Probabilistic Simulation of Fatigue Crack Initiation

2001 ◽  
Author(s):  
Anthony Ingraffea
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Fatigue Crack Initiation ◽  
Probabilistic Simulation

Assessment Technology of Fatigue Crack Initiation Life of Weld Structures

2017 ◽  
Vol 86 (1) ◽  
pp. 56-58
Author(s):  
Seiichiro TSUTSUMI ◽  
Fincato RICCARDO ◽  
Mitsuru OHATA ◽  
Tomokazu SANO
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Fatigue Crack Initiation ◽  
Assessment Technology ◽  
Crack Initiation Life

scholarly journals Crack Propagation in the Tibia Bone within Total Knee Replacement Using the eXtended Finite Element Method

2021 ◽  
Vol 11 (10) ◽  
pp. 4435
Author(s):  
Ho-Quang NGUYEN ◽  
Trieu-Nhat-Thanh NGUYEN ◽  
Thinh-Quy-Duc PHAM ◽  
Van-Dung NGUYEN ◽  
Xuan Van TRAN ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Crack Propagation ◽  
Fatigue Crack Initiation ◽  
Fracture Prevention ◽  
Patient Specific ◽  
Extended Finite Element ◽  
Tibia Bone ◽  
Age Related ◽  
Final Failure

Understanding of fracture mechanics of the human knee structures within total knee replacement (TKR) allows a better decision support for bone fracture prevention. Numerous studies addressed these complex injuries involving the femur bones but the full macro-crack propagation from crack initiation to final failure and age-related effects on the tibia bone were not extensively studied. The present study aimed to develop a patient-specific model of the human tibia bone and the associated TKR implant, to study fatigue and fracture behaviors under physiological and pathological (i.e., age-related effect) conditions. Computed tomography (CT) data were used to develop a patient-specific computational model of the human tibia bone (cortical and cancellous) and associated implants. First, segmentation and 3D-reconstruction of the geometrical models of the tibia and implant were performed. Then, meshes were generated. The locations of crack initiation were identified using the clinical observation and the fatigue crack initiation model. Then, the propagation of the crack in the bone until final failure was investigated using the eXtended finite element method (X-FEM). Finally, the obtained outcomes were analyzed and evaluated to investigate the age-effects on the crack propagation behaviors of the bone. For fatigue crack initiation analysis, the stress amplitude–life S–N curve witnessed a decrease with increasing age. The maximal stress concentration caused by cyclic loading resulted in the weakening of the tibia bone under TKR. For fatigue crack propagation analysis, regarding simulation with the implant, the stress intensity factorand the energy release rate tended to decrease, as compared to the tibia model without the implant, from 0.152.5 to 0.111.9 (MPa) and from 10240 to 5133 (J), respectively. This led to the drop in crack propagation speed. This study provided, for the first time, a detailed view on the full crack path from crack initiation to final failure of the tibia bone within the TKR implant. The obtained outcomes also suggested that age (i.e., bone strength) also plays an important role in tibia crack and bone fracture. In perspective, patient-specific bone properties and dynamic loadings (e.g., during walking or running) are incorporated to provide objective and quantitative indicators for crack and fracture prevention, during daily activities.

Fatigue crack initiation and energy-based life analysis for Q345qD bridge steel at low temperatures

2021 ◽  
Vol 180 ◽  
pp. 106571
Author(s):  
Xiaowei Liao ◽  
Yuanqing Wang ◽  
Liuyang Feng ◽  
Huiyong Ban ◽  
Yong Chen
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Low Temperatures ◽  
Fatigue Crack Initiation ◽  
Bridge Steel ◽  
Life Analysis

scholarly journals Competitive relationship during fatigue-crack initiation of friction-stir-welded Al alloy

2021 ◽  
pp. 141006
Author(s):  
Zepeng Liu ◽  
Hongxia Zhang ◽  
Zhenguo Hou ◽  
Zhifeng Yan ◽  
Peter K. Liaw ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Fatigue Crack Initiation ◽  
Al Alloy ◽  
Friction Stir ◽  
Competitive Relationship

Plastic Slip and Early Stage of Fatigue Damage in Polycrystals: Comparison between Experiments and Crystal Plasticity Finite Elements Simulations

2014 ◽  
Vol 891-892 ◽  
pp. 1711-1716 ◽  
Author(s):  
Loic Signor ◽  
Emmanuel Lacoste ◽  
Patrick Villechaise ◽  
Thomas Ghidossi ◽  
Stephan Courtin
Keyword(s):  
Fatigue Crack ◽  
Finite Elements ◽  
Crack Initiation ◽  
Fatigue Damage ◽  
Crystal Plasticity ◽  
Early Stage ◽  
Low Cycle Fatigue ◽  
Fatigue Cracks ◽  
Fatigue Crack Initiation ◽  
Plastic Slip

For conventional materials with solid solution, fatigue damage is often related to microplasticity and is largely sensitive to microstructure at different scales concerning dislocations, grains and textures. The present study focuses on slip bands activity and fatigue crack initiation with special attention on the influence of the size, the morphology and the crystal orientation of grains and their neighbours. The local configurations which favour - or prevent - crack initiation are not completely identified. In this work, the identification and the analysis of several crack initiation sites are performed using Scanning Electron Microscopy and Electron Back-Scattered Diffraction. Crystal plasticity finite elements simulation is employed to evaluate local microplasticity at the scale of the grains. One of the originality of this work is the creation of 3D meshes of polycrystalline aggregates corresponding to zones where fatigue cracks have been observed. 3D data obtained by serial-sectioning are used to reconstruct actual microstructure. The role of the plastic slip activity as a driving force for fatigue crack initiation is discussed according to the comparison between experimental observations and simulations. The approach is applied to 316L type austenitic stainless steels under low-cycle fatigue loading.

Sign in / Sign up

Export Citation Format

Share Document