scholarly journals Statistical Analysis on Shear Strength Parameter from Index Properties of Fine-grained Soils

2021 ◽  
Author(s):  
Tariku Tafari Bakala ◽  
Emer Tucay Quezon ◽  
Mohammed Yasin
Keyword(s):  
Shear Strength ◽  
Statistical Analysis ◽  
Strength Parameter ◽  
Index Properties ◽  
Fine Grained ◽  
Shear Strength Parameter

scholarly journals Statistical Analysis on Shear Strength Parameter from Index Properties of Fine-grained Soils

2021 ◽  
pp. 15-28
Author(s):  
Tariku Tafari Bakala ◽  
Emer Tucay Quezon ◽  
Mohammed Yasin
Keyword(s):  
Shear Strength ◽  
Statistical Analysis ◽  
Linear Regression ◽  
Statistical Models ◽  
Undrained Shear Strength ◽  
Strength Parameter ◽  
Index Properties ◽  
Fine Grained ◽  
Shear Strength Parameter ◽  
Undrained Shear

Shear strength is the essential engineering property of soil required to analyze and design foundations, retaining walls, bridges, embankment, and related infrastructure. The laboratory equipment and field instruments are not sufficient in developing countries to obtain soil engineering properties, especially strength properties. Thus, Geotechnical engineers usually endeavor to develop statistical models that best fit a particular area and soil type, especially for analysis and design purposes. In this research, a Statistical Analysis on the Shear Strength parameter from the Index Properties of Fine-Grained Soils was studied. For predicting the undrained shear strength parameter, single linear regression (SLR) and multiple linear regressions (MLR) analyses were developed. To develop the intended statistical models for a study, SAS JMP Pro 13, SPSS v22, and Microsoft Excel-2013 software were introduced. The results of a  study indicated that undrained shear strength(Cu) was significantly correlated with liquid limit(LL), plastic limit(PL), bulk density (ρbulk), dry density(ρdry), natural moisture content(NMC), and plasticity index(PI). While it was not significantly correlated with a specific gravity (Gs) and liquidity index (LI) of study area soil. Finally, a strong Model of Cu with a coefficient of determination (R2 = 0.806), good significance level, and less Std. error was obtained from multiple linear regression (MLR) analysis. The developed model can figure undrained shear strength parameter and wide application in the construction industry to minimize the cost, effort, and time for laboratory tests of shear strength parameter of a study area.

scholarly journals Statistical Analysis on Shear Strength Parameter from Index Properties of Fine-grained Soils

2021 ◽  
Author(s):  
Tariku Tafari Bakala ◽  
Emer Tucay Quezon ◽  
Mohammed Yasin
Keyword(s):  
Shear Strength ◽  
Statistical Analysis ◽  
Linear Regression ◽  
Statistical Models ◽  
Undrained Shear Strength ◽  
Strength Parameter ◽  
Index Properties ◽  
Fine Grained ◽  
Shear Strength Parameter ◽  
Undrained Shear

Shear strength is the essential engineering property of soil required to analyze and design foundations, retaining walls, bridges, embankment, and related infrastructure. The laboratory equipment and field instruments are not sufficient in developing countries to obtain soil engineering properties, especially strength properties. Thus, Geotechnical engineers usually endeavor to develop statistical models that best fit a particular area and soil type, especially for analysis and design purposes. In this research, a Statistical Analysis on the Shear Strength parameter from the Index Properties of Fine-Grained Soils was studied. For predicting the undrained shear strength parameter, single linear regression (SLR) and multiple linear regressions (MLR) analyses were developed. To develop the intended statistical models for a study, SAS JMP Pro 13, SPSS v22, and Microsoft Excel-2013 software were introduced. The results of a study indicated that undrained shear strength(Cu) was significantly correlated with liquid limit(LL), plastic limit(PL), bulk density (ρbulk), dry density(ρdry), natural moisture content(NMC), and plasticity index(PI). While it was not significantly correlated with a specific gravity (Gs) and liquidity index (LI) of study area soil. Finally, a strong Model of Cu with a coefficient of determination (R2 = 0.806), good significance level, and less Std. error was obtained from multiple linear regression (MLR) analysis. The developed model can figure undrained shear strength parameter and wide application in the construction industry to minimize the cost, effort, and time for laboratory tests of shear strength parameter of a study area.

scholarly journals Alternatif Fondasi Tiang Pancang Pada Gedung Pengendalian Penduduk dan Keluarga Berencana (P2KB) Palu

2021 ◽  
pp. 69-78
Author(s):  
R. Hidayat ◽  
Irdhiani Irdhiani
Keyword(s):  
Shear Strength ◽  
Bearing Capacity ◽  
Lateral Force ◽  
Empirical Method ◽  
Strength Parameter ◽  
Single Pile ◽  
Building Structures ◽  
Foundation Design ◽  
Safety Requirements ◽  
Shear Strength Parameter

The foundation design of Pengendalian Penduduk dan Keluarga Berencana is located on Jl. R.A. Kartini No. 100, Palu City, Central Sulawesi. In field testing using 2-point of (CPT), the value of hard-ground support at 8 – 9 m below the surface and the loads of building structures of 2 (two) floor buildings that work on the foundations are quite large, this is a consideration in choosing the type of used foundation. The point of this design is to obtain the dimensions of the pile foundation and calculate the bearing capacity of the foundation permit and settlement that meet the safety requirements. The calculation for bearing capacity of the foundation is calculated using (CPT) data and soil shear strength parameter data (c and tetha). Single pile is calculation by using the Semi-Empirical method and using Brooms Method for calculating lateral force on the driven piles. The dimensions of the foundation are planned based on the load (Qv) acting on the entire foundation. Calculation of bearing capacity of a single pile with a penetration depth of 8,20 m and varying dimensions are used in the planning. Based on the calculation of the bearing capacity of a single pile using (CPT) data on the load that works on the foundation, was obtained 25 cm and 30 cm diameter of pile. while the calculation uses ground shear strength parameter data (c and tetha) obtained pile diameter of 30 cm and diameter of 35 cm. Based on the calculation of the bearing capacity of a single pile, the dimensions of the foundation and the settlement in permits has reached the safety requirements.

A method for determination of ϕb for statically compacted soils

1996 ◽  
Vol 33 (2) ◽  
pp. 272-280 ◽  
Author(s):  
S Y Oloo ◽  
D G Fredlund
Keyword(s):  
Shear Strength ◽  
Unsaturated Soils ◽  
Direct Shear Test ◽  
Shear Test ◽  
Strength Parameter ◽  
Direct Shear ◽  
Compacted Soils ◽  
Shear Strength Parameter ◽  
Direct Shear Apparatus

The unsaturated shear strength parameter, ϕb, is usually determined using triaxial of direct shear apparatus that have been modified to allow for the control and (or) measurement of pore-air and pore-water pressures. A fairly high level of expertise is required for the characterization of ϕb using these modified apparatus. A simple procedure for determining ϕb for statically compacted soils at different water contents is presented along with a method of analysis. The tests can be performed on a conventional direct shear apparatus. The unsaturated shear strength parameter, ϕb, obtained using the proposed procedure is shown to be comparable to that obtained using the modified direct shear test. Since the proposed procedure utilizes standard laboratory direct shear equipment and takes a relatively short time to complete, it offers an easy and convenient alternative for the determination of ϕb for statically compacted soils. Key words: shear strength, matric suction, unsaturated soils, statically compacted soils, direct shear test.

Sign in / Sign up

Export Citation Format

Share Document