Metallurgical Data on Certain Cast Armor Test Plates Tested at Aberdeen Proving Ground as a Part of the Cast Armor Low Alloy Development Program

1942 ◽  
Author(s):  
A. Hurlich ◽  
P. V. Riffin ◽  
M. Bolotsky
Author(s):  
D. N. Braski

Hastelloy-N (16%Mo-7%Cr-4%Fe-0.55%Mn-0.06%C-bal Ni) has long been a leading candidate material for a molten salt reactor. However, it was recently discovered that small amounts of Te, created by the fission process, caused grain boundary embrittlement in the structural material. Consequently, an alloy development program at this laboratory has directed considerable efforts towards modification of Hastelloy-N to improve its resistance to Te embrittlement and still retain excellent resistance to radiation damage. In this investigation, a JEOL 100C TEM with an energy dispersive x-ray spectrometer (EDX) and high resolution (50 Å) SEM attachments have been used to characterize the grain boundary surfaces of various Hastelloy-N alloys embrittled by Te.Samples of Hastelloy-N were exposed to the tellurium source, Cr3Te4, in a molten salt (LiF + BeF2 + ThF4) or to the vapor above Cr3Te4 in a closed quartz system. All corrosion tests were at 700°C. The samples were subsequently tensile tested to failure at room temperature.


1981 ◽  
Vol 103 (3) ◽  
pp. 240-245 ◽  
Author(s):  
A. M. Ermi ◽  
R. E. Bauer ◽  
B. A. Chin ◽  
J. L. Straalsund

Chains of miniature center-cracked-tension specimens were tested on a conventional testing machine and on a prototypic in-reactor fatigue machine as part of the fusion reactor materials alloy development program. Annealed and 20 percent cold-worked 316 stainless steel specimens were cycled under various conditions of temperature, frequency, stress ratio and chain length. Crack growth rates determined from multispecimen visual measurements and from an electrical potential technique were consistent with those obtained by conventional test methods. Results demonstrate that multispecimen chain testing is a valid method of obtaining fatigue crack propagation information for alloy development.


1988 ◽  
Vol 110 (4) ◽  
pp. 670-676
Author(s):  
R. R. Judkins ◽  
R. A. Bradley

The Advanced Research and Technology Development (AR&TD) Fossil Energy Materials Program is a multifaceted materials research and development program sponsored by the Office of Fossil Energy of the U.S. Department of Energy. The program is administered by the Office of Technical Coordination. In 1979, the Office of Fossil Energy assigned responsibilities for this program to the DOE Oak Ridge Operations Office (ORO) as the lead field office and Oak Ridge National Laboratory (ORNL) as the lead national laboratory. Technical activities on the program are divided into three research thrust areas: structural ceramic composites, alloy development and mechanical properties, and corrosion and erosion of alloys. In addition, assessments and technology transfer are included in a fourth thrust area. This paper provides information on the structure of the program and summarizes some of the major research activities.


Sign in / Sign up

Export Citation Format

Share Document