Salinity: Electrical Conductivity and Total Dissolved Solids

2017 ◽  
Vol 2 (1) ◽  
pp. 0 ◽  
Author(s):  
Dennis L. Corwin ◽  
Kevin Yemoto
Keyword(s):  
Electrical Conductivity ◽  
Total Dissolved Solids ◽  
Dissolved Solids

scholarly journals RESPONSE SURFACE METHODOLOGY VIA DESIRABILITY FUNCTION TECHNIQUES FOR OPTIMIZING CORRELATED RESPONSES OF ELECTRICAL CONDUCTIVITY AND TOTAL DISSOLVED SOLIDS OF SELECTED BOREHOLE WATER

2020 ◽  
Vol 4 (3) ◽  
pp. 333-342
Author(s):  
KEHINDE MONSURU YUSUFF ◽  
M. Lawal ◽  
A. T. Audu ◽  
O. A. Wale-Orojo
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Water Source ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Physical Parameters ◽  
Dissolved Solids

The health benefits in the description and observation of quantitative contents of quality parameters present or contained in any water source cannot be underestimated as they determine selection of best choice from available water sources for different intended uses as well as resource consumption. It also helps to compare the observed quantity of the quality with the acceptable standards or limits to get desired results. Physical parameters like pH, temperature, electrical conductivity (EC) and total dissolved solids (TDS) among others are determined by present of other chemical properties like Cations (Mg2+, Ca2+, Na+, etc), Anions (Cl-, NO3-, SO42+, etc), heavy metals and other dissolved materials during the course of its formation in different proportions and amounts. This study observed EC and TDS of 20 selected boreholes as two close and correlated water quality parameters as well as two of the major water quality parameters that account for overall quality of any water source, despite their different quantitative contents and physical features, they are likely determined by the same set of cations and anions with similar constraint equations. In contrast to linear programming, multiple criteria optimization models were fitted for EC and TDS using Response Surface Methodology via desirability techniques, optimal values obtained in this case measured against several criteria are found to lie between acceptable standards limits for drinking water, other numerical values and descriptive features in the final results reflect that the response equations obtained were well fitted.

scholarly journals Researchof Water Quality and its Chemical Parameters by Titration Method and Instrumenal Method

2019 ◽  
Vol 8 (6S4) ◽  
pp. 871-874
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Water Samples ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Analysis ◽  
Instrumental Method ◽  
Titration Method ◽  
Dissolved Solids

he water quality analysis is an important aspect in understanding the behavior of water and what can they be used for. This study gives us a valuable information on the general properties of water quality parameters like pH, electrical conductivity, TDS, Bicarbonate, Sulfate, Nitrate, chloride etc. of the study area . Water samples were analyzed at the water quality lab. NIH, Roorkee for pH, electrical conductivity and total dissolved solids. The pH of water varied from 7.14 to 7.75. The electrical conductivity (EC) of sample falls from 620µS/cm to 2000µS/cm. The overall total dissolved solids in water of study area varied from 120mg/l to 900mg/l. Overall the range of the Chloride in water of the study area tend to falls between 13mg/l to 375mg/l. Sulfate of all the water samples that were collected from the study area have ranged from 28mg/l to 250mg .The range of the Bicarbonate of all the water samples varied from 320mg/l to 1051mg/l. The study area helps to know about water quality parameters and how to find their values by usingtwo methods : 1) titration method 2) instrumental method .It also helps us to apply these water quality parameters in ArcGis. It helps us to show the values of different parameters in different blocks ofambala for different years In this we have studied different blocks of ambala district Haryana .We have taken the samples from different places from the blocks and also samples are from wells, canal , rivers, ponds.

scholarly journals Hydrochemistry of Groundwater in Northeast Part of Anbar Governorate – West of Iraq

2019 ◽  
Vol 16 (1) ◽  
pp. 0088
Author(s):  
Hussein Ilaibi Zamil Al-Sudani
Keyword(s):  
Electrical Conductivity ◽  
Groundwater Quality ◽  
Total Dissolved Solids ◽  
Water Type ◽  
Hydrochemical Parameters ◽  
Dissolved Solids ◽  
Drinking Purposes ◽  
Groundwater Samples ◽  
Geological Formation ◽  
Continental Origin

A groundwater quality assessment has been carried out in northeast part of Anbar governorate in western Iraq. We analyzed hydrochemical parameters such as pH, electrical conductivity, total dissolved solids presence of ions to describe groundwater quality. The study area has the only confined aquifer within the geological formation extended in area. Values of groundwater hydrochemical parameters were ranged from (7) to (7.9) for ph, (1599) to (6800) µmhos/cm for electrical conductivity (EC) and (1048) to (4446) mg/l for total dissolved solids (TDS). The origins and types of groundwater in the area were of marine origin and MgCl2 water type while only (6) samples were of continental origin and Na2SO4 water type. Groundwater utilization indicated that it can't be used for drinking purposes, while few groundwater wells can be used for agricultural and (33) groundwater samples can be used for animal purposes. However, the nature of the soil in the area and the depth of the groundwater qualified water for agricultural uses in significant and wide ranges.

scholarly journals Kajian Proses Fermentasi Bioslurry Kotoran Sapi dengan Penambahan Molase

2018 ◽  
Vol 3 (1) ◽  
pp. 277
Author(s):  
I Made Mudiarta ◽  
Yohanes Setiyo ◽  
I Wayan Widia
Keyword(s):  
Electrical Conductivity ◽  
Biochemical Oxygen Demand ◽  
Oxygen Demand ◽  
Total Dissolved Solids ◽  
Dissolved Solids

Penelitian ini bertujuan untuk mengetahui interaksi perlakuan penambahan molase dan penggunaan aerator pada proses fermentasi bioslurry kotoran sapi dan untuk mengetahui perlakuan terbaik pada proses fermentasi bioslurry kotoran sapi sesuai dengan persyaratan teknis minimal pupuk organik cair No.70./Permentan/SR.140/10/2011. Penelitian ini menggunakan rancangan acak kelompok faktorial dengan dua faktor dan tiga taraf perlakuan. Faktor pertama adalah penambahan 0, 2 dan 3 persen molase dan faktor kedua adalah penggunaan aerator 0, 1 dan 2. Masing-masing perlakuan diulang sebanyak tiga kali. Parameter yang diamati adalah suhu, biochemical oxygen demand, pH, total dissolved solids, electrical conductivity, C-organik, N-total, rasio C/N dan warna bioslurry. Hasil penelitian menunjukkan bahwa interaksi perlakuan penambahan molase dan penggunaan aerator berpengaruh pada proses fermentasi bioslurry kotoran sapi. Interaksi perlakuan penambahan molase 2 - 3 persen dengan penggunaan aerator 1-2 dapat mempercepat proses fermentasi bioslurry kotoran sapi dari 15 hari menjadi 10 hari. Hal ini ditandai dengan nilai biochemical oxygen demand yang sudah menurun pada hari ke 10 fermentasi. Dari sembilan perlakuan pada proses fermentasi bioslurry kotoran sapi, penambahan molase 3 persen dengan penggunaan 2 aerator merupakan perlakuan yang terbaik yaitu, menghasilkan total dissolved solids 6270 ppm, electrical conductivity 3,36 mS, C-organik 6,75 persen, N-total 0,44 persen, rasio C/N 15,82 dan warna hitam. Hasil ini sudah sesuai dengan standar No.70/Permentan/SR.140/10/2011. Namun, untuk kandungan N-total bioslurry belum cukup memenuhi standar Permentan yaitu 3 - 6 persen.

scholarly journals Inter-annual chemical stratification in Brazilian natural lakes: meromixis and hypolimnetic memory

2012 ◽  
Vol 24 (2) ◽  
pp. 127-139 ◽  
Author(s):  
Luciana Gomes Barbosa ◽  
Francisco Antonio Rodrigues Barbosa ◽  
Carlos Eduardo de Mattos Bicudo
Keyword(s):  
Electrical Conductivity ◽  
Light Attenuation ◽  
Total Dissolved Solids ◽  
Light Limitation ◽  
Low Light ◽  
Dissolved Solids ◽  
Attenuation Coefficients ◽  
Natural Lakes ◽  
Chemical Stratification ◽  
High Chemical Stability

AIM: chemical stratification and the patterns of light limitation and nutrients of two natural lakes, one shallow and the other one deep, were comparatively evaluated, both lakes located in the southeast Brazil. METHODS: pH, electrical conductivity, dissolved oxygen, total dissolved solids and nutrients were monthly collected during 5 consecutive years at the vertical profile of the two lakes. RESULTS: multivariate analysis indicated that the long thermal stratification period favored the occurrence of chemical stratification in the two lakes. However, in the deeper lake the stratified thermal profile with high hypolimnetic nutrient concentration, electrical conductivity, total dissolved solids and redox potential indicated that the mixing was not complete even during the annual circulation period, suggesting a slight meromixis and a high chemical stability at the hypolimnion. In the shallower lake, high light attenuation and high availability of nitrogen forms (mainly N-NH4) and phosphorus was observed along the water column, even during stratification. In the deeper lake, N and P co-limitation and low light attenuation coefficients were detected. CONCLUSION: thermal and chemical stratification patterns indicated that the Carioca lake is a shallow, turbid, nutrient rich, whereas the Dom Helvecio lake is a deep, clear, oligotrophic system with a tendency towards meromixis and the isolation of solutes in the hypolimnion. Consequently, meromixis was compared to a "hypolimnetic memory", which was defined, in the case of the deeper lake, as the maintenance of the chemical stratification along the years, during the lake thermal circulation period.

scholarly journals Bacteriological and physical quality of fiche drinking water from households and reservoirs, Oromia, Ethiopia

2021 ◽  
Author(s):  
Israel Sebsibe ◽  
Birhanu Degaga ◽  
Gezahegn Feye ◽  
Tsige Tekle
Keyword(s):  
Electrical Conductivity ◽  
Drinking Water ◽  
Experimental Analysis ◽  
Total Dissolved Solids ◽  
Fecal Coliforms ◽  
World Health ◽  
Wet Season ◽  
Dissolved Solids ◽  
Total Coliforms ◽  
Water Handling

Abstract Drinking water is the major source of bacteria pathogens in developing countries along with poor sanitation and contamination of food with a pathogen. More than half of the population of the country uses unimproved sanitation facilities while 36% of them practiced open defecation. The aim of the study was to investigate the suitability of public water for drinking. The study is designed to include a survey of 90 respondents and experimental analysis of 170 water samples from households and reservoirs. Water quality parameters, such as temperature, electrical conductivity, turbidity, total dissolved solids, and bacteriological parameters like total coliforms (TC) and fecal coliforms (FC) were determined. Many of the respondents (88.8%) remarked that the water has no smells, tastes, and color. The experimental analysis confirmed that temperature (19.7 °C), electrical conductivity (269.63 μS/cm), turbidity (1.17 NTU), and total dissolved solids (134.3 mg/L) were found below the prescribed limit of World Health Organization guidelines for drinking water. Total coliforms (9.29 CFU/100 mL) and fecal coliforms (5.07 CFU/100 mL) were detected from pipe water sources during the wet season showing non-compliance with the guidelines. The reservoir samples were free from bacterial contamination. The main point of drinking water contamination was the household where unsafe water handling practice was a common habit in the study area. Hence, awareness conception training on safe water handling practices is highly recommended for the communities.

scholarly journals Investigation of the Effect of Highway Runoff along Lagos-Badagry Expressway Using Electrical Resistivity Tomography and Physiochemical Methods

2020 ◽  
pp. 42-58
Author(s):  
A. S. Ogungbe ◽  
O. O. Olajuwon ◽  
R. B. Adegbola ◽  
A. A. Alabi ◽  
E. O. Onori ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Electrical Resistivity ◽  
Total Dissolved Solids ◽  
Clayey Sand ◽  
Highway Runoff ◽  
Dissolved Solids ◽  
Southwest Nigeria ◽  
High Level ◽  
Subsurface Resistivity ◽  
2D Resistivity

Geophysical and physiochemical investigations were carried out along Lagos-Badagry Expressway, Southwest, Nigeria on three locations dominated by highway runoff, with a view to monitoring the effect of highway runoff on nearby groundwater. The locations were: Iyana Isashi, Iyana Era and Agbara. An overview of the subsurface resistivity distribution was achieved employing Vertical Electrical Sounding (VES) using Schlumberger array and Two-dimensional (2D) resistivity imaging (Wenner array). The ABEM Terrameter SAS 1000 was used for both VES and 2D resistivity surveys and the data were analysed using IPI2win and RES2DINV, respectively. The VES results showed up to four geoelectric layers consisting of sand, clayey sand, clay and sandy soils. The resistivity at Agbara was found varying from 3.52 Ωm - 11 Ωm. This low resistivity value showed a high level of infiltration of highway runoff into the subsurface, thereby causing contamination of the groundwater. Iyana Isashi and Iyana Era have a relatively moderate resistivity values ranging from 103 Ωm to 178 Ωm. Physiochemical analysis of groundwater samples collected at the study locations revealed high electrical conductivity, total dissolved solids and pH values. The results of the borehole sample taken at 32 m away from the profile point at Agbara produced higher values of electrical conductivity and total dissolved solids than those of other locations, hence validating the electrical resistivity surveys, indicating that the groundwater sample from the survey point at Agbara is contaminated.

scholarly journals Physico-Chemical and Microbiological Qualities of Water From Wells, Drillings and Tanks Used as Drinking Water in the Municipality of Allada (Benin, West Africa)

2017 ◽  
Vol 13 (15) ◽  
pp. 69
Author(s):  
Sohounou Marc ◽  
Vissin Expédit Wilfrid ◽  
Sintondji Luc Olivier ◽  
Houssou Christophe S. ◽  
Agbossou K. Euloge ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Drinking Water ◽  
Water Source ◽  
Total Dissolved Solids ◽  
Physicochemical Analysis ◽  
High Concentration ◽  
Dissolved Solids ◽  
Physico Chemical ◽  
High Turbidity

Water, source of life, is also a source of disease when it is polluted. The aim of this study is to analyze the physicochemical quality and the bacteriological quality of the wells, boreholes and tank for drinking water in the Commune of Allada. The methodology is based on the collection of data, data processing and analysis carried out at the Laboratory for Quality Control of Water and Food (LCQEA) of the Ministry of Health. From the water sampling carried out at three (03) traditional wells, two (02) boreholes, two (02) tanks and water of river (02), bacteriological and physicochemical analysis were performed. The results showed that pH is higher at the tank than other water sources. Well 3 (P3) has a very high electrical conductivity (EC) which was 384.95 μS / cm and 192.47 mg / L for total dissolved solids (TDS). The tank 2 exhibited high value in pH 9.14; 71.72 (μS / cm) for the electrical conductivity (CE) and 35.86 mg / L, in total dissolved solids (TDS). Well 2 (P2) has a high turbidity of 4.53 (NTU) at all analyzed water points. The concentration of iron, copper nickel and cobalt remains low(less than 0.4 mg / L).Wells 2 and tank 1 are concentrated in lead, respectively 20.75mg / L and 13.71mg / L. Tank 1 and 2 have a high concentration of cadmium compared to other water points. The presence of Escherichia coli with a high concentration at home SONEB (39 CFU) and at well 2 (7.10 2 ) was found. In view of these results some recommendations were made.

scholarly journals A Study of Groundwater Characteristics by Using of Groundwater Quality Index and Pollution Index in Zubair District, Basra Province, Iraq

2018 ◽  
Vol 8 (1) ◽  
pp. 19-26
Author(s):  
Ammar S. Dawood ◽  
Mushtak T. Jabbar ◽  
Mudhar H. Gatea ◽  
Hayfaa J. Al-Tameemi
Keyword(s):  
Electrical Conductivity ◽  
Groundwater Quality ◽  
Quality Index ◽  
Calcium Nitrate ◽  
Pollution Index ◽  
Total Dissolved Solids ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Groundwater Quality Index ◽  
Groundwater Samples

Abstract The present work evaluated the groundwater quality index (GWQI) depending on some physicochemical analyses of thirteen groundwater samples in the Zubair district in Basra Province, Iraq. The collected groundwater samples were subjected to an extensive physicochemical analysis to evaluate the characteristics of water for drinking purpose according to Iraqi standard. For calculating the (GWQI), twelve water quality parameters were considered; turbidity, pH, chloride, total dissolved solids, total hardness (TH), electrical conductivity (EC), sodium, sulphate, phosphate, calcium, nitrate, and magnesium. The analysis of the results reveals that all the samples surpassed the portability of drinking water limits. High values of the (GWQI) in the obtained groundwater samples could possibly be caused by the higher values of electrical conductivity, total hardness, chloride, total dissolved solids and sodium within the groundwater. The calculated GWQI values ranged from 73.36 to 595.92. The pollution index (PI) was calculated for the study area with values ranged from 2.97 to 8.26. Correlation coefficients amongst the chosen water parameters exhibited some strong relationships. Finally, the analysis shows that the groundwater in this particular area needs to be treated before its consumption, and in addition, it usually needs to avoid the hazard of contamination. Principal component analysis (PCA) and cluster analysis (CA) indicate that the acquiring-data from groundwater samples are explained 90.5 % of the variance in the data with a four-component system that explains a large portion of the total variance of collected data.

Sign in / Sign up

Export Citation Format

Share Document