Experimental Studies of Unsteady Phenomena in Boundary Layers,

1983 ◽  
Author(s):  
Mohamed Gad-el-Hak
Keyword(s):  
Boundary Layers ◽  
Experimental Studies

Experimental Studies on Wake-Induced Transition of Turbulent Boundary Layers

2012 ◽  
Author(s):  
Keiji Takeuchi ◽  
Susumu Fujimoto ◽  
Eitaro Koyabu ◽  
Tetsuhiro Tsukiji
Keyword(s):  
Boundary Layer ◽  
Flat Plate ◽  
Boundary Layers ◽  
Turbulence Intensity ◽  
Intensity Distribution ◽  
Experimental Studies ◽  
Turbulent Boundary Layers ◽  
Bypass Transition ◽  
Pressure Gradients ◽  
Hot Wire

Wake-induced bypass transition of boundary layers on a flat plate subjected to favorable and adverse pressure gradients was investigated. Detailed boundary layer measurements were conducted using two hot-wire probes. A spoked-wheel-type wake generator was used to create periodic wakes in front of the flat plate. The main focus of this study was to reveal the effect of the Strouhal number, which changed by using different numbers of wake-generating bars, on the turbulence intensity distribution and the transition onset position of the boundary layer on the flat plate using two hot-wire probes.

Numerical and Experimental Studies on Separated Boundary Layers Over Ultra-High Lift Low-Pressure Turbine Cascade Airfoils With Variable Solidity: Effects of Free-Stream Turbulence

2008 ◽  
Author(s):  
Ken-Ichi Funazaki ◽  
Kazutoyo Yamada ◽  
Yasuhiro Chiba ◽  
Nozomi Tanaka
Keyword(s):  
Boundary Layers ◽  
Free Stream ◽  
Separation Bubble ◽  
Experimental Studies ◽  
Low Pressure ◽  
Freestream Turbulence ◽  
High Lift ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine ◽  
Turbine Airfoils

This paper deals with LES investigation, along with measurements, on the interaction between inlet freestream turbulence and boundary layers with separation bubble over ultra-high lift low-pressure turbine airfoils. The cross section of the test airfoils is typical for highly-loaded LP turbines for civil aeroengines. The solidity of the cascade can be reduced by increasing the airfoil pitch by at least 25%, while maintaining the throat in the blade-to-blade passage. Reynolds number examined is 57,000, based on chord length and averaged exit velocity. Free-stream turbulence is about 0.85% (no grid condition) and 2.1% (with grid condition). Hot-wire probe measurements of the boundary layer are carried out to obtain time-averaged and time-resolved characteristics of the boundary layers under the influence of the freestream turbulence. A newly developed probe positioning tool, which is installed downstream of the cascade with minimal blockage, enables precise probe positioning along lines normal to the airfoil surface. Numerical analysis based on high-resolution LES (Large-Eddy Simulation) is executed to enhance the understanding of the flow field around the Ultra-High Lift and High Lift LP turbine airfoils. Emphasis is placed on the relationship of inherent instability of the shear layer of the separation bubble and the free-stream turbulence. Standard Smagorinsky model is employed for subgrid scale modeling. The flow solver used is an in-house code that was originally developed by one of the authors as FVM (Finite Volume Method)-based fully implicit and time-accurate Reynolds-Averaged Navier-Stokes code. Homogeneous isotropic turbulence created with SNGR (Stochastic Noise Generation and Radiation) method using von Karman-Pao turbulent energy spectrum is applied in the present study for the emulation of inlet turbulence.

scholarly journals Separated rows structure of vortex streets behind triangular objects

2019 ◽  
Vol 862 ◽  
pp. 216-226
Author(s):  
Ildoo Kim
Keyword(s):  
Boundary Layer ◽  
Thin Layer ◽  
Boundary Layers ◽  
Experimental Studies ◽  
Soap Film ◽  
Separation Distance ◽  
Two Dimensional ◽  
Spatial Structures ◽  
Physical Mechanisms ◽  
Vortex Streets

We discuss two distinct spatial structures of vortex streets. The ‘conventional mushroom’ structure is commonly discussed in many experimental studies, and the exotic ‘separated rows’ structure is characterized by a thin layer of irrotational fluid between two rows of vortices. In a two-dimensional soap film channel, we generate the exotic vortex arrangement by using triangular objects. This setting allows us to vary the thickness of boundary layers and their separation distance independently. We find that the separated rows structure appears only when the boundary layer is thinner than 40 % of the separation distance. We also discuss two physical mechanisms of the breakdown of vortex structures. The conventional mushroom structure decays due to the mixing, and the separated rows structure decays because its arrangement is hydrodynamically unstable.

scholarly journals Stability of stationary endwall boundary layers during spin-down

1996 ◽  
Vol 326 ◽  
pp. 373-398 ◽  
Author(s):  
J. M. Lopez ◽  
P. D. Weidman
Keyword(s):  
Boundary Layers ◽  
Solid Body ◽  
Experimental Studies ◽  
Steady Flows ◽  
Body Rotation ◽  
Solid Body Rotation ◽  
Centrifugal Instability ◽  
Self Similar ◽  
Layer Flow ◽  
The Stability

Since Bödewadt's (1940) seminal work on the boundary layer flow produced by a fluid in solid-body rotation over a stationary disk of infinite radius there has been much interest in determining the stability of such flows. To date, it appears that there is no theoretical study of the stability of Bödewadt's self-similar solution to perturbations that are not self-similar. Experimental studies have been compromised due to the difficulty in establishing these steady flows in the laboratory. Savaç (1983, 1987) has studied the endwall boundary layers of flow in a circular cylinder following impulsive spin-down. During the first few radians of rotation, the endwall boundary layers have a structure very similar to Bödewadt layers. For certain conditions, SavaÇ has observed a series of axisymmetric waves travelling radially inwards in the endwall boundary layers. The conjecture is that these waves represent a mode of instability of the Bödewadt layer. Within a few radians of rotation however, the centrifugal instability of the sidewall layer dominates the spin-down process and the endwall waves are difficult to examine further.Here, the impulsive spin-down problem is examined numerically for Savaç’ (1983, 1987) conditions and good agreement with his experiments is achieved. New experimental results are also presented, which include quantitative space-time information regarding the axisymmetric waves. These agree well with both the numerics and the earlier experimental work. Further, a related problem is considered numerically. This flow is also initially in solid-body rotation, but only the endwalls are impulsively stopped, keeping the sidewall rotating. This results in a flow virtually identical to the usual spin-down flow for the first few radians of rotation, except in the immediate vicinity of the sidewall. The sidewall layer is no longer centrifugally unstable and the circular waves on the endwalls are observed without the influence of the sidewall instability.

Sign in / Sign up

Export Citation Format

Share Document