scholarly journals Percepatan Perhitungan Hasil Tes Sistem Online menggunakan Kompresi Database

2013 ◽  
Vol 4 (2) ◽  
pp. 1289
Author(s):  
Surya Sujarwo
Keyword(s):  
Experimental Study ◽  
Processing Time ◽  
Test System ◽  
Test Results ◽  
Online Test ◽  
Database Compression

The article explores the influence of database compression on processing time in generating online test results through experimental study. The study uses three level compressions consists of none, row and page in table used by online test system. The experiment shows that using page compression results in faster processing time and less space compared to none and row compression, and the optimal row for compression is between 1001 and 2000 rows. In summary, to reduce space usage and processing time, it is better to use page compression in user answer table of online test system and to group the participant in schedule so that users’ answer will be between 1001 and 2000 rows.

Study on Combustor Outlet Temperature Field of Gas Turbine

2011 ◽  
Vol 138-139 ◽  
pp. 962-966 ◽  
Author(s):  
Kai Liu ◽  
Li Xu
Keyword(s):  
Experimental Study ◽  
Temperature Field ◽  
Gas Turbine ◽  
Reference Value ◽  
Test System ◽  
Outlet Temperature ◽  
Test Results ◽  
Heavy Duty ◽  
Pressure Test ◽  
Heavy Duty Gas Turbine

Experimental study on combustor outlet temperature field of heavy-duty gas turbine had been finished on high-pressure test system. Experimental results indicate: The OTDF is sensitive to diameter of dilution holes, and the RTDF is sensitive to location of dilution holes. The test results have important guiding significance and reference value to design, commission and working about the similar combustor.

scholarly journals Power Consumption Analysis and Experimental Study on the Kneading and Cutting Process of Licorice Stem in Horizontal Total Mixed Ration Mixer

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2108
Author(s):  
Wentao Li ◽  
Baoqin Wen ◽  
Pengxiang Song ◽  
Yameng Shi ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Experimental Study ◽  
Power Consumption ◽  
Theoretical Basis ◽  
Power Analysis ◽  
Processing Time ◽  
Cutting Process ◽  
Test Results ◽  
Cutting Power ◽  
Total Mixed Ration ◽  
High Power Consumption

Aiming at the problems of high-power consumption and insufficient kneading and cutting of roughage in the total mixed ration mixer. In this paper, licorice stems were taken as experimental objects, the horizontal twin-shaft TMR mixer was used to carry out the experimental study. It should be as brief as possible and concise. Through the kneading and cutting process power analysis, determine the influencing factors of kneading and cutting power consumption. The auger speed, processing time and blade type were taken as experimental factors, with standard straw length rate and power consumption as indicators, Box–Behnken test with three factors and three levels was carried out, analysis of variance was performed on the test results, the results show that the significant effect of each factor on the standard grass length is processing time, blade type and auger speed in descending order. The significance of the influence on power consumption from large to small is auger speed, processing time and blade type. The response surface analysis and parameter optimization were carried out, the results show that the auger speed is 20 r/min, the processing time is 29 min, and the blade type is quincunx blade. At this time, the standard straw length was 82.634%; Power consumption 4525.815 kJ, TMR mixer performance reached the best. The results can provide a theoretical basis for the subsequent research and development of TMR mixer.

Experimental Study on Combustor Outlet Temperature Field of Gas Turbine

2013 ◽  
Vol 300-301 ◽  
pp. 104-107
Author(s):  
Kai Liu
Keyword(s):  
Experimental Study ◽  
Temperature Field ◽  
Gas Turbine ◽  
Reference Value ◽  
Test System ◽  
Outlet Temperature ◽  
Test Results ◽  
Heavy Duty ◽  
Pressure Test ◽  
Heavy Duty Gas Turbine

Experimental study on combustor outlet temperature field of heavy-duty gas turbine had been finished on high-pressure test system. Experimental results indicate: The OTDF is sensitive to diameter of dilution holes, and the RTDF is sensitive to location of dilution holes. The test results have important guiding significance and reference value to design, commission and working about the similar combustor.

Framework and performance analysis of college English testing system based on data mining technology

2021 ◽  
pp. 1-11
Author(s):  
Liu Narengerile ◽  
Li Di ◽  
Keyword(s):  
Data Mining ◽  
Test System ◽  
Test Time ◽  
Testing System ◽  
Test Results ◽  
System Software ◽  
Examination System ◽  
Mining Technology ◽  
College English ◽  
And Performance

At present, the college English testing system has become an indispensable system in many universities. However, the English test system is not highly humanized due to problems such as unreasonable framework structure. This paper combines data mining technology to build a college English test framework. The college English test system software based on data mining mainly realizes the computer program to automatically generate test papers, set the test time to automatically judge the test takers’ test results, and give out results on the spot. The test takers log in to complete the test through the test system software. The examination system software solves the functions of printing test papers, arranging invigilation classrooms, invigilating teachers, invigilating process, collecting test papers, scoring and analyzing test papers in traditional examinations. Finally, this paper analyzes the performance of this paper through experimental research. The research results show that the system constructed in this paper has certain practical effects.

scholarly journals Experimental Study on Improvement of Marine Soft Soil with Alkali Residue

2018 ◽  
Vol 53 ◽  
pp. 04021
Author(s):  
SHAO Yong ◽  
LIU Xiao-li ◽  
ZHU Jin-jun
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Void Ratio ◽  
Soft Soil ◽  
Compressive Modulus ◽  
Engineering Properties ◽  
Test Results ◽  
Use Of Resources ◽  
One Year

Industrial alkali slag is the discharge waste in the process of alkali production. About one million tons of alkali slag is discharged in China in one year. It is a burden on the environment, whether it is directly stacked or discharged into the sea. If we can realize the use of resources, it is a multi-pronged move, so alkali slag is used to improve solidified marine soft soil in this paper. The test results show that the alkali residue can effectively improve the engineering properties of marine soft soil. Among them, the unconfined compressive strength and compressive modulus are increased by about 10 times, and the void ratio and plasticity index can all reach the level of general clay. It shows that alkali slag has the potential to improve marine soft soil and can be popularized in engineering.

scholarly journals The Influence of the Asymmetric Arb Process on the Properties of Al-Mg-Al Multi-Layer Sheets / Wpływ Asymetrii W Procesie Arb Na Właściwości Wielowarstwowych Blach Al-Mg-Al

2015 ◽  
Vol 60 (4) ◽  
pp. 2821-2826 ◽  
Author(s):  
A. Wierzba ◽  
S. Mróz ◽  
P. Szota ◽  
A. Stefanik ◽  
R. Mola
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Tensile Strength ◽  
Rolling Process ◽  
Asymmetry Factor ◽  
Relative Reduction ◽  
Test Results ◽  
Initial Thickness ◽  
Asymmetric Rolling ◽  
Aluminium Layer

The paper presents the results of the experimental study of the three-layer Al-Mg-Al sheets rolling process by the ARB method. The tests carried out were limited to single-pass symmetric and asymmetric rolling processes. An Al-Mg-Al package with an initial thickness of 4 mm (1-2-1 mm) was subjected to the process of rolling with a relative reduction of 50%. To activate the shear band in the strip being deformed, an asymmetry factor of av=2 was applied. From the test results, an increase in the tensile strength of the multi-layer Al-Mg-Al sheets obtained from the asymmetric process was observed. Microhardness tests did not show any significant differences in aluminium layer between respective layers of sheets obtained from the symmetric and the asymmetric process. By contrast, for the magnesium layer, an increase in microhardness from 72 HV to 79 HV could be observed for the asymmetric rolling. The analysis of the produced Al-Mg-Al sheets shows that the good bond between individual layers and grain refinement in the magnesium layer contributed to the obtaining of higher mechanical properties in the multi-layer sheets produced in the asymmetric process compared to the sheets obtained from the symmetric process.

Experimental Study of Improved Tool in High Manganese Steel Drilling

2010 ◽  
Vol 97-101 ◽  
pp. 1863-1866
Author(s):  
Liang Yang ◽  
Li Xu
Keyword(s):  
Experimental Study ◽  
Simulation Method ◽  
Manganese Steel ◽  
Drill Bit ◽  
Test Results ◽  
Comparison Analysis ◽  
High Manganese ◽  
Drilling Force ◽  
High Manganese Steel ◽  
Drill Tool

Performance of tool has always been a puzzle in the course of high manganese steel drilling. In this paper, improvement of drill tool is been done on drill bit structure and parameters of cutting tip by means of analyzing geometric parameter. By utilizing simulation method correctly, the influence of bit parameter on drilling force is analyzed. Meanwhile, by adopting the way of dividing into groups, comparison experiment between improved and no improved has been done. The comparison analysis of test results is carried out including tool life, wear and drilling force. The conclusion showed that the improved bit has better performance.

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

The Detection Method of Lane Line Based on the Improved Otsu Threshold Segmentation

2015 ◽  
Vol 741 ◽  
pp. 354-358 ◽  
Author(s):  
Yang Shan Tang ◽  
Dao Hua Xia ◽  
Gui Yang Zhang ◽  
Li Na Ge ◽  
Xin Yang Yan
Keyword(s):  
Image Segmentation ◽  
Processing Time ◽  
Detection Method ◽  
Segmentation Algorithm ◽  
Test Results ◽  
Threshold Segmentation ◽  
Otsu Method ◽  
Time Requirements ◽  
Lane Line ◽  
Center Distance

For overcoming the shortage of Otsu method, proposed an improved Otsu threshold segmentation algorithm. On the basis of Otsu threshold segmentation algorithm, the gray level was divided into two classes according to the image segmentation, to determine the best threshold by comparing their center distance, so as to achieve peak line recognition under the condition of multiple gray levels. Then did experiments on image segmentation of the lane line with MATLAB by traditional Otsu threshold segmentation algorithm and the improved algorithm, the threshold of traditional Otsu threshold segmentation algorithm is 144 and the threshold of the improved Otsu threshold segmentation algorithm is 131, the processing time is within 0.453 s. Test results show that the white part markings appear more, the intersection place of white lines and the background is more clear, so this method can identify lane markings well and meet the real-time requirements.

Sign in / Sign up

Export Citation Format

Share Document