Adiabatic, Shock, and Plastic Work Heating of Solids and the Cylinder Test

2000 ◽  
Author(s):  
E. L. Ruden ◽  
G. F. Kiuttu
Keyword(s):  
Plastic Work ◽  
Cylinder Test ◽  
Adiabatic Shock

Ascorbic acid improves extrapyramidal syndromes and corpus striatal degeneration induced by dopamine-2 receptor inhibition in Wistar rats

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sirajo U. Mujittapha ◽  
Murtala Kauthar ◽  
Ishola O. Azeez ◽  
John C. Oyem
Keyword(s):  
Ascorbic Acid ◽  
Normal Saline ◽  
Wistar Rats ◽  
Corpus Striatum ◽  
Extrapyramidal Symptoms ◽  
Motor Deficit ◽  
Cylinder Test ◽  
Extrapyramidal Syndromes ◽  
Dopamine 2 Receptor ◽  
Inhibition Group

AbstractObjectivesThe prolonged uses of fourth-generation antipsychotics have been implicated in inducing extrapyramidal syndromes characterized by the motor deficit. This was attributed to the loss of dopamine-2 receptor (D2R) signaling. However, ascorbic acid (SVCT2R stimulation) in the brain is proposed to modulate D2R activity. We, therefore, investigated the beneficial roles of ascorbic acid in improving the extrapyramidal symptoms seen in D2R loss.MethodsTwenty adult male Wistar rats of average weight 200 g were distributed randomly into four groups. The control (NS) received normal saline for 28 days, Untreated D2R inhibition group (−D2R) received normal saline for seven days and then subsequently received chlorpromazine for 21 days, D2R inhibition group treated with ascorbic acid (−D2R+SVCT2R) received chlorpromazine for 21 days and was subsequently treated with ascorbate for seven days while the withdrawal group (WG) received chlorpromazine for 21 days and subsequently received normal saline for seven days. Motor deficits were assessed using a rotarod and cylinder test. The corpus striatum was harvested, processed, and stained using H&E and Nissl stains. Cellular density was analyzed using Image J software 1.8.0.ResultsMotor deficit was observed in −D2R animals administered chlorpromazine with less improvement in WG compared to control (p<0.05) in both rotarod and cylinder test. Ascorbic acid (SVCT2R stimulation) significantly (p<0.001) improved the latency of fall and climbing attempts observed in −D2R animals. The density of basophilic trigoid bodies was significantly (p<0.001) restored in −D2R+SVCT2R group, suggesting recovery of neural activity in the corpus striatum. Moreover, the hallmarks of neuronal degeneration were less expressed in the ascorbic acid treatment groups.ConclusionsAscorbic acid putatively ameliorates extrapyramidal symptoms observed in D2R blockage by chlorpromazine in Wistar rats.

A Transient Single Cylinder Test System for Engine Research and Control Development

2005 ◽  
Author(s):  
John L. Lahti ◽  
Matthew W. Snyder ◽  
John J. Moskwa
Keyword(s):  
Test System ◽  
Intake Manifold ◽  
Test Accuracy ◽  
Test Configuration ◽  
Single Cylinder ◽  
Cylinder Test ◽  
Single Cylinder Engine ◽  
Wide Range ◽  
Reduce Development Time ◽  
High Bandwidth

A transient test system was developed for a single cylinder research engine that greatly improves test accuracy by allowing the single cylinder to operate as though it were part of a multi-cylinder engine. The system contains two unique test components: a high bandwidth transient hydrostatic dynamometer, and an intake airflow simulator. The high bandwidth dynamometer is used to produce a speed trajectory for the single cylinder engine that is equivalent to that produced by a multi-cylinder engine. The dynamometer has high torque capacity and low inertia allowing it to simulate the speed ripple of a multi-cylinder engine while the single cylinder engine is firing. Hardware in loop models of the drivetrain and other components can be used to test the engine as though it were part of a complete vehicle, allowing standardized emissions tests to be run. The intake airflow simulator is a specialized intake manifold that uses solenoid air valves and a vacuum pump to draw air from the manifold plenum in a manner that simulates flow to other engine cylinders, which are not present in the single cylinder test configuration. By regulating this flow from the intake manifold, the pressure in the manifold and the flow through the induction system are nearly identical to that of the multi-cylinder application. The intake airflow simulator allows the intake runner wave dynamics to be more representative of the intended multi-cylinder application because the appropriate pressure trajectory is maintained in the intake manifold plenum throughout the engine cycle. The system is ideally suited for engine control development because an actual engine cylinder is used along with a test system capable of generating a wide range of transient test conditions. The ability to perform transient tests with a single cylinder engine may open up new areas of research exploring combustion and flow under transient conditions. The system can also be used for testing the engine under conditions such as cylinder deactivation, fuel cut-off, and engine restart. The improved rotational dynamics and improved intake manifold dynamics of the test system allow the single cylinder engine to be used for control development and emissions testing early in the engine development process. This can reduce development time and cost because it allows hardware problems to be identified before building more expensive multi-cylinder engines.

A Computational Investigation of Piston Bowl Geometry for a Large Bore Two-Cycle Diesel Engine

2011 ◽  
Author(s):  
Jonathan Dolak ◽  
Deep Bandyopadhyay
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Simulation Software ◽  
Spray Angle ◽  
Tier 2 ◽  
Piston Bowl ◽  
Cylinder Test ◽  
Advanced Combustion ◽  
Combustion Simulation ◽  
Reduce Emissions

The objective of this research was to optimize an Electro-Motive Diesel (EMD) large-bore, two-cycle diesel engine (710 cubic inches of displacement per cylinder) at high load to minimize soot, nitrogen oxide (NOx) and fuel consumption. The variables considered were the number of spray-hole nozzles per injector, including spray angle and piston bowl geometry, for a range of injection pressures. Analytical simulations were conducted for a calibrated EMD 710 Tier 2 engine and a few of the top-performing cases were studied in detail. CONVERGE™, a commercially available, advanced combustion simulation software was used in this analysis. A surface deforming tool, Sculptor®, was used to obtain various piston bowl geometries. MiniTab® was utilized for statistical analysis. Results show that optimal combinations of injection variables and piston bowl shape exist to simultaneously reduce emissions and fuel consumption compared to Tier 2 EMD 710 engines. These configurations will be further tested in a single-cylinder test cell and presented later. This investigation shows the importance of bowl geometry and spray targeting on emissions and fuel consumption for large-bore, two-stroke engines with high power density.

A study of indentation work in homogeneous materials

2006 ◽  
Vol 21 (6) ◽  
pp. 1363-1374 ◽  
Author(s):  
Mengxi Tan
Keyword(s):  
Plastic Deformation ◽  
Elastic Modulus ◽  
Elastic Energy ◽  
Size Effects ◽  
Unit Volume ◽  
Plastic Work ◽  
Total Work ◽  
Indentation Size ◽  
Scaling Relationships ◽  
Homogeneous Materials

The work of indentation is investigated experimentally in this article. A method of using the elastic energy to extract the elastic modulus is proposed and verified. Two types of hardness related to the work of indentation are defined and examined: Hwtis defined as the total work required creating a unit volume of contact deformationand Hwp is defined as the plastic work required creating a unit volume of plastic deformation; experiments show that both hardness definitions are good choices for characterizing hardness. Several features that may provide significant insights in understanding indentation measurements are studied. These features mainly concern some scaling relationships in indentation measurements and the indentation size effects.

Abstract T P238: Microglial CX3CR1 Required for M2 Polarization and Recovery After Intracerebral Hemorrhage

Stroke ◽  
2014 ◽  
Vol 45 (suppl_1) ◽  
Author(s):  
Roslyn A Taylor ◽  
Matthew D Hammond ◽  
Youxi Ai ◽  
Lauren H Sansing
Keyword(s):  
Bone Marrow ◽  
Flow Cytometry ◽  
Intracerebral Hemorrhage ◽  
Gait Analysis ◽  
Functional Outcome ◽  
Cylinder Test ◽  
M2 Microglia ◽  
Inflammatory Phenotype ◽  
Peripheral Leukocytes ◽  
The Right

Introduction: Intracerebral hemorrhage (ICH) results in the activation of microglia, the resident immune cells of the central nervous system. Microglia may polarize into an M1, pro-inflammatory phenotype, or an M2 phenotype associated with repair. CX3CR1 is a chemokine receptor on microglia and monocyte subsets. CX3CR1-null microglia have been shown to have dysregulated inflammation. We hypothesize that CX3CR1-null microglia have a prolonged M1 phenotype, contributing to worse functional outcome after ICH. Methods: ICH was modeled by injection of 20μl of blood into the right striatum. Neurological deficit was quantified using digital gait analysis, cylinder test, and beam walking. Mice were sacrificed 14 days after ICH; brains were harvested for flow cytometry and immunohistochemistry (IHC). C57BL/6 (WT) and CX3CR1 GFP/GFP (CX3CR1-null) mice were irradiated and reconstituted with bone marrow from WT mice carrying the congenic marker CD45.1 to generate bone marrow chimeras (CD45.1WT or CD45.1CX3CR1-null). M1 microglia were identified as expressing MHCII and M2 microglia with CD206. Results: The CD45.1CX3CR1-null mice show worse functional outcome 14 days after ICH by cylinder test (p=0.002), beam walking (p=<0.001) and gait analysis (p=0.02). By flow cytometry, few peripheral leukocytes remain in the brain at 14 days, indicating that F4/80 + and CD11b + cells visualized by IHC are likely microglia, not peripheral macrophages. By IHC, CD45.1 CX3CR1-null mice have significantly more amoeboid F4/80 + MHCII + cells per field (M1 microglia) than CD45.1WT mice (p=0.02). CD45.1 CX3CR1-null mice have significantly fewer CD11b + CD206 + cells per field (M2 microglia) compared to CD45.1WT mice (p=0.04). Conclusions: Our results suggest microglial CX3CR1 signaling is necessary for microglia to transition from M1 to M2 and contribute to recovery after ICH.

Realistic hardening-to-softening transition effects of metals over the finite strain range up to failure

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zi-Han Xu ◽  
Lin Zhan ◽  
Si-Yu Wang ◽  
Hui-Feng Xi ◽  
Heng Xiao
Keyword(s):  
Finite Strain ◽  
Plastic Work ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Trial And Error ◽  
Content Type ◽  
Transition Effects ◽  
Iterative Procedures ◽  
First Time ◽  
Hardening And Softening

PurposeA new approach is proposed toward accurately matching any given realistic hardening and softening data from uniaxial tensile test up to failure and moreover, toward bypassing usual tedious implicit trial-and-error iterative procedures in identifying numerous unknown parameters.Design/methodology/approachFinite strain response features of metals with realistic hardening-to-softening transition effects up to eventual failure are studied for the first time based on the self-consistent elastoplastic J2-flow model with the logarithmic stress rate. As contrasted with usual approximate and incomplete treatments merely considering certain particular types of hardening effects such as power type hardening, here a novel and explicit approach is proposed to obtain a complete form of the plastic-work-dependent yield strength over the whole hardening and softening range.FindingsA new multi-axial evolution equation for both hardening and softening effects is established in an explicit form. Complete results for the purpose of model validation and prediction are presented for the finite strain responses of monotonic uniaxial stretching up to failure.Originality/valueNew finite strain elastoplastic equations are established with a new history-dependent variable equivalently in place of the usual plastic work. With these equations, a unified and accurate simulation of both gardening and softening effects up to failure is achieved for the first time in an explicit sense without involving usual tedious implicit trial-and-error iterative procedures.

Sign in / Sign up

Export Citation Format

Share Document