AFCESA Geotechnical Centrifuge

1993 ◽  
Author(s):  
M. R. Purcell ◽  
C. R. Hollopeter
Keyword(s):  
Geotechnical Centrifuge

Earth pressures exerted on an induced trench cast-in-place double-cell rectangular box culvert

2012 ◽  
Vol 49 (11) ◽  
pp. 1267-1284 ◽  
Author(s):  
Olajide Samuel Oshati ◽  
Arun J. Valsangkar ◽  
Allison B. Schriver
Keyword(s):  
Earth Pressure ◽  
Test Results ◽  
Overburden Pressure ◽  
Centrifuge Testing ◽  
Geotechnical Centrifuge ◽  
Drag Forces ◽  
Field Instrumentation ◽  
Earth Pressures ◽  
Box Culvert ◽  
Base Contact

Earth pressure data from the field instrumentation of a cast-in-place reinforced rectangular box culvert are presented in this paper. The instrumented culvert is a 2.60 m by 3.60 m double-cell reinforced cast-in-place rectangular box buried under 25.10 m of fill constructed using the induced trench installation (ITI) method. The average earth pressure measured across the roof was 0.42 times the overburden pressure, and an average of 0.52 times the overburden pressure was measured at mid-height of the culvert on the sidewalls. Base contact pressure under the rectangular box culvert was also measured, providing field-based data demonstrating increased base pressure resulting from downward drag forces developed along the sidewalls of the box culvert. An average increase of 25% from the measured vertical earth pressures on the roof plus the culvert dead load (DL) pressure was calculated at the culvert base. A model culvert was also tested in a geotechnical centrifuge to obtain data on earth pressures at the top, sides, and base of the culvert. The data from the centrifuge testing were compared with the prototype structure, and the centrifuge test results agreed closely with the measured field prototype pressures, in spite of the fact that full similitude was not attempted in centrifuge testing.

scholarly journals Centrifuge testing of soil–structure interaction effects on cyclic failure potential of fine-grained soil

2021 ◽  
pp. 875529302098197
Author(s):  
Jason M Buenker ◽  
Scott J Brandenberg ◽  
Jonathan P Stewart
Keyword(s):  
Soil Structure ◽  
Interaction Effects ◽  
Soil Structure Interaction ◽  
Centrifuge Testing ◽  
Geotechnical Centrifuge ◽  
Structure Interaction ◽  
Fine Grained ◽  
Stiffness Properties ◽  
Fine Grained Soil ◽  
Strip Footings

We describe two experiments performed on a 9-m-radius geotechnical centrifuge to evaluate dynamic soil–structure interaction effects on the cyclic failure potential of fine-grained soil. Each experiment incorporated three different structures with a range of mass and stiffness properties. Structures were founded on strip footings embedded in a thin layer of sand overlying lightly overconsolidated low-plasticity fine-grained soil. Shaking was applied to the base of the model container, consisting of scaled versions of recorded earthquake ground motions, sweep motions, and step waves. Data recorded during testing were processed and published on the platform DesignSafe. We describe the model configuration, sensor information, shaking events, and data processing procedures and present selected processed data to illustrate key model responses and to provide a benchmark for data use.

scholarly journals Post-liquefaction reconsolidation of sand

2016 ◽  
Vol 472 (2186) ◽  
pp. 20150745 ◽  
Author(s):  
O. Adamidis ◽  
G. S. P. Madabhushi
Keyword(s):  
Void Ratio ◽  
One Dimensional ◽  
Geotechnical Centrifuge ◽  
Significant Damage ◽  
Pore Water Pressures ◽  
The One ◽  
Crucial Parameter ◽  
Excess Pore ◽  
Good Agreement ◽  
Made In

Loosely packed sand that is saturated with water can liquefy during an earthquake, potentially causing significant damage. Once the shaking is over, the excess pore water pressures that developed during the earthquake gradually dissipate, while the surface of the soil settles, in a process called post-liquefaction reconsolidation. When examining reconsolidation, the soil is typically divided in liquefied and solidified parts, which are modelled separately. The aim of this paper is to show that this fragmentation is not necessary. By assuming that the hydraulic conductivity and the one-dimensional stiffness of liquefied sand have real, positive values, the equation of consolidation can be numerically solved throughout a reconsolidating layer. Predictions made in this manner show good agreement with geotechnical centrifuge experiments. It is shown that the variation of one-dimensional stiffness with effective stress and void ratio is the most crucial parameter in accurately capturing reconsolidation.

Geotechnical Centrifuge Shaking Table Tests and Numerical Simulation of Soil-Structure

2012 ◽  
Vol 256-259 ◽  
pp. 372-376 ◽  
Author(s):  
Jing Bo Liu ◽  
Dong Dong Zhao ◽  
Wen Hui Wang ◽  
Xiang Qing Liu
Keyword(s):  
Numerical Simulation ◽  
Soil Structure ◽  
Shaking Table ◽  
Vertical Line ◽  
Shaking Table Tests ◽  
Geotechnical Centrifuge ◽  
Centrifuge Model ◽  
Soil Structures ◽  
Input Motion ◽  
Centrifuge Model Tests

Two geotechnical centrifuge model tests of a soil-structure system with different burial depths are performed to investigate the interaction between soil and structure. The tests are performed at 50 gravitational centrifuge accelerations and the input motion is Kobe wave. This paper focuses on the accelerations and displacements in the soil-structures system. The peak accelerations and displacements along the axis of the structure and along the vertical line 17cm away from the axis are presented. The acceleration and displacement response due to the interaction between soil and structure are studied.

Sign in / Sign up

Export Citation Format

Share Document