Catalytic Properties of Surface Sites on Metal Oxides and Their Characterization by X-Ray Photoelectron Spectroscopy

1975 ◽  
Author(s):  
R. G. Squires ◽  
L. F. Albright ◽  
W. N. Delgass ◽  
R. A. Walton ◽  
N. Winograd
Keyword(s):  
Metal Oxides ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
X Ray ◽  
Surface Sites

Catalytic Properties of Surfaces Sites on Metal Oxides and Their Characterization by X-Ray Photoelectron Spectroscopy

1974 ◽  
Author(s):  
R. G. Squires ◽  
L. F. Albright ◽  
W. N. Delgass ◽  
R. A. Walton ◽  
N. Winograd
Keyword(s):  
Metal Oxides ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
X Ray

scholarly journals Nanostructured, mesoporous Au/TiO2 model catalysts – structure, stability and catalytic properties

2011 ◽  
Vol 2 ◽  
pp. 593-606 ◽  
Author(s):  
Matthias Roos ◽  
Dominique Böcking ◽  
Kwabena Offeh Gyimah ◽  
Gabriela Kucerova ◽  
Joachim Bansmann ◽  
...  
Keyword(s):  
Thin Film ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Model Catalysts ◽  
Model Systems ◽  
Structure Stability ◽  
Titanium Tetraisopropoxide ◽  
X Ray ◽  
Film Model ◽  
Thin Film Model

Aiming at model systems with close-to-realistic transport properties, we have prepared and studied planar Au/TiO2 thin-film model catalysts consisting of a thin mesoporous TiO2 film of 200–400 nm thickness with Au nanoparticles, with a mean particle size of ~2 nm diameter, homogeneously distributed therein. The systems were prepared by spin-coating of a mesoporous TiO2 film from solutions of ethanolic titanium tetraisopropoxide and Pluronic P123 on planar Si(100) substrates, calcination at 350 °C and subsequent Au loading by a deposition–precipitation procedure, followed by a final calcination step for catalyst activation. The structural and chemical properties of these model systems were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption, inductively coupled plasma ionization spectroscopy (ICP–OES) and X-ray photoelectron spectroscopy (XPS). The catalytic properties were evaluated through the oxidation of CO as a test reaction, and reactivities were measured directly above the film with a scanning mass spectrometer. We can demonstrate that the thin-film model catalysts closely resemble dispersed Au/TiO2 supported catalysts in their characteristic structural and catalytic properties, and hence can be considered as suitable for catalytic model studies. The linear increase of the catalytic activity with film thickness indicates that transport limitations inside the Au/TiO2 film catalyst are negligible, i.e., below the detection limit.

Structural and Catalytic Properties of the Alkali Metal Ion-Exchanged Y-Zeolites by 29Si and 27Al Solid-State NMR and FT-IR Spectroscopy

2005 ◽  
Vol 277-279 ◽  
pp. 708-719
Author(s):  
Chang Seop Lee ◽  
Hee Jung Lee ◽  
Sung Woo Choi ◽  
Jahun Kwak ◽  
Charles H.F. Peden
Keyword(s):  
Solid State ◽  
Alkali Metal ◽  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Nmr Spectra ◽  
Catalytic Properties ◽  
Nox Reduction ◽  
29Si Nmr ◽  
Y Zeolites ◽  
X Ray

A series of cation exchanged Y-zeolites were prepared by exchanging cations with various alkali (M+, M= Li, Na, K, Cs) metals. The structural and catalytic properties of the alkali metal exchanged Y-zeolites have been investigated by a number of analytical techniques. Comparative elemental analyses were determined by an Energy Dispersive Spectroscopy X-ray (EDS), X-ray Photoelectron Spectroscopy (XPS), Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) and X-ray Fluorescence (XRF) before and after cation substitution. The framework and non-framework Al coordination and the Si/Al ratios of the Y-zeolites were investigated by MAS Solid-State Nuclear Magnetic Resonance (NMR) spectroscopy. The Al NMR spectra were characterized by two 27Al resonance signals at 12 and 59 ppm, indicating the presence of the non-framework and framework Al respectively. The intensities of these resonances were used to monitor the amount of the framework and non-framework Al species in the series of exchanged zeolites. The 29Si NMR spectra were characterized by four resonance signals at -79, -84, -90, and -95 ppm. Changing the alkali metal cations in the exchanged Y-zeolites significantly altered the extent of the octahedral/tetrahedral coordination and the Si/Al ratio. The Fourier Transform Infrared spectra of the CO2 adsorbed on to the exchanged Y-zeolites showed a low frequency shift, as the atomic number of the exchanged alkali metal increased. In addition, the catalytic activity of these samples for NOx reduction were tested in combination with a non-thermal plasma technique and interpreted based on the above structural and spectroscopic information.

scholarly journals Surface Study of CuO Nanopetals by Advanced Nanocharacterization Techniques with Enhanced Optical and Catalytic Properties

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1298 ◽  
Author(s):  
Muhammad Arif Khan ◽  
Nafarizal Nayan ◽  
Shadiullah Shadiullah ◽  
Mohd Khairul Ahmad ◽  
Chin Fhong Soon
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Average Length ◽  
Tem Analysis ◽  
X Ray ◽  
Surface Study ◽  
Transmission Electron ◽  
One Step ◽  
Controlled Morphology ◽  
Xrd Patterns

In the present work, a facile one-step hydrothermal synthesis of well-defined stabilized CuO nanopetals and its surface study by advanced nanocharacterization techniques for enhanced optical and catalytic properties has been investigated. Characterization by Transmission electron microscopy (TEM) analysis confirmed existence of high crystalline CuO nanopetals with average length and diameter of 1611.96 nm and 650.50 nm, respectively. The nanopetals are monodispersed with a large surface area, controlled morphology, and demonstrate the nanocrystalline nature with a monoclinic structure. The phase purity of the as-synthesized sample was confirmed by Raman spectroscopy and X-ray diffraction (XRD) patterns. A significantly wide absorption up to 800 nm and increased band gap were observed in CuO nanopetals. The valance band (VB) and conduction band (CB) positions at CuO surface are measured to be of +0.7 and −1.03 eV, respectively, using X-ray photoelectron spectroscopy (XPS), which would be very promising for efficient catalytic properties. Furthermore, the obtained CuO nanopetals in the presence of hydrogen peroxide ( H 2 O 2 ) achieved excellent catalytic activities for degradation of methylene blue (MB) under dark, with degradation rate > 99% after 90 min, which is significantly higher than reported in the literature. The enhanced catalytic activity was referred to the controlled morphology of monodispersed CuO nanopetals, co-operative role of H 2 O 2 and energy band structure. This work contributes to a new approach for extensive application opportunities in environmental improvement.

scholarly journals Aerobic Oxidation of 5-Hydroxymethylfurfural over Ag Nanoparticle Catalysts Stabilized by Polyvinylpyrrolidone with Different Molecular Weights

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1624
Author(s):  
Haian Xia ◽  
Jiahuan An ◽  
Weizi Zhang
Keyword(s):  
Catalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Aerobic Oxidation ◽  
Ag Nps ◽  
Oxidation Activity ◽  
X Ray ◽  
Remarkable Effect ◽  
Molecular Weights ◽  
Metal Support Interaction

The metal–support interaction (MSI) has a remarkable effect on the catalytic properties, but how to precisely modulate its degree remains a huge challenge. Herein, polyvinylpyrrolidone (PVP) with three different molecular weights (MWs) (24, 58, and 130 kDa) was used as a capping agent to fabricate Ag nanoparticles (NPs) supported on ZrO2. The physiochemical properties of the catalysts were characterized by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), X-ray Photoelectron Spectroscopy (XPS), and Fourier transform infrared (FT-IR) techniques. The impacts of MSI on the catalytic activity and reaction kinetics for aerobic oxidation of 5-hydroxymethylfurfural (HMF) were investigated. The results showed that the introduction of PVP with various MWs could efficiently tailor the interfacial interactions and charge transfers (CT) among PVP, the support, and Ag NPs, thereby affecting the oxidation activity of HMF. The turnover number (TON) for HMF oxidation decreases in the order of unsupported colloidal Ag clusters > Ag/ZrO2 (58,000) > Ag/ZrO2 (130,000) > Ag/ZrO2 (24,000) > Ag/ZrO2. The reason for this large difference in the catalytic activity for HMF oxidation is that various MWs of PVP result in a change of MSI, thereby facilitating CT from PVP to Ag metal sites. This study offers a new strategy for modulating MSI by varying the MW of capping agents, thereby tuning the catalytic properties in the oxidation of HMF.

scholarly journals The Preparation and Catalytic Properties of Nanoporous Pt/CeO2 Composites with Nanorod Framework Structures

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 683 ◽  
Author(s):  
Haiyang Wang ◽  
Dong Duan ◽  
Chen Ma ◽  
Wenyu Shi ◽  
Miaomiao Liang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Structural Parameters ◽  
Active Oxygen Species ◽  
Pt Nanoparticles ◽  
Strong Interactions ◽  
X Ray ◽  
Small Pore ◽  
Melt Spun

Pt/CeO2 catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al92−XCe8PtX (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N2 adsorption–desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO2 nanorod surface and had sizes in the range of 2–5 nm. For the catalyst prepared from the melt-spun Al91.7Ce8Pt0.3 ribbons, the 50% CO conversion temperature (T50) was 91 °C, and total CO could be converted when the temperature was increased to 113 °C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt0.3/CeO2 sample had a slightly richer oxygen vacancy; and a H2 temperature-programmed reduction (H2-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO2 were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO2 and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO2 nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

scholarly journals Heterogeneous Fenton-like oxidation of p-hydroxybenzoic acid using Fe/CeO2-TiO2 catalyst

2019 ◽  
Vol 79 (7) ◽  
pp. 1276-1286 ◽  
Author(s):  
Tijani Hammedi ◽  
Mohamed Triki ◽  
Mayra G. Alvarez ◽  
Jordi Llorca ◽  
Abdelhamid Ghorbel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Molar Ratio ◽  
Hydroxybenzoic Acid ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Temperature Programmed

Abstract This paper is built on the Fenton-like oxidation of p-hydroxybenzoic acid (p–HBZ) in the presence of H2O2 and 3%Fe supported on CeO2-TiO2 aerogels under mild conditions. These catalysts were deeply characterized by X-ray diffraction (XRD), hydrogen temperature programmed reduction (H2-TPR), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) and X-ray photoelectron spectroscopy (XPS). The effect of thermal treatment, pH (2–3, 5, 7), H2O2/p–HBZ molar ratio (5, 15, 20, 25) and reaction temperature (25 °C, 40 °C and 60 °C) on the catalytic properties of supported Fe catalysts are studied. Our results highlight the role of CeO2 and the calcination of the catalyst to obtain the highest catalytic properties after 10 min: 73% of p–HBZ conversion and 52% of total organic carbon (TOC) abatement.

Synthesis of Au-SiO2 Composite Nanospheres and Their Catalytic Activity

2016 ◽  
Vol 16 (4) ◽  
pp. 3821-3826 ◽  
Author(s):  
Wang Dexuan ◽  
Li Guian ◽  
Han Qingyan ◽  
Wang Ziqiang ◽  
Pan Liping ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Photoelectron Spectroscopy ◽  
Au Nanoparticles ◽  
Catalytic Properties ◽  
Organic Dyes ◽  
Chemical Elements ◽  
X Ray ◽  
Transmission Electron ◽  
Environmentally Friendly Approach

We report a simple and environmentally friendly approach to the synthesis of Au-SiO2 composite nanospheres. Our method presents a route for the decoration of preformed amine functionalized SiO2 nanospheres by in situ formation of Au nanoparticles at three different concentrations of Au precursor (HAuCl4). Herein, the silane coupling agent (KH-550) is used as an intermediary to connect the Au nanoparticles to the surfaces of the SiO2 nanospheres, which helps avoid the aggregation of Au nanoparticles. The crystal structure, chemical elements, morphology and catalytic properties of the Au-SiO2 composite nanospheres were analyzed by transmission electron microscopy (TEM), X-Ray powder diffraction (XRD), UV-vis-spectrophotometer (UV-vis) and X-ray photoelectron spectroscopy (XPS). The analytical results demonstrate that the Au nanoparticles (4–9 nm) were homogeneously distributed on the surface of the SiO2 nanospheres, which had a good FCC crystal structure. Moreover, the Au-SiO2 composite nanospheres exhibited good catalytic properties, measured by their ability to reduce organic dyes. The Au-SiO2 composite nanospheres are promising candidates for applications in catalysis and wastewater treatment.

Sign in / Sign up

Export Citation Format

Share Document