Determining the Dynamic Bulk Modulus and the Elastic-Loss Factor of Polymers from Acoustic Measurements

1972 ◽  
Author(s):  
Jan M. Niemiec
Keyword(s):  
Bulk Modulus ◽  
Loss Factor ◽  
Acoustic Measurements ◽  
Elastic Loss

Evaluation of Acoustic Analyses of Voice in Nonoptimized Conditions

2020 ◽  
Vol 63 (12) ◽  
pp. 3991-3999
Author(s):  
Benjamin van der Woerd ◽  
Min Wu ◽  
Vijay Parsa ◽  
Philip C. Doyle ◽  
Kevin Fung
Keyword(s):  
Repeated Measures ◽  
Voice Quality ◽  
Data Sets ◽  
Acoustic Measurements ◽  
Sample Collection ◽  
Experimental Conditions ◽  
Environment Analysis ◽  
Acoustic Measures ◽  
Recording Conditions ◽  
Cepstral Peak Prominence

Objectives This study aimed to evaluate the fidelity and accuracy of a smartphone microphone and recording environment on acoustic measurements of voice. Method A prospective cohort proof-of-concept study. Two sets of prerecorded samples (a) sustained vowels (/a/) and (b) Rainbow Passage sentence were played for recording via the internal iPhone microphone and the Blue Yeti USB microphone in two recording environments: a sound-treated booth and quiet office setting. Recordings were presented using a calibrated mannequin speaker with a fixed signal intensity (69 dBA), at a fixed distance (15 in.). Each set of recordings (iPhone—audio booth, Blue Yeti—audio booth, iPhone—office, and Blue Yeti—office), was time-windowed to ensure the same signal was evaluated for each condition. Acoustic measures of voice including fundamental frequency ( f o ), jitter, shimmer, harmonic-to-noise ratio (HNR), and cepstral peak prominence (CPP), were generated using a widely used analysis program (Praat Version 6.0.50). The data gathered were compared using a repeated measures analysis of variance. Two separate data sets were used. The set of vowel samples included both pathologic ( n = 10) and normal ( n = 10), male ( n = 5) and female ( n = 15) speakers. The set of sentence stimuli ranged in perceived voice quality from normal to severely disordered with an equal number of male ( n = 12) and female ( n = 12) speakers evaluated. Results The vowel analyses indicated that the jitter, shimmer, HNR, and CPP were significantly different based on microphone choice and shimmer, HNR, and CPP were significantly different based on the recording environment. Analysis of sentences revealed a statistically significant impact of recording environment and microphone type on HNR and CPP. While statistically significant, the differences across the experimental conditions for a subset of the acoustic measures (viz., jitter and CPP) have shown differences that fell within their respective normative ranges. Conclusions Both microphone and recording setting resulted in significant differences across several acoustic measurements. However, a subset of the acoustic measures that were statistically significant across the recording conditions showed small overall differences that are unlikely to have clinical significance in interpretation. For these acoustic measures, the present data suggest that, although a sound-treated setting is ideal for voice sample collection, a smartphone microphone can capture acceptable recordings for acoustic signal analysis.

Measurements method of the audio recordings acoustic quality indicator prepared for registration and processing in the Unified Biometric System

2019 ◽  
pp. 40-46 ◽  
Author(s):  
V.V. Savchenko ◽  
A.V. Savchenko
Keyword(s):  
Quality Control ◽  
Small Sample Size ◽  
Personal Data ◽  
Digital Processing ◽  
Small Sample ◽  
Practical Implementation ◽  
Acoustic Measurements ◽  
Pitch Frequency ◽  
Wide Range ◽  
Automated Quality Control

We consider the task of automated quality control of sound recordings containing voice samples of individuals. It is shown that in this task the most acute is the small sample size. In order to overcome this problem, we propose the novel method of acoustic measurements based on relative stability of the pitch frequency within a voice sample of short duration. An example of its practical implementation using aninter-periodic accumulation of a speech signal is considered. An experimental study with specially developed software provides statistical estimates of the effectiveness of the proposed method in noisy environments. It is shown that this method rejects the audio recording as unsuitable for a voice biometric identification with a probability of 0,95 or more for a signal to noise ratio below 15 dB. The obtained results are intended for use in the development of new and modifying existing systems of collecting and automated quality control of biometric personal data. The article is intended for a wide range of specialists in the field of acoustic measurements and digital processing of speech signals, as well as for practitioners who organize the work of authorized organizations in preparing for registration samples of biometric personal data.

Charge Trapping and Degradation Properties of PZT Thin Films for MEMS

1996 ◽  
Vol 444 ◽  
Author(s):  
Hyeon-Seag Kim ◽  
D. L. Polla ◽  
S. A. Campbell
Keyword(s):  
Thin Films ◽  
Loss Factor ◽  
High Field ◽  
Microelectromechanical Systems ◽  
Charge Trapping ◽  
Metal Organic ◽  
Electrical Reliability ◽  
Silicon Based ◽  
Degradation Properties ◽  
Organic Decomposition

AbstractThe electrical reliability properties of PZT (54/46) thin films have been measured for the purpose of integrating this material with silicon-based microelectromechanical systems. Ferroelectric thin films of PZT were prepared by metal organic decomposition. The charge trapping and degradation properties of these thin films were studied through device characteristics such as hysteresis loop, leakage current, fatigue, dielectric constant, capacitancevoltage, and loss factor measurements. Several unique experimental results have been found. Different degradation processes were verified through fatigue (bipolar stress), low and high charge injection (unipolar stress), and high field stressing (unipolar stress).

Verification of the Calculation Assumptions Applied to Solutions of the Acoustic Measurements Uncertainty

2015 ◽  
Vol 39 (2) ◽  
pp. 199-202
Author(s):  
Wojciech Batko ◽  
Renata Bal
Keyword(s):  
Normal Distribution ◽  
Confidence Intervals ◽  
Uncertainty Of Measurement ◽  
Acoustic Measurements ◽  
Uncertainty In Measurement ◽  
Sound Levels ◽  
Measurement Results ◽  
Analysis Of Results ◽  
Essential Problem ◽  
Expression Of Uncertainty

Abstract The assessment of the uncertainty of measurement results, an essential problem in environmental acoustic investigations, is undertaken in the paper. An attention is drawn to the - usually omitted - problem of the verification of assumptions related to using the classic methods of the confidence intervals estimation, for the controlled measuring quantity. Especially the paper directs attention to the need of the verification of the assumption of the normal distribution of the measuring quantity set, being the base for the existing and binding procedures of the acoustic measurements assessment uncertainty. The essence of the undertaken problem concerns the binding legal and standard acts related to acoustic measurements and recommended in: 'Guide to the expression of uncertainty in measurement' (GUM) (OIML 1993), developed under the aegis of the International Bureau of Measures (BIPM). The model legitimacy of the hypothesis of the normal distribution of the measuring quantity set in acoustic measurements is discussed and supplemented by testing its likelihood on the environment acoustic results. The Jarque-Bery test based on skewness and flattening (curtosis) distribution measures was used for the analysis of results verifying the assumption. This test allows for the simultaneous analysis of the deviation from the normal distribution caused both by its skewness and flattening. The performed experiments concerned analyses of the distribution of sound levels: LD, LE, LN, LDWN, being the basic noise indicators in assessments of the environment acoustic hazards.

Usefulness of Foundry Tooling Materials in Microwave Heating Process

2013 ◽  
Vol 58 (3) ◽  
pp. 919-922 ◽  
Author(s):  
K. Granat ◽  
B. Opyd ◽  
D. Nowak ◽  
M. Stachowicz ◽  
G. Jaworski
Keyword(s):  
Electromagnetic Field ◽  
Microwave Heating ◽  
Loss Factor ◽  
Perturbation Technique ◽  
Resonant Cavity ◽  
Precise Determination ◽  
Heating Process ◽  
Basic Criterion ◽  
Measurement Results ◽  
Heating Technology

Abstract The paper describes preliminary examinations on establishing usefulness criteria of foundry tooling materials in the microwave heating technology. Presented are measurement results of permittivity and loss tangent that determine behaviour of the materials in electromagnetic field. The measurements were carried-out in a waveguide resonant cavity that permits precise determination the above-mentioned parameters by perturbation technique. Examined were five different materials designed for use in foundry tooling. Determined was the loss factor that permits evaluating usefulness of materials in microwave heating technology. It was demonstrated that the selected plastics meet the basic criterion that is transparency for electromagnetic radiation.

Sign in / Sign up

Export Citation Format

Share Document