Abstract
The use of advanced simulation has become increasingly more important in the planning, design, and assessment phases of future fusion plasma diagnostics, and in the interpretation of experimental data from existing ones. The design cycle of complex reflectometry systems, such as the ones being planned for next generation machines (IDTT and DEMO), relies heavily on the results produced by synthetic diagnostics, used for system performance evaluation and prediction, both crucial in the design process decision making. These synthetic diagnostics need realistic representations of all system components to incorporate the main effects that shape their behavior. Some of the most important elements that are required to be well modelled and integrated in simulations are the wave launcher structures, such as the waveguides, tapers, and antennas, as well as the vessel wall structures and access to the plasma. The latter are of paramount importance and are often neglected in this type of studies. Faithfully modelling them is not an easy task, especially in 3D simulations. The procedure herein proposed consists in using CAD models of a given machine, together with parameterizable models of the launcher, to produce a description suited for Finite Difference Time Domain (FDTD) 3D simulation, combining the capabilities of real-world CAD design with the power of simulation. However, CAD model geometric descriptions are incompatible with the ones used by standard FDTD codes. CAD software usually outputs models in a tessellated mesh while FDTD simulators use Volumetric Pixel (VOXEL) descriptions. To solve this interface problem, we implemented a pipeline to automatically convert complex CAD models of tokamak vessel components and wave launcher structures to the VOXEL input required by REFMUL3, a full wave 3D Maxwell FDTD parallel code. To illustrate the full procedure, a complex reflectometry synthetic diagnostic for IDTT was setup, converted and simulated. This setup includes 3 antennas recessed into the vessel wall, for thermal protection, one for transmission and reception, and two just for reception.
Automatized Evaluation of Students’ CAD Models