Shear Flow Control Using Synthetic Jet Fluidic Actuator Technology

1999 ◽  
Author(s):  
Ari Glezer
Keyword(s):  
Shear Flow ◽  
Flow Control ◽  
Synthetic Jet

scholarly journals Plasma Synthetic Jet Actuators for Active Flow Control

Actuators ◽  
2018 ◽  
Vol 7 (4) ◽  
pp. 77 ◽  
Author(s):  
Haohua Zong ◽  
Matteo Chiatto ◽  
Marios Kotsonis ◽  
Luigi de Luca
Keyword(s):  
Flow Control ◽  
High Speed ◽  
High Reynolds Number ◽  
Mechanical Efficiency ◽  
Synthetic Jet ◽  
High Speed Flow ◽  
Speed Flow ◽  
Jet Actuators ◽  
Characterization Studies ◽  
High Reynolds

The plasma synthetic jet actuator (PSJA), also named as sparkjet actuator, is a special type of zero-net mass flux actuator, driven thermodynamically by pulsed arc/spark discharge. Compared to widely investigated mechanical synthetic jet actuators driven by vibrating diaphragms or oscillating pistons, PSJAs exhibit the unique capability of producing high-velocity (>300 m/s) pulsed jets at high frequency (>5 kHz), thus tailored for high-Reynolds-number high-speed flow control in aerospace engineering. This paper reviews the development of PSJA in the last 15 years, covering the major achievements in the actuator working physics (i.e., characterization in quiescent air) as well as flow control applications (i.e., interaction with external crossflow). Based on the extensive non-dimensional laws obtained in characterization studies, it becomes feasible to design an actuator under several performance constraints, based on first-principles. The peak jet velocity produced by this type of actuator scales approximately with the cubic root of the non-dimensional energy deposition, and the scaling factor is determined by the electro-mechanical efficiency of the actuator (O(0.1%–1%)). To boost the electro-mechanical efficiency, the energy losses in the gas heating phase and thermodynamic cycle process should be minimized by careful design of the discharge circuitry as well as the actuator geometry. Moreover, the limit working frequency of the actuator is set by the Helmholtz natural resonance frequency of the actuator cavity, which can be tuned by the cavity volume, exit orifice area and exit nozzle length. In contrast to the fruitful characterization studies, the application studies of PSJAs have progressed relatively slower, not only due to the inherent difficulties of performing advanced numerical simulations/measurements in high-Reynolds-number high-speed flow, but also related to the complexity of designing a reliable discharge circuit that can feed multiple actuators at high repetition rate. Notwithstanding these limitations, results from existing investigations are already sufficient to demonstrate the authority of plasma synthetic jets in shock wave boundary layer interaction control, jet noise mitigation and airfoil trailing-edge flow separation.

scholarly journals Control of flow separation over a circular cylinder using synthetic jet

2021 ◽  
Vol 2119 (1) ◽  
pp. 012025
Author(s):  
A. S. Lebedev ◽  
M. I. Sorokin ◽  
D. M. Markovich
Keyword(s):  
Circular Cylinder ◽  
Flow Control ◽  
Flow Separation ◽  
Gas Turbines ◽  
Acoustic Noise ◽  
Reverse Flow ◽  
Flow Region ◽  
Synthetic Jet ◽  
Separation Flow ◽  
Longitudinal Length

Abstract The development of methods of active separation flow control is of great applied importance for many technical and engineering applications. Understanding the conditions for the flow separation from the surface of a bluff body is essential for the design of aircrafts, cars, hydro and gas turbines, bridges and buildings. Drag, acoustic noise, vibrations and active flow mixing depend drastically on the parameters of the vortex separation process. We investigated the possibility of reducing the longitudinal length of a reverse-flow region using the method of «synthetic jet» active separation flow control. The experiment was carried out on a compact straight-through wind channel with a 1-m long test section of a cross-section of 125x125 mm. The jet was placed at the rear stagnation point of a circular cylinder. The Reynolds number, based on the cylinder diameter and the free-stream velocity, was 5000 and the von Kármán street shedding frequency without the synthetic jet was equal to 64.8 Hz. For the first time, for such a set of parameters, we applied high speed PIV to demonstrate that the injection of the synthetic jet into the cylinder wake region leads to a significant reduction in the longitudinal length of the reverse-flow region.

A comparison of different unsteady flow control techniques in a highly loaded compressor cascade

2018 ◽  
Vol 233 (6) ◽  
pp. 2051-2065 ◽  
Author(s):  
Hongxin Zhang ◽  
Shaowen Chen ◽  
Yun Gong ◽  
Songtao Wang
Keyword(s):  
Unsteady Flow ◽  
Flow Control ◽  
Flow Separation ◽  
Synthetic Jet ◽  
Control Technique ◽  
Compressor Cascade ◽  
Optimum Result ◽  
Control Techniques ◽  
Constant Suction ◽  
Highly Loaded

A numerical research is applied to investigate the effect of controlling the flow separation in a certain highly loaded compressor cascade using different unsteady flow control techniques. Firstly, unsteady pulsed suction as a new novel unsteady flow control technique was proposed and compared to steady constant suction in the control of flow separation. A more exciting effect of controlling the flow separation and enhancing the aerodynamic performance for unsteady pulsed suction was obtained compared to steady constant suction with the same time-averaged suction flow rate. Simultaneously, with the view to further exploring the potential of unsteady flow control technique, unsteady pulsed suction, unsteady pulsed blowing, and unsteady synthetic jet (three unsteady flow control techniques) are analyzed comparatively in detail by the related unsteady aerodynamic parameters such as excitation location, frequency, and amplitude. The results show that unsteady pulsed suction shows greater advantage than unsteady pulsed blowing and unsteady synthetic jet in controlling the flow separation. Unsteady pulsed suction and unsteady synthetic jet have a wider range of excitation location obtaining positive effects than unsteady pulsed blowing. The ranges of excitation frequency and excitation amplitude for unsteady pulsed suction gaining favorable effects are both much wider than that of unsteady pulsed blowing and unsteady synthetic jet. The optimum frequencies of unsteady pulsed suction, unsteady pulsed blowing, and unsteady synthetic jet are found to be different, but these optimum frequencies are all an integer multiple of the natural frequency of vortex shedding. The total pressure loss coefficient is reduced by 16.98%, 16.55%, and 17.38%, respectively, when excitation location, frequency, and amplitude are all their own optimal values for unsteady pulsed suction, unsteady pulsed blowing, and unsteady synthetic jet. The optimum result of unsteady synthetic jet only slightly outperforms that of unsteady pulsed suction and unsteady pulsed blowing. But unfortunately, there is no advantage from the standpoint of overall efficiency for the optimum result of unsteady synthetic jet because the slight improvement has to require a greater power consumption than the unsteady pulsed suction and unsteady pulsed blowing methods.

Sign in / Sign up

Export Citation Format

Share Document