Assessing the Impact of Oil Viscosity Mixing Rules in Cyclic Steam Stimulation of Extra-Heavy Oils

2005 ◽  
Author(s):  
Alonso Luis Mago ◽  
Maria A. Barrufet ◽  
Marjorie Nogueira
Keyword(s):  
Mixing Rules ◽  
Heavy Oils ◽  
Oil Viscosity ◽  
Cyclic Steam Stimulation ◽  
The Impact ◽  
Stimulation Of ◽  
Steam Stimulation

Study on Heating Zone and Producing Zone of Cyclic Steam Stimulation with Horizontal Well in Heavy Oil Reservoir

2012 ◽  
Vol 594-597 ◽  
pp. 2438-2441 ◽  
Author(s):  
Shi Jun Huang ◽  
Ping Hu ◽  
Qiu Li
Keyword(s):  
Heavy Oil ◽  
Horizontal Well ◽  
Thermal Recovery ◽  
Oil Reservoir ◽  
Heating Zone ◽  
Oil Viscosity ◽  
Cyclic Steam Stimulation ◽  
Heavy Oil Reservoir ◽  
Critical Viscosity ◽  
Steam Stimulation

In this paper, employing reservoir simulation and mathematical analysis methods, considering typical heavy oil reservoir and fluid thermal properties, the heating and producing shape of thermal recovery with horizontal well for different heavy oil reservoirs including ordinary, extra and super heavy oil are investigated based on the modification of thermal recovery parameters of different viscosity. By introducing heating radius and producing radius and considering the coupling effect of temperature, pressure and oil saturation fields, a quantitative expression between heating radius/producing radius and oil viscosity, formation thickness is presented, so is the impact of oil viscosity on the heating radius. Results shows that for Cyclic Steam Stimulation, the producing radius of horizontal well is bigger than its heating radius for light oil, both of which, however, shrink with higher viscosity. Beyond a critical viscosity, where the heating radius equals to the producing radius, the heating radius of horizontal well would be bigger than its producing radius. More over, the critical viscosity shows tight relationship to the formation thickness.

Study of associated gas components and combustion characteristics based on nitrogen-assisted steam stimulation of heavy oils

Fuel ◽  
2020 ◽  
Vol 282 ◽  
pp. 118819
Author(s):  
Huiting Yan ◽  
Zhenyi Liu ◽  
Jun Zhang ◽  
Fengpu Xiao ◽  
Hai Dong ◽  
...  
Keyword(s):  
Combustion Characteristics ◽  
Heavy Oils ◽  
Associated Gas ◽  
Stimulation Of ◽  
Steam Stimulation

Cyclic Steam Stimulation Effect on Skin Factor Reviewed Case Study

2016 ◽  
Vol 818 ◽  
pp. 287-290 ◽  
Author(s):  
Wan Rosli Wan Sulaiman ◽  
Azza Hashim
Keyword(s):  
Production Rate ◽  
Heavy Oil ◽  
Development Program ◽  
Thermal Recovery ◽  
Reservoir Rock ◽  
Oil Reservoir ◽  
Oil Viscosity ◽  
Cyclic Steam Stimulation ◽  
Heavy Oil Reservoir ◽  
Steam Stimulation

High oil viscosity is a major concern for recovery from heavy oil reservoir. Introducing heat to the formation has proven to be an effective way to improve mobility. The Heat transfer to the oil and reservoir rock is good for thermal recovery. The thermal recovery involves a well-known technique of cyclic steam stimulation which actually effect the nearby well area. Heavy oil reservoir which uses the thermal technique will experience the change of property. Fula North East (FNE) Sudanese field is located in the north-eastern part of Fula sub-basin. According to the development program of FNE, Bentiu layer (of Bentiu group) is the targeted reservoir where the pressure gradient is 285.65 psi/100m, perforation intervals is 540-533 m, and the average oil production rate of single well by applying the cyclic steam stimulation (CSS) is 236 bbl/d. For well- Q, (one of the hot wells) to void the bottom water the average production rate is 191 bbl/d. A minor change is observed in the key properties of the well when the skin affect is varied.

scholarly journals Half a century of continuous oil production by in-situ combustion in Romania – case study Suplacu de Barcau field

2021 ◽  
Vol 343 ◽  
pp. 09009
Author(s):  
Gheorghe Branoiu ◽  
Florinel Dinu ◽  
Maria Stoicescu ◽  
Iuliana Ghetiu ◽  
Doru Stoianovici
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Oil Production ◽  
Oil Field ◽  
Oil Reservoir ◽  
In Situ Combustion ◽  
Cyclic Steam Stimulation ◽  
The Impact ◽  
Steam Stimulation

Thermal oil recovery is a special technique belonging to Enhanced Oil Recovery (EOR) methods and includes steam flooding, cyclic steam stimulation, and in-situ combustion (fire flooding) applied especially in the heavy oil reservoirs. Starting 1970 in-situ combustion (ISC) process has been successfully applied continuously in the Suplacu de Barcau oil field, currently this one representing the most important reservoir operated by ISC in the world. Suplacu de Barcau field is a shallow clastic Pliocene, heavy oil reservoir, located in the North-Western Romania and geologically belonging to Eastern Pannonian Basin. The ISC process are operated using a linear combustion front propagated downstructure. The maximum oil production was recorded in 1985 when the total air injection rate has reached maximum values. Cyclic steam stimulation has been continuously applied as support for the ISC process and it had a significant contribution in the oil production rates. Nowadays the oil recovery factor it’s over 55 percent but significant potential has left. In the paper are presented the important moments in the life-time production of the oil field, such as production history, monitoring of the combustion process, technical challenges and their solving solutions, and scientific achievements revealed by many studies performed on the impact of the ISC process in the oil reservoir.

Sign in / Sign up

Export Citation Format

Share Document