scholarly journals Numerical simulation of the near-wake flow field of a horizontal-axis wind turbine (HAWT) model

2016 ◽  
Vol 18 (5) ◽  
pp. 3258-3268
Author(s):  
Hong-lei Ding ◽  
Dan-mei Hu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Wind Turbine ◽  
Horizontal Axis ◽  
Wake Flow ◽  
Horizontal Axis Wind Turbine ◽  
Near Wake

PIV Experiment on Near Wake Flow of Horizontal Axis Wind Turbine

2013 ◽  
Vol 718-720 ◽  
pp. 1811-1815 ◽  
Author(s):  
Xiang Gao ◽  
Jun Hu ◽  
Zhi Qiang Wang
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Radial Direction ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Tip Vortex ◽  
Wake Flow ◽  
Horizontal Axis Wind Turbine ◽  
Near Wake ◽  
Piv Measurement

A three-dimensional horizontal axis wind turbine model was experimentally studied. The experiment was carried out in a laboratory wind tunnel. With PIV measurement, details about flow fields in the near wakeof the turbine blade were obtained. The result shows vortices generateon the tailing edge of the blade, and propagatedownstream then dissipate into small vortices. Vortices also generate at the tip of the blade, propagate downstream and along the radial direction then dissipate. The dissipation of the tip vortex is slower than the former. We also find that the wake of turbine blade rotates in the opposite direction of the blade.

Small Horizontal Axis Wind Turbine: Analytical Blade Design and Comparison With RANS-Prediction and First Experimental Data

2013 ◽  
Author(s):  
Tom Gerhard ◽  
Michael Sturm ◽  
Thomas H. Carolus
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Wind Turbine ◽  
Horizontal Axis ◽  
Analytical Models ◽  
Power Coefficient ◽  
Analysis Tool ◽  
Computational Domain ◽  
Horizontal Axis Wind Turbine ◽  
Data Set

State-of-the-art wind turbine performance prediction is mainly based on semi-analytical models, incorporating blade element momentum (BEM) analysis and empirical models. Full numerical simulation methods can yield the performance of a wind turbine without empirical assumptions. Inherent difficulties are the large computational domain required to capture all effects of the unbounded ambient flow field and the fact that the boundary layer on the blade may be transitional. A modified turbine design method in terms of the velocity triangles, Euler’s turbine equation and BEM is developed. Lift and drag coefficients are obtained from XFOIL, an open source 2D design and analysis tool for subcritical airfoils. A 3 m diameter horizontal axis wind turbine rotor was designed and manufactured. The flow field is predicted by means of a Reynolds-averaged Navier-Stokes simulation. Two turbulence models were utilized: (i) a standard k-ω-SST model, (ii) a laminar/turbulent transition model. The manufactured turbine is placed on the rooftop of the University of Siegen. Three wind anemometers and wind direction sensors are arranged around the turbine. The torque is derived from electric power and the rotational speed via a calibrated grid-connected generator. The agreement between the analytically and CFD-predicted kinematic quantities up- and downstream of the rotor disc is quite satisfactory. However, the blade section drag to lift ratio and hence the power coefficient vary with the turbulence model chosen. Moreover, the experimentally determined power coefficient is considerably lower as predicted by all methods. However, this conclusion is somewhat preliminary since the existing experimental data set needs to be extended.

Experimental Investigation on the Tip Vortex of a Wind Turbine With and Without a Slotted Tip

2017 ◽  
Author(s):  
Pengyin Liu ◽  
Jinge Chen ◽  
Shen Xin ◽  
Xiaocheng Zhu ◽  
Zhaohui Du
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Wind Turbine ◽  
Vortex Core ◽  
Control Method ◽  
Tip Vortex ◽  
Wake Flow ◽  
Core Model ◽  
Near Wake ◽  
Measured Velocity

In this paper, a slotted tip structure is experimentally analyzed. A wind turbine with three blades, of which the radius is 301.74mm, is investigated by the PIV method. Each wind turbine blade is formed with a slots system comprising four internal tube members embedded in the blade. The inlets of the internal tube member are located at the leading edge of the blade and form an inlet array. The outlets are located at the blade tip face and form an outlet array. The near wake flow field of the wind turbine with slotted tip and without slotted tip are both measured. Velocity field of near wake region and clear images of the tip vortex are captured under different wake ages. The experimental results show that the radius of the tip vortex core is enlarged by the slotted tip at any wake age compared with that of original wind turbine. Moreover, the diffusion process of the tip vortex is accelerated by the slotted tip which lead to the disappearance of the tip vortex occurs at smaller wake age. The strength of the tip vortex is also reduced indicating that the flow field in the near wake of wind turbine is improved. The experimental data are further analyzed with the vortex core model to reveal the flow mechanism of this kind of flow control method. The turbulence coefficient of the vortex core model for wind turbine is obtained from the experimental data of the wind turbine with and without slotted tip. It shows that the slotted tip increases the turbulence strength in the tip vortex core by importing airflow into the tip vortex core during its initial generation stage, which leads to the reduction of the tip vortex strength. Therefore, it is promising that the slotted tip can be used to weaken the vorticity and accelerate the diffusion of the tip vortex which would improve the problem caused by the tip vortex.

Visualization of the flow field and aerodynamic force on a Horizontal Axis Wind Turbine in turbulent inflows

Energy ◽  
2016 ◽  
Vol 111 ◽  
pp. 57-67 ◽  
Author(s):  
Qing'an Li ◽  
Yasunari Kamada ◽  
Takao Maeda ◽  
Junsuke Murata ◽  
Yusuke Nishida
Keyword(s):  
Flow Field ◽  
Wind Turbine ◽  
Aerodynamic Force ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine
Sign in / Sign up

Export Citation Format

Share Document