Forced Plane Strain Motion of Cylindrical Shells-A Comparison of Shell Theory with Elasticity Theory

1970 ◽  
Author(s):  
Peter S. Pawlik ◽  
Herbert Reismann
Keyword(s):  
Elasticity Theory ◽  
Plane Strain ◽  
Shell Theory ◽  
Cylindrical Shells

Forced Plane Strain Motion of Cylindrical Shells—A Comparison of Shell Theory With Elasticity Theory

1973 ◽  
Vol 40 (3) ◽  
pp. 725-730 ◽  
Author(s):  
P. S. Pawlik ◽  
H. Reismann
Keyword(s):  
Cylindrical Shell ◽  
Analytical Solution ◽  
Elasticity Theory ◽  
Plane Strain ◽  
Outer Surface ◽  
Shell Theory ◽  
Circular Cylindrical Shell ◽  
Initial Response ◽  
Linear Elasticity Theory ◽  
Specific Loading

A radially directed load is suddenly applied to a portion of the outer surface of a circular cylindrical shell which responds in a state of plane strain. An analytical solution for the resulting dynamic response is obtained within the context of linear elasticity theory, Flu¨gge shell theory, and an “improved” shell theory. A comparison of results for specific loading conditions indicates that the improved theory is far superior to the Flu¨gge theory in terms of predicting both the magnitude and characteristics of the response. However, as expected, neither shell theory satisfactorily predicts the wave character of the initial response.

scholarly journals Vibration of rotating circular cylindrical shells with distributed springs

2021 ◽  
Vol 37 ◽  
pp. 346-358
Author(s):  
Fuchun Yang ◽  
Xiaofeng Jiang ◽  
Fuxin Du
Keyword(s):  
Boundary Conditions ◽  
Galerkin Method ◽  
Shell Theory ◽  
Rotation Speed ◽  
Cylindrical Shells ◽  
Free Vibrations ◽  
Governing Equations ◽  
Natural Response ◽  
Circular Cylindrical Shells ◽  
The Galerkin Method

Abstract Free vibrations of rotating cylindrical shells with distributed springs were studied. Based on the Flügge shell theory, the governing equations of rotating cylindrical shells with distributed springs were derived under typical boundary conditions. Multicomponent modal functions were used to satisfy the distributed springs around the circumference. The natural responses were analyzed using the Galerkin method. The effects of parameters, rotation speed, stiffness, and ratios of thickness/radius and length/radius, on natural response were also examined.

Annular Axial Flow-Induced Vibration of Cylindrical Shells by Flu¨gge’s Shell Theory

2006 ◽  
Author(s):  
Katsuhisa Fujita ◽  
Makoto Katou
Keyword(s):  
Shell Theory ◽  
Stokes Equations ◽  
Cylindrical Shells ◽  
Axial Flow ◽  
Navier Stokes ◽  
Complex Eigenvalue ◽  
Flow Induced Vibration ◽  
Navier Stokes Equations ◽  
Flowing Fluid ◽  
Narrow Passage

The unstable phenomena of thin cylindrical shells subjected to annular axial flow are investigated. In this paper, the analytical model is composed of an elastic axisymmetric shell and a rigid one which are arranged co-axially. Considering the fluid structure interaction between shells and fluid flowing through an annular narrow passage, the coupled equation of motion is derived using Flu¨gge’s shell theory and Navier-Stokes equations. The unstable phenomena of thin cylindrical shells are clarified by using the root locus based on the complex eigenvalue analysis. The numerical parameter studies on the shells with a freely supported end and a rigid one, and with both simply supported ends, are performed taking the dimensins of shells, the characteristics of flowing fluid so on as parameters. The influence of these parameters on the threshold of instability of the coupled vibration between thin cylindrical shells and annular axial flowing fluid are investigated and discussed.

A Multi-Mode Approach for the Nonlinear Vibrations of Circular Cylindrical Shells

2001 ◽  
Author(s):  
Francesco Pellicano ◽  
Marco Amabili ◽  
Michael P. Païdoussis
Keyword(s):  
Degrees Of Freedom ◽  
Nonlinear Vibrations ◽  
Shell Theory ◽  
Cylindrical Shells ◽  
Nonlinear Behavior ◽  
Symbolic Manipulation ◽  
Comparison Functions ◽  
Circular Cylindrical Shells ◽  
Multi Mode

Abstract The nonlinear vibrations of simply supported, circular cylindrical shells, having geometric nonlinearities is analyzed. Donnell’s nonlinear shallow-shell theory is used, and the partial differential equations are spatially discretized by means of the Galerkin procedure, using a large number of degrees of freedom. A symbolic manipulation code is developed for the discretization, allowing an unlimited number of modes. In the displacement expansion particular care is given to the comparison functions in order to reduce as much as possible the dimension of the dynamical system, without losing accuracy. Both driven and companion modes are included, allowing for traveling-wave response of the shell. The fundamental role of the axisymmetric modes, which are included in the expansion, is confirmed and a convergence analysis is performed. The effect of the geometric shell characteristics, radius, length and thickness, on the nonlinear behavior is analyzed.

Collapse of Thin Orthotropic Elliptical Cylindrical Shells Under Combined Bending and Pressure Loads

1979 ◽  
Vol 46 (2) ◽  
pp. 363-371 ◽  
Author(s):  
J. Spence ◽  
S. L. Toh
Keyword(s):  
Shell Theory ◽  
Nonlinear Boundary ◽  
Cylindrical Shells ◽  
Normal Pressure ◽  
Nonlinear Ordinary Differential Equations ◽  
Pure Bending ◽  
Finite Deflection ◽  
Shooting Technique ◽  
Theoretical Predictions ◽  
Thin Shell Theory

The elastic collapse of thin orthotropic elliptical cylindrical shells subject to pure bending alone or combined bending and uniform normal pressure loads has been studied. Nonlinear finite deflection thin shell theory is employed and this reduces the problem to a set of nonlinear ordinary differential equations. The resulting two-point nonlinear boundary-value problem is then linearized, using quasi-linearization, and solved numerically by the “shooting technique.” Some experimental work has been carried out and the results are compared with the theoretical predictions.

Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment

2004 ◽  
Author(s):  
U. Yuceoglu ◽  
V. O¨zerciyes
Keyword(s):  
Cylindrical Shell ◽  
Shell Theory ◽  
Natural Frequencies ◽  
Circular Cylindrical Shell ◽  
Cylindrical Shells ◽  
Adhesive Layer ◽  
Shear Stresses ◽  
First Order ◽  
Stress Resultant ◽  
Circular Cylindrical Shells

This study is concerned with the “Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment.” The base shell is made of an orthotropic “full” circular cylindrical shell reinforced and/or stiffened by an adhesively bonded dissimilar, orthotropic “full” circular cylindrical shell segment. The stiffening shell segment is located at the mid-center of the composite system. The theoretical analysis is based on the “Timoshenko-Mindlin-(and Reissner) Shell Theory” which is a “First Order Shear Deformation Shell Theory (FSDST).” Thus, in both “base (or lower) shell” and in the “upper shell” segment, the transverse shear deformations and the extensional, translational and the rotary moments of inertia are taken into account in the formulation. In the very thin and linearly elastic adhesive layer, the transverse normal and shear stresses are accounted for. The sets of the dynamic equations, stress-resultant-displacement equations for both shells and the in-between adhesive layer are combined and manipulated and are finally reduced into a ”Governing System of the First Order Ordinary Differential Equations” in the “state-vector” form. This system is integrated by the “Modified Transfer Matrix Method (with Chebyshev Polynomials).” Some asymmetric mode shapes and the corresponding natural frequencies showing the effect of the “hard” and the “soft” adhesive cases are presented. Also, the parametric study of the “overlap length” (or the bonded joint length) on the natural frequencies in several modes is considered and plotted.

Acoustic and Vibration Characteristics of Stiffened Finite Cylindrical Shells in Water under Multiple Axial-Excitations

2013 ◽  
Vol 662 ◽  
pp. 721-725
Author(s):  
Qi Zheng Zhou ◽  
De Shi Wang ◽  
Sheng Yao Gao
Keyword(s):  
Analytical Solution ◽  
Shell Theory ◽  
Acoustic Pressure ◽  
Acoustic Radiation ◽  
Cylindrical Shells ◽  
High Frequencies ◽  
Acoustic Coupling ◽  
Coupling Equations ◽  
Vibration And Sound Radiation ◽  
Thin Shell Theory

A research on the vibration and acoustic radiation of stiffened finite cylindrical shells in water under a multiple axial-excitations driven was presented. The vibro-acoustic coupling equations of shell under multiple axial-excitations based on Flügge thin shell theory were established. The displacements, surface acoustic pressure and stiffener impedances were expressed in terms of the numbers of normal modals and modes, and considering multiple excitations, the forces were expressed in terms of the numbers of normal modals and modes. Then analytical solution was derived for the vibration and sound radiation from the stiffened shell under multiple excitations. Based on the analytical solution, the influences of excitations’ positions to the vibration and acoustic radiation were investigated. The results show that for double excitations, at high frequencies, the distance between excitations was more large, the average velocity was more low. The results could be used to control the underwater vehicle’s vibration and acoustic radiation.

Sign in / Sign up

Export Citation Format

Share Document