Giant Magnetocaloric Response Induced by Tuning the Intrinsic Exchange Field in the Alloys With Random Magnetic Anisotropy Under a Constant Magnetic Field

2021 ◽  
Author(s):  
Jiayu Zhang ◽  
Fei Hao ◽  
Zongbin Li ◽  
Yong Hu
Keyword(s):  
Magnetic Field ◽  
Magnetic Anisotropy ◽  
Constant Magnetic Field ◽  
Exchange Field ◽  
Random Magnetic Anisotropy

scholarly journals High Frequency Magnetoimpedance of FeNi/Cu/FeNi Sensitive Elements with Different Geometries

2009 ◽  
Vol 152-153 ◽  
pp. 373-376 ◽  
Author(s):  
Stanislav O. Volchkov ◽  
Andrey V. Svalov ◽  
G.V. Kurlyandskaya
Keyword(s):  
Magnetic Field ◽  
Experimental Data ◽  
External Magnetic Field ◽  
Finite Elements ◽  
Magnetic Anisotropy ◽  
Constant Magnetic Field ◽  
High Frequency ◽  
Complex Impedance ◽  
Rf Sputtering ◽  
Frequency Range

In this work magnetoimpedance (MI) behaviour was studied experimentally for Fe19Ni81(175 nm)/Cu(350 nm)/Fe19Ni81(175 nm) sensitive elements deposited by rf-sputtering. A constant magnetic field was applied in plane of the sandwiches during deposition perpendicular to the Cu-lead in order to induce a magnetic anisotropy. Sandwiches with different width (w) of FeNi parts were obtained. The complex impedance was measured as a function of the external magnetic field for a frequency range of 1 MHz to 700 MHz for MI elements with different geometries. Some of MI experimental data are comparatively analysed with finite elements numerical calculations data. The obtained results can be useful for optimization of the design of miniaturized MI detectors.

Magnetization dynamics of irradiation-fabricated perpendicularly magnetized dots inside a softer magnetic matrix

2003 ◽  
Vol 777 ◽  
Author(s):  
T. Devolder ◽  
M. Belmeguenai ◽  
C. Chappert ◽  
H. Bernas ◽  
Y. Suzuki
Keyword(s):  
Domain Wall ◽  
Magnetic Anisotropy ◽  
Magnetization Reversal ◽  
Ion Irradiation ◽  
Magnetic Nanostructures ◽  
Magnetic Storage ◽  
Exchange Field ◽  
Static Magnetization ◽  
Specific Domain ◽  
Helium Ion

AbstractGlobal Helium ion irradiation can tune the magnetic properties of thin films, notably their magneto-crystalline anisotropy. Helium ion irradiation through nanofabricated masks can been used to produce sub-micron planar magnetic nanostructures of various types. Among these, perpendicularly magnetized dots in a matrix of weaker magnetic anisotropy are of special interest because their quasi-static magnetization reversal is nucleation-free and proceeds by a very specific domain wall injection from the magnetically “soft” matrix, which acts as a domain wall reservoir for the “hard” dot. This guarantees a remarkably weak coercivity dispersion. This new type of irradiation-fabricated magnetic device can also be designed to achieve high magnetic switching speeds, typically below 100 ps at a moderate applied field cost. The speed is obtained through the use of a very high effective magnetic field, and high resulting precession frequencies. During magnetization reversal, the effective field incorporates a significant exchange field, storing energy in the form of a domain wall surrounding a high magnetic anisotropy nanostructure's region of interest. The exchange field accelerates the reversal and lowers the cost in reversal field. Promising applications to magnetic storage are anticipated.

A CMT Device for Electric Energy Meter Detection

2020 ◽  
Vol 13 ◽  
Author(s):  
Zhi Zeng ◽  
Yongfu Zhou
Keyword(s):  
Magnetic Field ◽  
Constant Magnetic Field ◽  
Electromagnetic Interference ◽  
Production Efficiency ◽  
Electric Energy ◽  
Labor Cost ◽  
Automatic Testing ◽  
National Standard ◽  
Measurement Instruments ◽  
Detection Technology

Background: Detection technology is a product development technique that serves as a basis for quality assurance. As electric energy meters (EEMs) are measurement instruments whose use is mandatory in several nations, their accuracy, which directly depends on their reliability and proper functioning, is paramount. In this study, to eliminate electromagnetic interference, a device is developed for testing a set of EEMs under a constant magnetic field interference. The detection device can simultaneously test 6 electric meters; moreover, in the future, it will be able to measure the influence of magnetic field strength on the measurement accuracy of EEMs, thereby improving the production efficiency of electric meter manufacturers. Methods: In this study, we first design a 3D model of the detection device for a single meter component; then, we establish a network, which includes a control system, and perform the planning of the path of a block that generates a constant magnetic field. Finally, we control the three-axis motion and rotation of the block using a PLC to implement detection for the five sides of the EEM. Results & Discussion: The proposed device can accurately determine whether an EEM can adequately function, within the error range prescribed by a national standard, under electromagnetic interference; this can enable reliable, automatic testing and fault detection for EEMs. Experiments show that our device can decrease the labor cost for EEM manufacturers.

scholarly journals Ground state and stability of the fractional plateau phase in metallic Shastry–Sutherland system TmB4

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Matúš Orendáč ◽  
Slavomír Gabáni ◽  
Pavol Farkašovský ◽  
Emil Gažo ◽  
Jozef Kačmarčík ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Phase Diagram ◽  
Ground State ◽  
Constant Magnetic Field ◽  
Paramagnetic Phase ◽  
The Other ◽  
Zero Field ◽  
Plateau Phase ◽  
Low Field ◽  
Zero Field Cooling

AbstractWe present a study of the ground state and stability of the fractional plateau phase (FPP) with M/Msat = 1/8 in the metallic Shastry–Sutherland system TmB4. Magnetization (M) measurements show that the FPP states are thermodynamically stable when the sample is cooled in constant magnetic field from the paramagnetic phase to the ordered one at 2 K. On the other hand, after zero-field cooling and subsequent magnetization these states appear to be of dynamic origin. In this case the FPP states are closely associated with the half plateau phase (HPP, M/Msat = ½), mediate the HPP to the low-field antiferromagnetic (AF) phase and depend on the thermodynamic history. Thus, in the same place of the phase diagram both, the stable and the metastable (dynamic) fractional plateau (FP) states, can be observed, depending on the way they are reached. In case of metastable FP states thermodynamic paths are identified that lead to very flat fractional plateaus in the FPP. Moreover, with a further decrease of magnetic field also the low-field AF phase becomes influenced and exhibits a plateau of the order of 1/1000 Msat.

Structural studies of epoxy polymers cured in a constant magnetic field

1985 ◽  
Vol 20 (4) ◽  
pp. 402-405 ◽  
Author(s):  
T. A. Man'ko ◽  
A. N. Kvasha ◽  
A. V. Solov'ev ◽  
V. B. Shcheneva ◽  
I. M. Ermolaev
Keyword(s):  
Magnetic Field ◽  
Constant Magnetic Field ◽  
Structural Studies ◽  
Epoxy Polymers

INFLUENCE OF AN EXTERNAL MAGNETIC FIELD ON THE DYNAMICS OF A NEW-PHASE NUCLEUS IN THE VICINITY OF THE FIRST-ORDER PHASE TRANSITION IN MAGNETS WITH DEFECTS PRESENT

2012 ◽  
Vol 26 (28) ◽  
pp. 1250183 ◽  
Author(s):  
VLADIMIR NAZAROV ◽  
RISHAT SHAFEEV
Keyword(s):  
Magnetic Field ◽  
Phase Transition ◽  
External Magnetic Field ◽  
Magnetic Anisotropy ◽  
Spin Reorientation ◽  
Critical Fields ◽  
First Order ◽  
Phase Nucleus ◽  
First Order Phase Transition ◽  
New Phase

Theoretically, with the aid of a soliton model, the evolution of a new-phase nucleus near the first-order spin-reorientation phase transition in magnets has been investigated in an external magnetic field. The influence of an external field and one-dimensional defects of magnetic anisotropy on the dynamics of such nucleus has been demonstrated. The conditions for the localization of the new-phase nucleus in the region of the magnetic anisotropy defect and for its escape from the defect have been determined. The values of the critical fields which bring about the sample magnetization reversal have been identified and estimated.

Sign in / Sign up

Export Citation Format

Share Document