Field-Emitter Arrays for RF Vacuum Microelectronics

1992 ◽  
Author(s):  
SRI INTERNATIONAL MENLO PARK CA
Keyword(s):  
Field Emitter ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics

Surface Modification of Si Field Emitter Arrays for Vacuum Sealing

2000 ◽  
Vol 621 ◽  
Author(s):  
M. Nagao ◽  
H. Tanabe ◽  
T. Kobayashi ◽  
T. Matsukawa ◽  
S. Kanemaru ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Vacuum Packaging ◽  
Field Emitter ◽  
Vacuum Sealing ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics ◽  
Field Emission Displays ◽  
Before And After ◽  
Heating Treatment ◽  
Field Emitter Array

ABSTRACTVacuum packaging is a very important issue for vacuum microelectronics devices, especially for field emission displays. Emission current from the field emitter array (FEA), however, is known to decrease significantly after the vacuum packaging process. The current decrease is caused by heating treatment in the vacuum sealing process. In the present paper, the effect of the heating treatment on Si FEA was investigated and CHF3 plasma treatment was proposed for avoiding the problem. The Si FEA was exposed to plasma for 15sec and emission characteristics were measured before and after the vacuum sealing process using frit. It was confirmed that CHF3 plasma treatment was very effective for avoiding the emission degradation of the Si FEA. Details of the heating damage and CHF3 plasma treatment are described.

Field-emitter arrays for vacuum microelectronics

1991 ◽  
Vol 38 (10) ◽  
pp. 2355-2363 ◽  
Author(s):  
C.A. Spindt ◽  
C.E. Holland ◽  
A. Rosengreen ◽  
I. Brodie
Keyword(s):  
Field Emitter ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics

Theoretical Analysis of Fowler Nordheim Parameterization and RLC Characteristics for Ring Cathode Field Emitter Arrays for Next Generation RF Amplifiers

1998 ◽  
Vol 509 ◽  
Author(s):  
K. L. Jensen
Keyword(s):  
Current Density ◽  
High Current Density ◽  
Drive Power ◽  
Promising Alternative ◽  
Field Emitter ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics ◽  
Average Current ◽  
Output Amplifier ◽  
Electronic Efficiency

AbstractOf all applications for which field emitter arrays (FEAs) are being designed, RF vacuum microelectronics is the most technically challenging application. The current density is typically three orders of magnitude larger than that required for displays (which require < 0.1 A/cm2). Due to their high current density capabilities and instant turn-on, FEAs may be a promising alternative to thermionic emitters for use in Inductive Output Amplifiers (IOAs). An analytical model of a field emitter is used to estimate Fowler Nordheim A and B parameters, effective resistance and capacitance of the array under several GHz modulation, signal propogation lengths, total current and current density, and effects of emitter non-uniformity on the basis of array geometry and materials. Estimates of inductance, resistance, and capacitance are made to estimate the drive power required to produce a bunched electron beam for Inductive Output Amplifier applications. An electronic efficiency of 32% with 15 dB gain may be possible from an array producing 260 mA peak, 71 mA average, current at 10 GHz using a TWT helix 1.51 cm long.

Surface Modification of Si Field Emitter Arrays for Vacuum Sealing

2000 ◽  
Vol 620 ◽  
Author(s):  
M. Nagao ◽  
H. Tanabe ◽  
T. Kobayashi ◽  
T. Matsukawa ◽  
S. Kanemaru ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Vacuum Packaging ◽  
Field Emitter ◽  
Vacuum Sealing ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics ◽  
Field Emission Displays ◽  
Before And After ◽  
Heating Treatment ◽  
Field Emitter Array

ABSTRACTVacuum packaging is a very important issue for vacuum microelectronics devices, especially for field emission displays. Emission current from the field emitter array (FEA), however, is known to decrease significantly after the vacuum packaging process. The current decrease is caused by heating treatment in the vacuum sealing process. In the present paper, the effect of the heating treatment on Si FEA was investigated and CHF3 plasma treatment was proposed for avoiding the problem. The Si FEA was exposed to plasma for 15sec and emission characteristics were measured before and after the vacuum sealing process using frit. It was confirmed that CHF3 plasma treatment was very effective for avoiding the emission degradation of the Si FEA. Details of the heating damage and CHF3 plasma treatment are described.

Field Emitter Arrays for RF Vacuum Microelectronics

1993 ◽  
Author(s):  
C. A. Spindt ◽  
A. Rosengreen ◽  
P. R. Schwoebel
Keyword(s):  
Field Emitter ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics

Integration of ZnO nanowires in gated field emitter arrays for large-area vacuum microelectronics applications

2017 ◽  
Vol 17 (1) ◽  
pp. 85-91 ◽  
Author(s):  
Long Zhao ◽  
Yuxiang Chen ◽  
Yuanming Liu ◽  
Guofu Zhang ◽  
Juncong She ◽  
...  
Keyword(s):  
Zno Nanowires ◽  
Large Area ◽  
Field Emitter ◽  
Field Emitter Arrays ◽  
Vacuum Microelectronics
Sign in / Sign up

Export Citation Format

Share Document