scholarly journals Succession pattern of invertebrates on an unburied corpse of a cat suffering from cancer: A case study

2020 ◽  
Vol 76 (03) ◽  
pp. 6366-2020
Author(s):  
KATARZYNA CZEPIEL-MIL ◽  
ROBERT STRYJECKI ◽  
PIOTR LISTOS ◽  
DANUTA KOWALCZYK-PECKA ◽  
KAMIL WYDRA ◽  
...  
Keyword(s):  
Life Cycle ◽  
Forensic Entomology ◽  
Calliphora Vicina ◽  
Second Phase ◽  
Time Of Death ◽  
The Third ◽  
Third Phase ◽  
First Instar ◽  
The Family

Forensic entomology frequently assists forensic medicine in legal investigations. It makes it possible to estimate the time of death when a cadaver is recovered at a relatively advanced stage of decomposition. In criminalistics practice, unburied bodies are found the most commonly, and therefore the fauna of these cadavers is the best investigated. The aim of this study was to collect a succession of insects and other invertebrates occurring on an unburied corpse. The experiment was conducted on the carcass of a cat euthanized due to an advanced cancer process. The carcass was colonized by three phyla of animals: Annelidae, Mollusca, and Arthropoda. They belonged to 7 classes and 10 orders. The most diverse were Arthropoda. They were classified into 5 classes: Insecta, Diplopoda, Malacostraca, Entognata, and Arachnida, and into 8 orders: Julida, Isopoda, Collembola, Diptera, Coleoptera, Hemiptera, Araneae, and Acari. The fly species Calliphora vicina from the family Calliphoridae is of particular interest among the insects collected because it is one of the fundamental indicator species whose life cycle makes it possible to determine an approximate time of death. During the study it was noted that arthropods occurred in a certain pattern of succession, predictable in forensic entomology. The first group was Calliphora vicina (Calliphoridae, Diptera), which laid eggs. The next (second) group consisted of first-instar C. vicina larvae and insects feeding on these larvae, such as Philonthus tenuicornis (Staphylinidae, Coleoptera). The first stage of succession was the appearance of eggs of C. vicina. The second phase was the appearance of adult flies other than Calliphoridae and of accidental species, as well as beetles (e.g. Philonthus tenuicornis, Staphylinidae, Coleoptera) feeding on larvae of C. vicina. The third phase of succession was the appearance of all larvae stages of C. vicina that continued and finished their life cycle.

The 3D IFB SWOT Analysis as a Strategic Tool to Develop Entrepreneurial Plans for Family Businesses

2020 ◽  
pp. 363-389
Author(s):  
Luz Leyda Vega-Rosado
Keyword(s):  
Family Business ◽  
Swot Analysis ◽  
Three Dimensional ◽  
Family Firm ◽  
Second Phase ◽  
The Third ◽  
Third Phase ◽  
The Family ◽  
Generational Groups ◽  
The Individual

This chapter provides a framework that family business members can use to strategically and entrepreneurially evaluate themselves before they prepare the final strategic plan of the family firm. The tool consists of four phases. The first phase is the Strengths-Weaknesses-Opportunities-Threats (SWOT) analysis of the Individuals that are members of the family business. The second phase is the SWOT analysis of the Family's generational groups. Each generation in the family business will work in groups according to their year of birth. The third phase is the SWOT analysis of the Business. The fourth and most important phase is the integration called 3D IFB SWOT Analysis. It is 3D because it is three-dimensional, integrating the Individual, the Family's generations, and the Business.

Modelling Business Processes

2011 ◽  
pp. 45-71
Author(s):  
Victor Portougal
Keyword(s):  
Life Cycle ◽  
Business Process ◽  
Process Management ◽  
Business Processes ◽  
Process Modelling ◽  
Second Phase ◽  
The Third ◽  
Third Phase ◽  
Execution Phase ◽  
Monitoring Phase

The modelling of business processes is vital not only for business processmanagement, but also for implementation of enterprise systems. For example,when we look at the process life cycle introduced earlier, three of the sevenphases involve business process modelling, to a large extent. But apart fromthat, the models that are generated in these three phases are used in all the sevenphases of the business process management life cycle. The phases where thesemodels are developed are in the second phase of process modelling; and it isused in the third phase, where we do the analysis; and is used in the fourth phase,where we improve upon the as-is models, come up with the to-be models, andmodel them, using whatever tools that are available. But then, the to-be modelsthat are developed in the fourth phase are used in the process implementationphase, in the execution phase, in the monitoring phase, and even in the processidentification phase, when you think of it as a life cycle.

The 3D IFB SWOT Analysis as a Strategic Tool to Develop Entrepreneurial Plans for Family Businesses

2022 ◽  
pp. 268-294
Author(s):  
Luz Leyda Vega-Rosado
Keyword(s):  
Family Business ◽  
Swot Analysis ◽  
Three Dimensional ◽  
Family Firm ◽  
Second Phase ◽  
The Third ◽  
Third Phase ◽  
The Family ◽  
Generational Groups ◽  
The Individual

This chapter provides a framework that family business members can use to strategically and entrepreneurially evaluate themselves before they prepare the final strategic plan of the family firm. The tool consists of four phases. The first phase is the Strengths-Weaknesses-Opportunities-Threats (SWOT) analysis of the Individuals that are members of the family business. The second phase is the SWOT analysis of the Family's generational groups. Each generation in the family business will work in groups according to their year of birth. The third phase is the SWOT analysis of the Business. The fourth and most important phase is the integration called 3D IFB SWOT Analysis. It is 3D because it is three-dimensional, integrating the Individual, the Family's generations, and the Business.

Developing a Method for the Design of Sharable Pedagogical Scenarios

2011 ◽  
pp. 86-101 ◽  
Author(s):  
Marcelo Maina
Keyword(s):  
Instructional Design ◽  
Design Method ◽  
Lessons Learned ◽  
Modeling Language ◽  
Second Phase ◽  
Design And Development Research ◽  
The Third ◽  
Third Phase ◽  
Development And Validation

This chapter presents a research that adopted the Design and Development Research (DDR) approach for the development and validation of a theoretically-grounded and pedagogically-inclusive instructional design method aimed at the creation of reusable and interoperable pedagogical scenarios. The first phase grounds the research in a theory of instructional design that aligns with other related design disciplines, and decomposes the design problem into layers of artifact functionalities. This theory corresponds to software-engineering-infused instructional design methods also known as courseware engineering. The second phase explores ways to integrate an educational modeling language within an instructional design method for enabling the representation of pedagogical scenarios of computational facture. The third phase presents an initial developmental solution, which is tested in a case study. The fourth and final phase extends the development and validation of a solution by way of a two-round Delphi method. Each phase is followed by reflections on the lessons learned during the DDR process.

scholarly journals Using Life Cycle Assessment Method for Selecting Optimal Waste Management System in Tehran City

2019 ◽  
Author(s):  
Fahimeh Rahimi ◽  
Farideh Atabi ◽  
Jafar Nouri ◽  
GhasemAli Omrani
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Waste Management ◽  
Assessment Method ◽  
Phase Iii ◽  
Current Status ◽  
Second Phase ◽  
The Third ◽  
Third Phase

Introduction: In Tehran with a population of 9 million currently, about 2.5 million tons municipal solid waste have been producing annually. Materials and Models: In this study by using Life Cycle Assessment (LCA) model an optimal system of waste management of Tehran was recommended. Based on the quantity and quality of waste in Tehran in 2013 and facilities, three scenarios were selected. First, current status (15% compost, 5% recycling and 80% landfill), second, the maximum use of the capabilities of waste of Tehran (70% compost, 20% recycled and 10% landfill ) and third, the optimal scenario according to conditions of Tehran (55% compost, 10% recycling, 5% energy recovery and 30% landfill). The IWM model and WRATE model was used for Phase II and Phase III, respectively. Results: Results of the conducting second Phase showed in compared to the first scenario by the second and third scenario, the amount of emissions was decreased 64% and 72%, respectively. The third phase results showed the third scenario has the lowest environmental impact in chosen six impact groups. Conclusion: Considering the quality and quantity of wastes in Tehran and also the current facilities, conducting the third scenario could be useful for reducing emissions, the external costs and environmental impacts.

Quantitative Evaluation of Risks from Crude-by-Rail Spills: A Case Study using the Proposed Shell Puget Sound Refinery Anacortes Rail Unloading Facility

2017 ◽  
Vol 2017 (1) ◽  
pp. 2057-2077
Author(s):  
Matthew Horn ◽  
Dagmar Schmidt Etkin ◽  
Andrew Wolford
Keyword(s):  
Puget Sound ◽  
Second Phase ◽  
Probability Assessment ◽  
Acute Effects ◽  
The Third ◽  
Third Phase ◽  
Vapor Cloud ◽  
Accident Data ◽  
Fire And Explosion

ABSTRACT Abstract ID: 2017-143 – Industry considerations, regulatory recommendations, and public concerns have necessitated a quantitative approach to addressing the risks associated with crude-by-rail shipments. Risk is defined as the product of the probability of an event occurring and the potential consequences that may result. To adequately address both the probability and consequence sides of risk, a three-phased approach was developed for use. First, a probability assessment used historical freight rail accident data to calculate the probability of an accident occurring with adjustments specific to crude-by-rail transport, the likelihood that an accident involving a crude-by-rail unit train would result in the release of oil, and the potential size of that release. These results were then used as inputs to a consequence assessment. This necessitated an assumption that a spill had taken place and there either was or was not an ignition source nearby. In the second phase, two computational oil spill models (OILMAP Land and SIMAP) were used to determine the trajectory, fate, and effects of released oil onto land and into water. This analysis included determining where oil may be transported within the environment, how long it would take to get there, how it would weather and behave, what resources of interest may potentially be affected, and what the potential acute effects may be to specific biological receptors. The third phase included a fire and explosion analysis, which was used to determine the thermal radiation from pool fires and the overpressure from a vapor cloud explosion and boiling liquid expanding vapor explosion (BLEVE). This assessment was used to quantitatively discuss both the probability and consequence sides of the risk associated with the proposed Shell Puget Sound Refinery Anacortes Rail Unloading Facility and was included in the Environmental Impact Statement (EIS) addressing Environmental Health and Risk.

PENERAPAN MODEL QUANTUM LEARNING UNTUK MENINGKATKAN HASIL BELAJAR AUTOCAD SISWA KELAS X TEKNIK PEMESINAN SMK NEGERI 1 STABAT

2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Abdul Hasan Saragih
Keyword(s):  
Positive Response ◽  
Phase 1 ◽  
First Grade ◽  
Learning Model ◽  
Second Phase ◽  
Phase 2 ◽  
Phase 3 ◽  
The Third ◽  
Third Phase ◽  
Quantum Learning

This classroom research was conducted on the autocad instructions to the first grade of mechinary class of SMK Negeri 1 Stabat aiming at : (1) improving the student’ archievementon autocad instructional to the student of mechinary architecture class of SMK Negeri 1 Stabat, (2) applying Quantum Learning Model to the students of mechinary class of SMK Negeri 1 Stabat, arising the positive response to autocad subject by applying Quantum Learning Model of the students of mechinary class of SMK Negeri 1 Stabat. The result shows that (1) by applying quantum learning model, the students’ achievement improves significantly. The improvement ofthe achievement of the 34 students is very satisfactory; on the first phase, 27 students passed (70.59%), 10 students failed (29.41%). On the second phase 27 students (79.41%) passed and 7 students (20.59%) failed. On the third phase 30 students (88.24%) passed and 4 students (11.76%) failed. The application of quantum learning model in SMK Negeri 1 Stabat proved satisfying. This was visible from the activeness of the students from phase 1 to 3. The activeness average of the students was 74.31% on phase 1,81.35% on phase 2, and 83.63% on phase 3. (3) The application of the quantum learning model on teaching autocad was very positively welcome by the students of mechinary class of SMK Negeri 1 Stabat. On phase 1 the improvement was 81.53% . It improved to 86.15% on phase 3. Therefore, The improvement ofstudent’ response can be categorized good.

Mixed-Methods Evaluation as Scaffold to the Development of a Mobile Health Application to Support the Prescription of Wheelchairs and Postural Support Devices (Preprint)

2020 ◽  
Author(s):  
Adriana Klein ◽  
Roseli de Deus Lopes ◽  
Rodrigo Suigh
Keyword(s):  
Mixed Methods ◽  
Mobile Health ◽  
Second Phase ◽  
The Third ◽  
Evaluation Approach ◽  
Mixed Methods Evaluation ◽  
Usability Tests ◽  
Third Phase ◽  
Postural Support ◽  
Support Devices

BACKGROUND EasySeating is a mobile health (mHealth) app that supports the prescription of wheelchair and postural support devices (WPSD). It can be used by occupational therapists (OT) and physiotherapists (PT) who prescribe WPSD. The app offers a standardization of the prescription procedure, showing images, metrics and details that guide the prescriber to decide on the best equipment. It was developed with an iterative mixed-methods evaluation approach. Objective: The aim of this study was to investigate the processes involved in the prescription of WPSD and to propose, develop and evaluate a mHealth to support OT and PT prescribers. OBJECTIVE The aim of this study was to investigate the processes involved in the prescription of WPSD and to propose, develop and evaluate a mHealth to support OT and PT prescribers. METHODS This study was divided into three phases and was carried out as an iterative process composed of user consulting/testing (using a mixed-methods evaluation approach), system (re)design and software development. The first phase consisted of the collection of qualitative and quantitative data to map and understand the users requirements and of the development of the first prototype (v1) of the app. This data collection was performed through semi-structured interviews with 14 OT and PT prescribers, 5 specialized technicians and 5 WPSD users. The second phase aimed at improving the overall functionality of the app and consisted in the development, test and evaluation of the prototypes v1, v2, v3 and v4. A total of 59 prescribers tested and evaluated these prototypes by means of open interviews, semi-structured questionnaires and focus groups. The third phase focused in the usability aspects of the app. It consisted in the development and test of the prototype v5. Eight technology specialists assessed its usability through heuristics evaluation. RESULTS Data collected in phase one indicated there is a lack of standardization on the prescription of postural support devices (PSD). A divergent nomenclature for the PSDs was also found and classified in eight categories. These information guided the development of the first prototype of the EasySeating app. Phase two results pointed that the prescribers value the insertion of the app into their clinical practice, as it accelerates and increases the quality of the evaluation process and improves the organization of the prescription information. Significant suggestions for the improvement of the app were given during the users tests, including the use of images to represent the PSDs. The usability tests from the third phase revealed two strong issues that must be solved: the need of greater feedback and failures in the persistence of the input data. CONCLUSIONS This study demonstrated that there is a lack of systematization of the WPSD prescription process. The evaluation of the developed EasySeating app demonstrated that there is a potential to standardize, integrate and organize the WPSD prescription information, supporting and facilitating the decision making process of the prescribers. CLINICALTRIAL This study was approved by the Research Ethics Board of the Universidade de São Paulo (registered protocol n°53929516.6.0000.0065) URL - http://plataformabrasil.saude.gov.br/login.jsf

Foucault as Superauthor

2019 ◽  
Vol 29 (2) ◽  
pp. 104-125
Keyword(s):  
Free Speech ◽  
Second Phase ◽  
Contemporary Society ◽  
Sovereign Power ◽  
Ancient Greek ◽  
Main Motivation ◽  
Critical Attitude ◽  
The Third ◽  
Third Phase ◽  
Lecture Courses

Three phases in Foucault’s examination of authorship and free speech were essential to him throughout his life. They can be linked to such texts as the three lectures “What is an Author?” (first phase), “What is Critique?,” and “What is Revolution?” (second phase), and the two lecture courses, “Fearless Speech,” and “The Courage of Truth” (third phase). Initially, Foucault merely describes the founders of discursivity (hence, “superauthors”), among whom he reckoned only Marx and Freud, as the sole alternative to his own conceptualization of the author function, which is exhibited en masse in contemporary society. He then modifies his views on superauthorship by making Kant the paradigm and by linking his own concept of free speech to a Kan-tian critical attitude. However, Foucault claims only the half of Kant’s philosophical legacy that is related to the study of the ontology of the self.The article advances the hypothesis that the sovereign power of speech, which can be found in Marx and Heidegger and in generally in the concept of “superauthorship,” becomes unacceptable for Foucault. During the third phase, the danger of a tyrannical use of free speech compels Foucault to make a number of fruitful but questionable choices in his work. He focuses on a single aspect of free speech in which a speaker is in a weaker position and therefore has to overcome his fear in order to tell the truth. Foucault associates this kind of free speech with the ancient Greek notion of parrhesia, which according to his interpretation means “fearless speech”; however, this reading is not always supported by the ancient Greek sources. Foucault’s deliberations bring him to the radical conclusion that free speech transforms into performative “aesthetics of existence.” Foucault’s main motivation for pursuing this line of thought all through his life was to investigate his own abilities and powers as an author

scholarly journals PROFESSIONAL IDENTITY QUESTIONNAIRE FOR PSYCHOLOGICAL HELP PROVIDERS: DEVELOPMENT AND VALIDATION

2021 ◽  
Vol 7 ◽  
pp. 13-23
Author(s):  
Elīna Akmane ◽  
Kristīne Mārtinsone ◽  
Zane Krieķe ◽  
Viktorija Perepjolkina ◽  
Agnese Drunka ◽  
...  
Keyword(s):  
Focus Group ◽  
Professional Identity ◽  
Psychometric Properties ◽  
Social Workers ◽  
Group Discussion ◽  
Psychological Help ◽  
Second Phase ◽  
The Third ◽  
Third Phase ◽  
Development And Validation

The aim of this research was to develop multiscale questionnaire of professional identity (PI) and to test its psychometric properties. This research was conducted in 3 phases. During the first phase a scoping review, a focus group discussion, and a rapid literature review were conducted to identify the criteria of PI. Survey items were constructed and assessed in the second phase. The data were collected, and the psychometric properties were examined in the third phase. The survey was completed by 239 psychological help providers in Latvia (psychiatrists (n = 13), nurses (n = 37), psychotherapists (n = 8), art therapists (n = 45), psychologists (n = 55), psychotherapy specialists (n = 28) and social workers (n = 53)) aged between 22 and 80 years (M = 45.8; SD = 10.6) of which 95% women (n = 227) and 5% men (n = 12). As a result, 8 factors structure was confirmed (k = 38). Overall, it can be concluded that the survey examines a unified phenomenon, and the items are internally consistent on all scales (α = .715 - .873). The development of this questionnaire is an important step towards the research of PI.   

Sign in / Sign up

Export Citation Format

Share Document