scholarly journals Effectiveness of Flame for Preplant Pest Management in Leaf Vegetable Fields

2019 ◽  
Vol 29 (6) ◽  
pp. 788-794 ◽  
Author(s):  
Wenlei Guo ◽  
Li Feng ◽  
Dandan Wu ◽  
Chun Zhang ◽  
Xingshan Tian

Widespread herbicide-resistant weeds and severe insect pest infestations pose a challenge to the preplant pest management (PPPM) strategy currently in use in leaf vegetable fields in southern China. The aim of this study was to develop a new weed and insect control method for use before planting leaf vegetables in southern China. Two flaming machines (a tractor mounted and a trolley flaming machine) were designed, and their efficacies for the control of insect and weed pests were evaluated and compared in two field trials. With liquefied petroleum gas (LPG) at 101 kg·ha−1, flaming machines reduced plant numbers by 86.7% to 98.8% 2 days after treatment (DAT), which was equal to or higher than the reduction after application of paraquat at 900 g·ha−1. Some weed species, especially awnless barnyard grass (Echinochloa colona) and goosegrass (Eleusine indica), regrew at 7 DAT, resulting in a decrease in control efficacy. Flaming machines also reduced the number of diamondback moth (Plutella xylostella) larvae by 83.0% to 88.2% and the number of adult striped flea beetles (Phyllotreta striolata) by 64.9% to 80.9%. This is the first report on flaming treatment in China to show that this method is a promising alternative to chemical pesticides for PPPM in leaf vegetable fields.

Plants ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 143 ◽  
Author(s):  
Victor Jaoko ◽  
Clauvis Nji Tizi Taning ◽  
Simon Backx ◽  
Jackson Mulatya ◽  
Jan Van den Abeele ◽  
...  

Due to potential health and environmental risks of synthetic pesticides, coupled with their non-selectivity and pest resistance, there has been increasing demand for safer and biodegradable alternatives for insect pest management. Botanical pesticides have emerged as a promising alternative due to their non-persistence, high selectivity, and low mammalian toxicity. Six Meliaceae plant species, Azadirachta indica, Azadirachta excelsa, Azadirachta siamens, Melia azedarach, Melia toosendan, and Melia volkensii, have been subject to botanical pesticide evaluation. This review focuses on Melia volkensii, which has not been intensively studied. M. volkensii, a dryland tree species native to East Africa, has shown activity towards a broad range of insect orders, including dipterans, lepidopterans and coleopterans. Its extracts have been reported to have growth inhibiting and antifeedant properties against Schistocerca gregaria, Trichoplusia ni, Pseudaletia unipuncta, Epilachna varivestis, Nezara viridula, several Spodoptera species and other insect pests. Mortality in mosquitoes has also been reported. Several limonoids with a wide range of biological activities have been isolated from the plant, including volkensin, salannin, toosendanin, trichilin-class limonoids, volkendousin, kulactone among others. This paper presents a concise review of published information on the phytochemical composition and potential of M. volkensii for application in insect pest management.


2016 ◽  
Vol 36 (04) ◽  
pp. 204-210 ◽  
Author(s):  
L. K. Agboyi ◽  
G. K. Ketoh ◽  
T. Martin ◽  
I. A. Glitho ◽  
M. Tamò

AbstractThe diamondback moth,Plutella xylostella(L.) is the major insect pest of cabbage crops in Togo and Benin. For control, farmers very often resort to spraying chemical insecticides at high dosages with frequent applications. Bioassays were carried out on three populations ofP. xylostella, two from Togo (Kara and Dapaong) and one from Benin (Cotonou), to assess their level of susceptibility to currently used insecticides. A reference strain ofP. xylostellafrom Matuu in Kenya was used as a control. In the laboratory, three insecticide representatives of different chemical families (deltamethrin, chlorpyrifos ethyl and spinosad) were assayed against third instar larvae ofP. xylostella. Results revealed thatP. xylostellapopulations from Dapaong, Kara and Cotonou were more resistant to deltamethrin (13 to 59-fold at LC50level, 149 to 1772-fold at LC90level) and chlorpyrifos ethyl (5 to 15-fold at LC50level, 9 to 885-fold at LC90level) than the reference strain. Spinosad was more toxic toP. xylostellapopulations than the other insecticides with LC50and LC90values less than 1 µg/ml and 15 µg/ml, respectively. However, the population from Cotonou appeared significantly more resistant to spinosad compared to the reference strain. These results are discussed in the light of developing an integrated pest management strategy for reducing the selection pressure of spinosad.


AGROFOR ◽  
2019 ◽  
Vol 4 (1) ◽  
Author(s):  
Roberto TOMASONE ◽  
Carla CEDROLA ◽  
Mauro PAGANO ◽  
Andrea ACAMPORA ◽  
Enrico SANTANGELO

In Italy, Dryocosmus kuriphilus is a major insect pest of chestnut orchards causinggall formation and significant yield losses. The use of the parasitoid wasp Torymussinensis is an effective biological control method that requires the appropriatemanagement of the pruning residues, to preserve the woody galls in which T.sinensis adults overwinter. An innovative tractor-pulled combined mechanicalshredder was tested for treating the residues, once the pruning operations arecompleted. The machine processes the residues in a single-step, picking-up theprunings from the orchard floor, shredding them to appropriate size, and collectingthem into a rear container. The shredded residues may then be concentrated into afew piles for the long-term field storage, until next spring. The aim of the studywas to evaluate the machinery’s operative performance, the quality of the shreddedbiomass and the impact on gall integrity. In the field trials, the machineryeffectively shredded the residues achieving an average operative capacity of 1.19ha∙h-1 and a work capacity of 1.79 t∙h-1. Moisture content, apparent bulk density,and particle size distribution of the shredded biomass were determined. Over 95%of wood chips were included in the 3.15-45 mm size range, making them suitablefor use in residential biomass furnaces. The calorific power of the chestnut residueswas similar to that reported for other hardwood species (18-20 MJ∙kg-1). Also, themechanical action of the shredder preserved at least two thirds of the winter galls,safeguarding the parasitoid’s life cycle.


1991 ◽  
Vol 67 (5) ◽  
pp. 500-505 ◽  
Author(s):  
V. G. Nealis

Forest insect pest management differs from pest management in other renewable-resource industries because of the relative complexity and stability of the forest environment. An important component of this complexity is the rich fauna of natural enemies attacking most forest insect pests. Understanding the relationship between forest insect pests and their natural enemies would permit better insight into the dynamics of pest populations.The active release of natural enemies in inoculative or inundative release strategies is a direct application of biological control to pest management. The conservation of resident natural enemies is an indirect biological control method with great potential. Knowledge of the ecology of natural enemies can be used to modify other forest practices such as reforestation and insecticide use to conserve or enhance the action of natural enemies.


2014 ◽  
Vol 41 (2) ◽  
pp. 124-130 ◽  
Author(s):  
D. Q. Wann ◽  
R. S. Tubbs

ABSTRACT Previous research has shown that mechanical cultivation is the most effective and affordable method of weed control in organic peanut production. However, growers are in need of more information on specific integrated cultivation regimes for effective season-long weed control with minimal hand-weeding requirements. Therefore, field trials were conducted in 2010–2012 to evaluate the effects of various tine and sweep cultivation treatments combined with or without hand-weeding on season-long weed control, stand establishment, and yield and grade of an organically-managed peanut crop. Tine cultivation treatments consisted of no cultivation or weekly cultivations for 5 wks after planting (WAP). Sweep treatments consisted of no cultivation, weekly cultivations (for 5 WAP), cultivations at 2 and 5 WAP only, or cultivation at 5 WAP only. Hand-weeding treatments were no hand-weeding or hand-weeding of the entire plot. There were numerous significant interactions among tine and sweep treatments on weed control. Initial weed species composition greatly affected cultivation effects on overall weed control. Tine cultivation was most effective at controlling annual grass weeds. Sweep cultivation was effective at reducing weeds (Amaranthus spp., southern crabgrass, and Florida pusley), but primarily when tine cultivation was absent. Hand-weeding significantly improved weed control for every weed species every year. Additionally, inclusion of certain cultivation regimes significantly reduced the hand-weeding time requirement over the control. However, cultivation treatments did not improve pod yield or grade in any year. The most significant benefit in cultivation from these data is in the reduction in hand-weeding requirements. Based on this research, a regime consisting of weekly tine cultivations for 5 WAP, combined with two timely sweep cultivations provided the best overall balance of weed control and minimization of hand-weeding. Hand-weeding is the most critical weed control method, followed by tine cultivation, and finally sweep cultivation, which primarily served as an aid in the event of missed tine cultivations or failure.


Weed Science ◽  
2014 ◽  
Vol 62 (4) ◽  
pp. 619-624 ◽  
Author(s):  
Antonio DiTommaso ◽  
Matthew R. Ryan ◽  
Charles L. Mohler ◽  
Daniel C. Brainard ◽  
Rachel E. Shuler ◽  
...  

Indirect effects of insect control strategies on weed populations are important to consider when developing robust integrated pest management strategies. Weed seed predation rates were investigated in corn managed under three contrasting treatments based on control practices for corn rootworm: (1) the transgenic crop Cry3Bb Bt corn, (2) the broad-spectrum insecticide tefluthrin, and (3) no insecticide control. This 2-yr field study conducted near Ithaca, NY, involved quantifying seed loss from velvetleaf, common lambsquarters, and giant foxtail in arenas with and without vertebrate exclosures. Velvetleaf and giant foxtail were unaffected by the insecticide treatment; however, average seed predation of common lambsquarters was lower in both the Bt corn (11.9%) and insecticide-treated plots (11.8%) compared with control plots (17.5%) that did not receive any insecticide. Seed predation of common lambsquarters was not affected by the vertebrate exclosure. Lower seed predation in the transgenic Bt corn and insecticide treatments was likely due to nontarget effects on carabids (Coleoptera: Carabidae). Although the reduction in seed predation was modest and limited to only one of the three weed species tested, our results highlight the need for greater risk assessment that includes the ecosystem service of weed seed predation when considering insect pest management options.


2021 ◽  
Vol 21 (No 1) ◽  
Author(s):  
Thinley Jamtsho ◽  
Najitha Banu ◽  
Chimi Kinley

Diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), has become the most destructive insect pest of Brassicaceae plants globally. Numerous control methods are available to control the moth, such as host plant resistance, physical controls, chemical controls, cultural controls, and biological controls. The continued application of insecticides has led to the development of resistance to almost 97 chemical compounds. The biological methods also became inefficient in the control of the moth. Therefore, nanotechnology would provide green and efficient alternatives for controlling the pest without harming environment. This review focuses on control methods used to manage diamondback moth and nanomaterials’ potential in insect pest management as modern nanotechnology approaches. It focuses on the past, present, and future scope of diamondback moth management


2019 ◽  
Vol 112 (4) ◽  
pp. 1634-1637 ◽  
Author(s):  
Yi-fan Li ◽  
Hong Sun ◽  
Na Xi ◽  
Yalin Zhang

Abstract The diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), is a destructive insect pest of cruciferous plants that has developed resistance to almost every listed commercial insecticide. Cantharidin as an animal-derived biopesticide is a natural defensive compound produced by Meloidae insects with toxicity to many insects including P. xylostella. Norcantharidin is an important substitute of cantharidin and has similar insecticidal activities to cantharidin. Although the toxicity of cantharidin and norcantharidin to P. xylostella has been reported, little research has focused on the effects of cantharidin or norcantharidin on the behavior of P. xylostella. In this study, we investigated the feeding behavior of third-instar larvae and the oviposition preference of adult P. xylostella in order to explore the effects of different concentrations of cantharidin and norcantharidin. Results show that cantharidin and norcantharidin have antifeedant effect on P. xylostella larvae. The values for AFC50 were 13.0228 and 149.4210 mg/ml, respectively. Furthermore, the oviposition deterrence rate of cantharidin on P. xylostella ranged from 49.37 to 58.24% and that of norcantharidin was from 20.88 to 33.33%. These results suggest cantharidin and norcantharidin may have repellent and antifeedant effect on P. xylostella, which could contribute toward using biopesticides to manage P. xylostella and may provide a new strategy for integrated pest management.


2020 ◽  
Vol 31 (1) ◽  
pp. 24-35 ◽  
Author(s):  
Somiahnadar Rajendran

Insects are a common problem in stored produce. The author describes the extent of the problem and approaches to countering it. Stored products of agricultural and animal origin, whether edible or non-edible, are favourite food for insect pests. Durable agricultural produce comprising dry raw and processed commodities and perishables (fresh produce) are vulnerable to insect pests at various stages from production till end-use. Similarly, different animal products and museum objects are infested mainly by dermestids. Insect pests proliferate due to favourable storage conditions, temperature and humidity and availability of food in abundance. In addition to their presence in food commodities, insects occur in storages (warehouses, silos) and processing facilities (flour mills, feed mills). Insect infestation is also a serious issue in processed products and packed commodities. The extent of loss in stored products due to insects varies between countries depending on favourable climatic conditions, and pest control measures adopted. In stored food commodities, insect infestation causes loss in quantity, changes in nutritional quality, altered chemical composition, off-odours, changes in end-use products, dissemination of toxigenic microorganisms and associated health implications. The insects contribute to contaminants such as silk threads, body fragments, hastisetae, excreta and chemical secretions. Insect activity in stored products increases the moisture content favouring the growth of moulds that produce mycotoxins (e.g., aflatoxin in stored peanuts). Hide beetle, Dermestes maculatus infesting silkworm cocoons has been reported to act as a carrier of microsporidian parasite Nosema bombycis that causes pebrine disease in silkworms. In dried fish, insect infestation leads to higher bacterial count and uric acid levels. Insects cause damage in hides and skins affecting their subsequent use for making leather products. The trend in stored product insect pest management is skewing in favour of pest prevention, monitoring, housekeeping and finally control. Hermetic storage system can be supplemented with CO2 or phosphine application to achieve quicker results. Pest detection and monitoring has gained significance as an important tool in insect pest management. Pheromone traps originally intended for detection of infestations have been advanced as a mating disruption device ensuing pest suppression in storage premises and processing facilities; pheromones also have to undergo registration protocols similar to conventional insecticides in some countries. Control measures involve reduced chemical pesticide use and more non-chemical inputs such as heat, cold/freezing and desiccants. Furthermore, there is an expanding organic market where physical and biological agents play a key role. The management options for insect control depend on the necessity or severity of pest incidence. Generally, nonchemical treatments, except heat, require more treatment time or investment in expensive equipment or fail to achieve 100% insect mortality. Despite insect resistance, environmental issues and residue problems, chemical control is inevitable and continues to be the most effective and rapid control method. There are limited options with respect to alternative fumigants and the alternatives have constraints as regards environmental and health concerns, cost, and other logistics. For fumigation of fresh agricultural produce, new formulations of ethyl formate and phosphine are commercially applied replacing methyl bromide. Resistance management is now another component of stored product pest management. In recent times, fumigation techniques have improved taking into consideration possible insect resistance. Insect control deploying nanoparticles, alone or as carriers for other control agents, is an emerging area with promising results. As there is no single compound with all the desired qualities, a necessity has arisen to adopt multiple approaches. Cocktail applications or combination treatments (IGRs plus organophosphorus insecticides, diatomaceous earth plus contact insecticides, nanoparticles plus insecticides/pathogens/phytocompounds and conventional fumigants plus CO2; vacuum plus fumigant) have been proved to be more effective. The future of store product insect pest management is deployment of multiple approaches and/or combination treatments to achieve the goal quickly and effectively.


HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 494f-495 ◽  
Author(s):  
Amy M. Johnson ◽  
Greg D. Hoyt

An experiment was established to determine the effect of different tillage practices, vegetable crop rotations, and pest management strategies on crop yield, plant diseases, pest and beneficial arthropods, weed species changes over time, and soil environmental consequences. This poster describes nitrogen movement from the various treatments over a 3-year rotation. The treatments are: 1) conventional tillage with chemically based IPM; 2) conventional tillage with biologically based IPM; 3) conservation tillage with chemically based IPM; 4) conservation tillage with biologically based IPM; and 5) conventional tillage with no fertilizer or pest management. Mid-season soil analyses with depth showed chemical-fertilized plowed and conservation-tilled treatments with more soil available nitrogen at most depths compared to the biological-based IPM systems (soybean meal was used as a nitrogen source). However, the biological-based systems did supply enough soil nitrogen to produce similar yield results as the chemical-based systems. Less soil nitrate was measured in the 30- to 90-cm depths at harvest from the biological-based systems than chemical-based systems. Conservation-tilled systems had greater nitrate with depth compared to conventional-tilled systems.


Sign in / Sign up

Export Citation Format

Share Document