Krisada Chaiyasarn ◽  
Furqan Farooq ◽  
Waqas Ahmad ◽  
Suniti Suparp ◽  
...  
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Artificial Neural Network ◽  
Compressive Strength ◽  
Mean Square Error ◽  
Gene Expression Programming ◽  
Mix Design ◽  
Mean Square ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

To minimize the environmental risks and for sustainable development, the utilization of recycled aggregate (RA) is gaining popularity all over the world. The use of recycled coarse aggregate (RCA) in concrete is an effective way to minimize environmental pollution. RCA does not gain more attraction because of the availability of adhered mortar on its surface, which poses a harmful effect on the properties of concrete. However, a suitable mix design for RCA enables it to reach the targeted strength and be applicable for a wide range of construction projects. The targeted strength achievement from the proposed mix design at a laboratory is also a time-consuming task, which may cause a delay in the construction work. To overcome this flaw, the application of supervised machine learning (ML) algorithms, gene expression programming (GEP), and artificial neural network (ANN) was employed in this study to predict the compressive strength of RCA-based concrete. The linear coefficient correlation (R2), mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were evaluated to investigate the performance of the models. The k-fold cross-validation method was also adopted for the confirmation of the model’s performance. In comparison, the GEP model was more effective in terms of prediction by giving a higher correlation (R2) value of 0.95 as compared to ANN, which gave a value of R2 equal to 0.92. In addition, a sensitivity analysis was conducted to know about the contribution level of each parameter used to run the models. Moreover, the increment in data points and the use of other supervised ML approaches like boosting, gradient boosting, and bagging to forecast the compressive strength, would give a better response.

scholarly journals Application of Gene Expression Programming, Artificial Neural Network and Multilinear Regression in Predicting Hydrochar Physicochemical Properties

2020 ◽  
Author(s):  
Jibril Abdulsalam ◽  
Abiodun Ismail Lawal ◽  
Ramadimetja Lizah Setsepu ◽  
Moshood Onifade ◽  
Samson Bada
Keyword(s):  
Neural Network ◽  
Gene Expression ◽  
Artificial Neural Network ◽  
Performance Metrics ◽  
Gene Expression Programming ◽  
Mean Bias Error ◽  
Energy Yield ◽  
Multilinear Regression ◽  
Soft Computing Techniques ◽  
Artificial Neural

Abstract Globally, the provision of energy is becoming an absolute necessity. Biomass resources are abundant and have been described as a potential alternative source of energy. However, it is important to assess the fuel characteristics of the various available biomass sources. Soft computing techniques are presented in this study to predict the mass yield (MY), energy yield (EY), and higher heating value (HHV) of hydrothermally carbonized biomass by using Gene Expression Programming (GEP), multiple-input single output-artificial neural network (MISO-ANN), and Multilinear regression (MLR). The three techniques were compared using statistical performance metrics. The coefficient of determination (R2), mean absolute error (MAE), and mean bias error (MBE) were used to evaluate the performance of the models. The MISO-ANN with 5-10-10-1 and 5-15-15-1 network architectures provided the most satisfactory performance of the three proposed models (R2 = 0.976, 0.955, 0.996; MAE = 2.24, 2.11, 0.93; MBE = 0.16, 0.37, 0.12) for MY, EY and HHV respectively. The GEP technique’s ability to predict hydrochar properties based on the input parameters was found to be satisfactory, while MLR provided an unsatisfactory predictive model. Sensitivity analysis was conducted, and the analysis revealed that volatile matter (VM) and temperature (Temp) have more influence on the MY, EY, and HHV.

scholarly journals Practical Risk Assessment of Ground Vibrations Resulting from Blasting, Using Gene Expression Programming and Monte Carlo Simulation Techniques

2020 ◽  
Vol 10 (2) ◽  
pp. 472 ◽  
Author(s):  
Amir Mahdiyar ◽  
Danial Jahed Armaghani ◽  
Mohammadreza Koopialipoor ◽  
Ahmadreza Hedayat ◽  
Arham Abdullah ◽  
...  
Keyword(s):  
Gene Expression ◽  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Gene Expression Programming ◽  
Sensitivity Analyses ◽  
Accurate Estimation ◽  
Blasting Operation ◽  
Simulation Techniques ◽  
Input Variables ◽  
The Impact

Peak particle velocity (PPV) is a critical parameter for the evaluation of the impact of blasting operations on nearby structures and buildings. Accurate estimation of the amount of PPV resulting from a blasting operation and its comparison with the allowable ranges is an integral part of blasting design. In this study, four quarry sites in Malaysia were considered, and the PPV was simulated using gene expression programming (GEP) and Monte Carlo simulation techniques. Data from 149 blasting operations were gathered, and as a result of this study, a PPV predictive model was developed using GEP to be used in the simulation. In order to ensure that all of the combinations of input variables were considered, 10,000 iterations were performed, considering the correlations among the input variables. The simulation results demonstrate that the minimum and maximum PPV amounts were 1.13 mm/s and 34.58 mm/s, respectively. Two types of sensitivity analyses were performed to determine the sensitivity of the PPV results based on the effective variables. In addition, this study proposes a method specific to the four case studies, and presents an approach which could be readily applied to similar applications with different conditions.

scholarly journals Artificial Neural Network (ANN) Modeling for Prediction of Pesticide Wastewater Degradation by FeGAC/H2O2 Process

2018 ◽  
Vol 65 ◽  
pp. 05004
Author(s):  
Augustine Chioma Affam ◽  
Malay Chaudhuri ◽  
Chee Chung Wong ◽  
Chee Swee Wong
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Close Agreement ◽  
Transfer Functions ◽  
Cod Removal ◽  
Experimental Results ◽  
Ann Model ◽  
Ann Modeling ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The study examined artificial neural network (ANN) modeling for the prediction of chlorpyrifos, cypermethrin and chlorothalonil pesticides degradation by the FeGAC/H2O2 process. The operating condition was the optimum condition from a series of experiments. Under these conditions; FeGAC 5 g/L, H2O2 concentration 100 mg/L, pH 3 and 60 min reaction time, the COD removal obtained was 96.19%. The ANN model was developed using a three-layer multilayer perceptron (MLP) neural network to predict pesticide degradation in terms of COD removal. The configuration of the model with the smallest mean square error (MSE) of 0.000046 contained 5 inputs, 9 hidden and, 1 output neuron. The Levenberg–Marquardt backpropagation training algorithm was used for training the network, while tangent sigmoid and linear transfer functions were used at the hidden and output neurons, respectively. The predicted results were in close agreement with the experimental results with correlation coefficient (R2) of 0.9994 i.e. 99.94% showing a close agreement to the actual experimental results. The sensitivity analysis showed that FeGAC dose had the highest influence with relative importance of 25.33%. The results show how robust the ANN model could be in the prediction of the behavior of the FeGAC/H2O2 process.

Sign in / Sign up

Export Citation Format

Share Document