SERCAA Cloud Analysis Integration: Design Concepts and Interaction with Cloud Forecast Models

With the introduction of field-emission sources and “immersion-type” objective lenses, the resolution obtainable with modern scanning electron microscopes is approaching that obtainable in STEM and TEM-but only with specific types of specimens. Bulk specimens still suffer from the restrictions imposed by internal scattering and the need to be conducting. Advances in coating techniques have largely overcome these problems but for a sizeable body of specimens, the restrictions imposed by coating are unacceptable.For such specimens, low voltage operation, with its low beam penetration and freedom from charging artifacts, is the method of choice.Unfortunately the technical dificulties in producing an electron beam sufficiently small and of sufficient intensity are considerably greater at low beam energies — so much so that a radical reevaluation of convential design concepts is needed.The probe diameter is usually given by

Download Full-text

Experience Design Applied to Research

Conference Proceedings of the Academy for Design Innovation Management ◽

10.33114/adim.2019.04.351 ◽

2019 ◽

Vol 2 (1) ◽

Author(s):

Andrea CAPRA ◽

Ana BERGER ◽

Daniela SZABLUK ◽

Manuela OLIVEIRA

Keyword(s):

Information Technology ◽

Product Development ◽

Design Process ◽

Development Process ◽

Product Development Process ◽

Experience Design ◽

Low Resolution ◽

Design Concepts ◽

Innovative Products ◽

Technological Products

An accurate understanding of users' needs is essential for the development of innovative products. This article presents an exploratory method of user centered research in the context of the design process of technological products, conceived from the demands of a large information technology company. The method is oriented - but not restricted - to the initial stages of the product development process, and uses low-resolution prototypes and simulations of interactions, allowing users to imagine themselves in a future context through fictitious environments and scenarios in the ambit of ideation. The method is effective in identifying the requirements of the experience related to the product’s usage and allows rapid iteration on existing assumptions and greater exploration of design concepts that emerge throughout the investigation.

Download Full-text

Optimization of Process Parameters in Stir Casting of Hybrid Metal Matrix (LM25/SiC/B4C) Composite Using Taguchi Method

JOURNAL OF ADVANCES IN CHEMISTRY ◽

10.24297/jac.v13i9.5777 ◽

2017 ◽

Vol 13 (9) ◽

pp. 6475-6479

Author(s):

M. Arulraj ◽

P.K. Palani ◽

L. Venkatesh

Keyword(s):

Taguchi Method ◽

Matrix Material ◽

Base Material ◽

Stir Casting ◽

Aluminium Matrix ◽

Matrix Composites ◽

Design Concepts ◽

Specific Strength ◽

Optimization Of Process Parameters ◽

Reinforcement Material

Aluminium based composites exhibit many attractive material properties such as increased stiffness, wear resistance, specific strength and vibration damping and decreased co-efficient of thermal expansion compared with the conventional aluminium alloys. Aluminium Matrix Composites consist of non-metallic reinforcement which offers advantageous properties over base material. Reinforcements like SiC, B4C and Al2O3 are normally preferred to improve the mechanical properties. Here Aluminum LM25 is selected as matrix material while Silicon carbide and Boron carbide are selected as reinforcement material. The fabrication of aluminium matrix was done by stir casting method. In the present study an attempt has been made to investigate the effect of three major stir casting parameters (stir speed, stir duration and preheated temperature of reinforcement material) on stir casting of Aluminium LM25 - SiC - B4C composite. Experiments were conducted based on Taguchi methodology. Taguchi quality design concepts of L9 orthogonal array has been used to determine S/N ratio and through S/N ratio a set of optimum stir casting parameters were obtained. The experimental results confirmed the validity of Taguchi method for enhancing tensile strength of castings.

Download Full-text