Fabrication of an Innovative Three-Dimensional Printed Bioceramic Porous Scaffold for Biomedical Applications: Wettability, Mechanical Property, and Biocompatibility

2021 ◽  
Author(s):  
Yung-Chieh Cho ◽  
Pei-Bang Liao ◽  
Keng-Liang Ou ◽  
Hsin-Hua Chou ◽  
Hung-Yang Lin ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Biomedical Applications ◽  
Porous Scaffold ◽  
Three Dimensional

scholarly journals On Various Porous Scaffold Fabrication Methods

2017 ◽  
Vol 16 (4) ◽  
pp. 47-52 ◽  
Author(s):  
D Elamparithi ◽  
V Moorthy
Keyword(s):  
Porous Structure ◽  
Biomedical Applications ◽  
Therapeutic Potential ◽  
Porous Scaffold ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Preparation Methods ◽  
Advantages And Disadvantages ◽  
And Migration ◽  
Preparation Techniques

Three-dimensional scaffolds can be fabricated by various methods. These scaffold constructs showed a major impact on various biomedical applications. The bioactive porous scaffolds should have an excellent three-dimensional architecture and interconnected porous structure for cells adhesion and migration to enhance the therapeutic potential. The porosity and interconnected porous structure can be optimized using various scaffold preparation methods. In this mini review, we discussed the advantages and disadvantages of various commonly used scaffold preparation techniques.

Applications of Scanning Microscopy in Biomedical Research

1968 ◽  
Vol 26 ◽  
pp. 354-355
Author(s):  
T. L. Hayes
Keyword(s):  
Information Content ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Dental Enamel ◽  
Resolving Power ◽  
Whole Mount ◽  
Two Parameters ◽  
Content Information ◽  
Sectioned Tissue

Biomedical applications of the scanning electron microscope (SEM) have increased in number quite rapidly over the last several years. Studies have been made of cells, whole mount tissue, sectioned tissue, particles, human chromosomes, microorganisms, dental enamel and skeletal material. Many of the advantages of using this instrument for such investigations come from its ability to produce images that are high in information content. Information about the chemical make-up of the specimen, its electrical properties and its three dimensional architecture all may be represented in such images. Since the biological system is distinctive in its chemistry and often spatially scaled to the resolving power of the SEM, these images are particularly useful in biomedical research.In any form of microscopy there are two parameters that together determine the usefulness of the image. One parameter is the size of the volume being studied or resolving power of the instrument and the other is the amount of information about this volume that is displayed in the image. Both parameters are important in describing the performance of a microscope. The light microscope image, for example, is rich in information content (chemical, spatial, living specimen, etc.) but is very limited in resolving power.

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

Three-Dimensional Printing Using a Maize Protein: Zein-Based Inks in Biomedical Applications

2021 ◽  
Author(s):  
Jorge Alfonso Tavares-Negrete ◽  
Alberto Emanuel Aceves-Colin ◽  
Delia Cristal Rivera-Flores ◽  
Gladys Guadalupe Díaz-Armas ◽  
Anne-Sophie Mertgen ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Maize Protein ◽  
Dimensional Printing

scholarly journals Two-photon polymerization nanolithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications

2020 ◽  
Vol 9 (1) ◽  
pp. 1118-1136
Author(s):  
Zhenjia Huang ◽  
Gary Chi-Pong Tsui ◽  
Yu Deng ◽  
Chak-Yin Tang
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Water Soluble ◽  
Fabrication Technology ◽  
Nano Fabrication ◽  
Two Photon ◽  
Nano Structures ◽  
Wide Range ◽  
Stimulus Responsive ◽  
Two Photon Polymerization

AbstractMicro/nano-fabrication technology via two-photon polymerization (TPP) nanolithography is a powerful and useful manufacturing tool that is capable of generating two dimensional (2D) to three dimensional (3D) arbitrary micro/nano-structures of various materials with a high spatial resolution. This technology has received tremendous interest in cell and tissue engineering and medical microdevices because of its remarkable fabrication capability for sophisticated structures from macro- to nano-scale, which are difficult to be achieved by traditional methods with limited microarchitecture controllability. To fabricate precisely designed 3D micro/nano-structures for biomedical applications via TPP nanolithography, the use of photoinitiators (PIs) and photoresists needs to be considered comprehensively and systematically. In this review, widely used commercially available PIs are first discussed, followed by elucidating synthesis strategies of water-soluble initiators for biomedical applications. In addition to the conventional photoresists, the distinctive properties of customized stimulus-responsive photoresists are discussed. Finally, current limitations and challenges in the material and fabrication aspects and an outlook for future prospects of TPP for biomedical applications based on different biocompatible photosensitive composites are discussed comprehensively. In all, this review provides a basic understanding of TPP technology and important roles of PIs and photoresists for fabricating high-precision stimulus-responsive micro/nano-structures for a wide range of biomedical applications.

In vivo metabolizable branched poly(ester amide) based on inositol and amino acids as drug nanocarrier for cancer therapy

2021 ◽  
Author(s):  
Jun Wu ◽  
Qi-Juan Yuan ◽  
Li Wang ◽  
Jun Huang ◽  
Wei Zhao
Keyword(s):  
Mechanical Property ◽  
Amino Acids ◽  
Amino Acid ◽  
Cancer Therapy ◽  
Biomedical Applications ◽  
Bioactive Components ◽  
Good Biocompatibility

Amino acid-based poly(ester amide) (PEA) has been utilized for various biomedical applications for its tunable mechanical property, good biocompatibility, and biodegradability. However, bioactive components have rarely been incorporated into the...

Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications

ACS Nano ◽  
2015 ◽  
Vol 9 (4) ◽  
pp. 4636-4648 ◽  
Author(s):  
Adam E. Jakus ◽  
Ethan B. Secor ◽  
Alexandra L. Rutz ◽  
Sumanas W. Jordan ◽  
Mark C. Hersam ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Dimensional Printing

scholarly journals Porous Geometry Guided Micro-mechanical Environment Within Scaffolds for Cell Mechanobiology Study in Bone Tissue Engineering

2021 ◽  
Vol 9 ◽  
Author(s):  
Feihu Zhao ◽  
Yi Xiong ◽  
Keita Ito ◽  
Bert van Rietbergen ◽  
Sandra Hofmann
Keyword(s):  
Porous Scaffold ◽  
Mechanical Strain ◽  
Three Dimensional ◽  
Pore Geometry ◽  
Cell Physiology ◽  
Porous Scaffolds ◽  
Mechanical Environment ◽  
Functional Features ◽  
Future Work

Mechanobiology research is for understanding the role of mechanics in cell physiology and pathology. It will have implications for studying bone physiology and pathology and to guide the strategy for regenerating both the structural and functional features of bone. Mechanobiological studies in vitro apply a dynamic micro-mechanical environment to cells via bioreactors. Porous scaffolds are commonly used for housing the cells in a three-dimensional (3D) culturing environment. Such scaffolds usually have different pore geometries (e.g. with different pore shapes, pore dimensions and porosities). These pore geometries can affect the internal micro-mechanical environment that the cells experience when loaded in the bioreactor. Therefore, to adjust the applied micro-mechanical environment on cells, researchers can tune either the applied load and/or the design of the scaffold pore geometries. This review will provide information on how the micro-mechanical environment (e.g. fluid-induced wall shear stress and mechanical strain) is affected by various scaffold pore geometries within different bioreactors. It shall allow researchers to estimate/quantify the micro-mechanical environment according to the already known pore geometry information, or to find a suitable pore geometry according to the desirable micro-mechanical environment to be applied. Finally, as future work, artificial intelligent – assisted techniques, which can achieve an automatic design of solid porous scaffold geometry for tuning/optimising the micro-mechanical environment are suggested.

Development of Scaffold Building Units and Assembly for Tissue Engineering Using Fused Deposition Modelling

2009 ◽  
Vol 83-86 ◽  
pp. 269-274 ◽  
Author(s):  
Syed H. Masood ◽  
Kadhim Alamara
Keyword(s):  
Tissue Engineering ◽  
Pore Size ◽  
Fused Deposition Modeling ◽  
Porous Scaffold ◽  
Cell Structure ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Unit Cells

In tissue engineering (TE), a porous scaffold structure of biodegradable material is required as a template to guide the proliferation, growth and development of cells appropriately in three dimensions. The scaffold must meet design requirements of appropriate porosity, pore size and interconnected structure to allow cell proliferation and adhesion. This paper presents a methodology for design and manufacture of TE scaffolds with varying porosity by employing open structure building units and Fused Deposition Modeling (FDM) rapid prototyping technique. A computer modeling approach for constructing and assembly of three-dimensional unit cell structure is presented to provide a solution of scaffolds design that can potentially meet the diverse requirements of TE applications. A parametric set of open polyhedral unit cells is used to assist the user in designing the required micro-architecture of the scaffold with required porosity and pore size and then the Boolean operation is used to create the scaffold of a given CAD model from the designed microstructure. The procedure is verified by fabrication of physical scaffolds using the commercial FDM system.

Sign in / Sign up

Export Citation Format

Share Document