Strong Bubble/Flow Interactions and Cavitation Inception.

1997 ◽  
Author(s):  
G. L. Chahine ◽  
K. Sarkar ◽  
R. Duraiswami
Keyword(s):  
Bubble Flow ◽  
Cavitation Inception ◽  
Flow Interactions

Effect of semi-open impeller side clearance on centrifugal pump cavitation inception

2018 ◽  
Vol 1 (2) ◽  
pp. 24-39
Author(s):  
A. Farid ◽  
A. Abou El-Azm Aly ◽  
H. Abdallah
Keyword(s):  
Centrifugal Pump ◽  
Static Pressure ◽  
Rotation Speed ◽  
Centrifugal Pumps ◽  
Severe Condition ◽  
Cavitation Inception ◽  
Total Input ◽  
Input Pressure ◽  
Pump Head ◽  
Pump Pressure

Cavitation in pumps is the most severe condition that centrifugal pumps can work in and is leading to a loss in their performance.  Herein, the effect of semi-open centrifugal pump side clearance on the inception of pump cavitation has been investigated.  The input pump pressure has been changed from 80 to 16 kPa and the pump side clearance has been changed from 1 mm to 3 mm at a rotation speed of 1500 rpm. It has been shown that as the total input pressure decreased; the static pressure inside the impeller is reduced while the total pressure in streamwise direction has been reduced, also the pump head is constant with the reduction of the total input pressure until the cavitation is reached. Head is reduced due to cavitation inception; the head is reduced in the case of a closed impeller with a percent of 1.5% while it is reduced with a percent of 0.5% for pump side clearance of 1mm, both are at a pressure of 20 kPa.   Results also showed that the cavitation inception in the pump had been affected and delayed with the increase of the pump side clearance; the cavitation has been noticed to occur at approximate pressures of 20 kPa for side clearance of 1mm, 18 kPa for side clearances of 2mm and 16 kPa for 3mm.

Characterization of the Bubble Flow and Transom Wave of the R/V Athena I

2007 ◽  
Author(s):  
Thomas Fu ◽  
Anna Karion ◽  
Anne Fullerton ◽  
James Rice ◽  
Don Walker
Keyword(s):  
Bubble Flow

scholarly journals Cavitation Bubble Cloud Break-Off Mechanisms at Micro-Channels

Fluids ◽  
2021 ◽  
Vol 6 (6) ◽  
pp. 215
Author(s):  
Paul McGinn ◽  
Daniel Pearce ◽  
Yannis Hardalupas ◽  
Alex Taylor ◽  
Konstantina Vogiatzaki
Keyword(s):  
Cavitation Bubble ◽  
Cavitation Inception ◽  
Wave Dynamics ◽  
Bubble Cloud ◽  
Cloud Dynamics ◽  
Micro Channels ◽  
Physical Insight ◽  
Cloud Process ◽  
Good Agreement

This paper provides new physical insight into the coupling between flow dynamics and cavitation bubble cloud behaviour at conditions relevant to both cavitation inception and the more complex phenomenon of flow “choking” using a multiphase compressible framework. Understanding the cavitation bubble cloud process and the parameters that determine its break-off frequency is important for control of phenomena such as structure vibration and erosion. Initially, the role of the pressure waves in the flow development is investigated. We highlight the differences between “physical” and “artificial” numerical waves by comparing cases with different boundary and differencing schemes. We analyse in detail the prediction of the coupling of flow and cavitation dynamics in a micro-channel 20 m high containing Diesel at pressure differences 7 MPa and 8.5 MPa, corresponding to cavitation inception and "choking" conditions respectively. The results have a very good agreement with experimental data and demonstrate that pressure wave dynamics, rather than the “re-entrant jet dynamics” suggested by previous studies, determine the characteristics of the bubble cloud dynamics under “choking” conditions.

scholarly journals Influence of wall roughness on cavitation performance of centrifugal pump

2021 ◽  
Vol 43 (6) ◽  
Author(s):  
Weihui Xu ◽  
Xiaoke He ◽  
Xiao Hou ◽  
Zhihao Huang ◽  
Weishu Wang
Keyword(s):  
Flow Field ◽  
Centrifugal Pump ◽  
Internal Flow ◽  
Wall Roughness ◽  
Blade Surface ◽  
Centrifugal Pumps ◽  
Three Dimensional Model ◽  
Cavitation Inception ◽  
Cavitation Performance ◽  
Critical Cavitation

AbstractCavitation is a phenomenon that occurs easily during rotation of fluid machinery and can decrease the performance of a pump, thereby resulting in damage to flow passage components. To study the influence of wall roughness on the cavitation performance of a centrifugal pump, a three-dimensional model of internal flow field of a centrifugal pump was constructed and a numerical simulation of cavitation in the flow field was conducted with ANSYS CFX software based on the Reynolds normalization group k-epsilon turbulence model and Zwart cavitation model. The cavitation can be further divided into four stages: cavitation inception, cavitation development, critical cavitation, and fracture cavitation. Influencing laws of wall roughness of the blade surface on the cavitation performance of a centrifugal pump were analyzed. Research results demonstrate that in the design process of centrifugal pumps, decreasing the wall roughness appropriately during the cavitation development and critical cavitation is important to effectively improve the cavitation performance of pumps. Moreover, a number of nucleation sites on the blade surface increase with the increase in wall roughness, thereby expanding the low-pressure area of the blade. Research conclusions can provide theoretical references to improve cavitation performance and optimize the structural design of the pump.

Sign in / Sign up

Export Citation Format

Share Document