Nonlinear Behavior in Optical and Other Systems.

1986 ◽  
Author(s):  
Alan C. Newell
Keyword(s):  
Nonlinear Behavior

Development of a Jacobian Module for Advanced Pulp and Paper Simulation and Control

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 4-11
Author(s):  
MOHAMED CHBEL ◽  
LUC LAPERRIÈRE
Keyword(s):  
Control System ◽  
Nonlinear Behavior ◽  
Simulation Software ◽  
Pulp And Paper ◽  
Pid Controllers ◽  
Tuning Parameters ◽  
Pid Tuning ◽  
Fixed Set ◽  
And Control ◽  
Operating Points

Pulp and paper processes frequently present nonlinear behavior, which means that process dynam-ics change with the operating points. These nonlinearities can challenge process control. PID controllers are the most popular controllers because they are simple and robust. However, a fixed set of PID tuning parameters is gen-erally not sufficient to optimize control of the process. Problems related to nonlinearities such as sluggish or oscilla-tory response can arise in different operating regions. Gain scheduling is a potential solution. In processes with mul-tiple control objectives, the control strategy must further evaluate loop interactions to decide on the pairing of manipulated and controlled variables that minimize the effect of such interactions and hence, optimize controller’s performance and stability. Using the CADSIM Plus™ commercial simulation software, we developed a Jacobian sim-ulation module that enables automatic bumps on the manipulated variables to calculate process gains at different operating points. These gains can be used in controller tuning. The module also enables the control system designer to evaluate loop interactions in a multivariable control system by calculating the Relative Gain Array (RGA) matrix, of which the Jacobian is an essential part.

REDUCED MODEL OF PLASMA DISCHARGE CONTROL IN TOKAMAK WITH IRON CORE

2020 ◽  
Vol 7 (3) ◽  
pp. 11-22
Author(s):  
VALERY ANDREEV ◽  
◽  
ALEXANDER POPOV
Keyword(s):  
Optimal Control ◽  
Inverse Problem ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Nonlinear Behavior ◽  
Plasma Discharge ◽  
Reduced Model ◽  
Iron Core ◽  
Power Sources ◽  
Real Power

A reduced model has been developed to describe the time evolution of a discharge in an iron core tokamak, taking into account the nonlinear behavior of the ferromagnetic during the discharge. The calculation of the discharge scenario and program regime in the tokamak is formulated as an inverse problem - the optimal control problem. The methods for solving the problem are compared and the analysis of the correctness and stability of the control problem is carried out. A model of “quasi-optimal” control is proposed, which allows one to take into account real power sources. The discharge scenarios are calculated for the T-15 tokamak with an iron core.

Is it necessary to calculate Young’s modulus in AFM nanoindentation experiments regarding biological samples?

2020 ◽  
Vol 12 ◽  
Author(s):  
S.V. Kontomaris ◽  
A. Malamou ◽  
A. Stylianou
Keyword(s):  
Young’S Modulus ◽  
Biological Samples ◽  
Young's Modulus ◽  
Reference Sample ◽  
Nonlinear Behavior ◽  
Accurate Method ◽  
Accurate Solution ◽  
Hertz Model ◽  
Work Done

Background: The determination of the mechanical properties of biological samples using Atomic Force Microscopy (AFM) at the nanoscale is usually performed using basic models arising from the contact mechanics theory. In particular, the Hertz model is the most frequently used theoretical tool for data processing. However, the Hertz model requires several assumptions such as homogeneous and isotropic samples and indenters with perfectly spherical or conical shapes. As it is widely known, none of these requirements are 100 % fulfilled for the case of indentation experiments at the nanoscale. As a result, significant errors arise in the Young’s modulus calculation. At the same time, an analytical model that could account complexities of soft biomaterials, such as nonlinear behavior, anisotropy, and heterogeneity, may be far-reaching. In addition, this hypothetical model would be ‘too difficult’ to be applied in real clinical activities since it would require very heavy workload and highly specialized personnel. Objective: In this paper a simple solution is provided to the aforementioned dead-end. A new approach is introduced in order to provide a simple and accurate method for the mechanical characterization at the nanoscale. Method: The ratio of the work done by the indenter on the sample of interest to the work done by the indenter on a reference sample is introduced as a new physical quantity that does not require homogeneous, isotropic samples or perfect indenters. Results: The proposed approach, not only provides an accurate solution from a physical perspective but also a simpler solution which does not require activities such as the determination of the cantilever’s spring constant and the dimensions of the AFM tip. Conclusion: The proposed, by this opinion paper, solution aims to provide a significant opportunity to overcome the existing limitations provided by Hertzian mechanics and apply AFM techniques in real clinical activities.

New fourth-order convergent algorithm for analysis of trusses with material and geometric nonlinearities

2021 ◽  
pp. 030932472110005
Author(s):  
Luiz Antonio Farani de Souza ◽  
Douglas Fernandes dos Santos ◽  
Rodrigo Yukio Mizote Kawamoto ◽  
Leandro Vanalli
Keyword(s):  
Fourth Order ◽  
Nonlinear Behavior ◽  
Path Following ◽  
System Of Nonlinear Equations ◽  
The Finite Element Method ◽  
Step Method ◽  
Geometric Nonlinearities ◽  
Standard Procedures ◽  
Elastoplastic Constitutive Model ◽  
Convergent Algorithm

This paper presents a new algorithm to solve the system of nonlinear equations that describes the static equilibrium of trusses with material and geometric nonlinearities, adapting a three-step method with fourth-order convergence found in the literature. The co-rotational formulation of the Finite Element Method is used in the discretization of structures. The nonlinear behavior of the material is characterized by an elastoplastic constitutive model. The equilibrium paths with limit points of load and displacement are obtained using the linearized Arc-Length path-following technique. The numerical results obtained with the free program Scilab show that the new algorithm converges faster than standard procedures and modified Newton-Raphson, since the approximate solution of the problem is obtained with a smaller number of accumulated iterations and less CPU time. The equilibrium paths show that the structures exhibit a completely different behavior when the material nonlinearity is considered in the analysis with large displacements.

scholarly journals Dynamic Loads and Response of a Spar Buoy Wind Turbine with Pitch-Controlled Rotating Blades: An Experimental Study

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3598
Author(s):  
Sara Russo ◽  
Pasquale Contestabile ◽  
Andrea Bardazzi ◽  
Elisa Leone ◽  
Gregorio Iglesias ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Laboratory Data ◽  
Nonlinear Behavior ◽  
Offshore Wind ◽  
Small Scale ◽  
Wave Steepness ◽  
Design Factor

New large-scale laboratory data are presented on a physical model of a spar buoy wind turbine with angular motion of control surfaces implemented (pitch control). The peculiarity of this type of rotating blade represents an essential aspect when studying floating offshore wind structures. Experiments were designed specifically to compare different operational environmental conditions in terms of wave steepness and wind speed. Results discussed here were derived from an analysis of only a part of the whole dataset. Consistent with recent small-scale experiments, data clearly show that the waves contributed to most of the model motions and mooring loads. A significant nonlinear behavior for sway, roll and yaw has been detected, whereas an increase in the wave period makes the wind speed less influential for surge, heave and pitch. In general, as the steepness increases, the oscillations decrease. However, higher wind speed does not mean greater platform motions. Data also indicate a significant role of the blade rotation in the turbine thrust, nacelle dynamic forces and power in six degrees of freedom. Certain pairs of wind speed-wave steepness are particularly unfavorable, since the first harmonic of the rotor (coupled to the first wave harmonic) causes the thrust force to be larger than that in more energetic sea states. The experiments suggest that the inclusion of pitch-controlled, variable-speed blades in physical (and numerical) tests on such types of structures is crucial, highlighting the importance of pitch motion as an important design factor.

Sign in / Sign up

Export Citation Format

Share Document