An Approximate Theory of Water-coning in Oil Production

1935 ◽  
Vol 114 (01) ◽  
pp. 144-163 ◽  
Author(s):  
M. Muskat ◽  
R.D. Wycokoff
Keyword(s):  
Oil Production ◽  
Approximate Theory ◽  
Water Coning

scholarly journals Comparison Between Homogenous and Heterogeneous Reservoirs: A Parametric Study of Water Coning Phenomena

2021 ◽  
Vol 5 (1) ◽  
pp. 119-131
Author(s):  
Frzan F. Ali ◽  
Maha R. Hamoudi ◽  
Akram H. Abdul Wahab
Keyword(s):  
Production Rate ◽  
Oil Production ◽  
Water Production ◽  
Effective Parameters ◽  
Radial Cross Section ◽  
Heterogeneous Reservoirs ◽  
Water Breakthrough ◽  
Water Coning ◽  
Water Cut ◽  
Reservoir Simulator

Water coning is the biggest production problem mechanism in Middle East oil fields, especially in the Kurdistan Region of Iraq. When water production starts to increase, the costs of operations increase. Water production from the coning phenomena results in a reduction in recovery factor from the reservoir. Understanding the key factors impacting this problem can lead to the implementation of efficient methods to prevent and mitigate water coning. The rate of success of any method relies mainly on the ability to identify the mechanism causing the water coning. This is because several reservoir parameters can affect water coning in both homogenous and heterogeneous reservoirs. The objective of this research is to identify the parameters contributing to water coning in both homogenous and heterogeneous reservoirs. A simulation model was created to demonstrate water coning in a single- vertical well in a radial cross-section model in a commercial reservoir simulator. The sensitivity analysis was conducted on a variety of properties separately for both homogenous and heterogeneous reservoirs. The results were categorized by time to water breakthrough, oil production rate and water oil ratio. The results of the simulation work led to a number of conclusions. Firstly, production rate, perforation interval thickness and perforation depth are the most effective parameters on water coning. Secondly, time of water breakthrough is not an adequate indicator on the economic performance of the well, as the water cut is also important. Thirdly, natural fractures have significant contribution on water coning, which leads to less oil production at the end of production time when compared to a conventional reservoir with similar properties.

scholarly journals Extraction of density-layered fluid from a porous medium

2020 ◽  
Vol 61 ◽  
pp. C137-C151
Author(s):  
Jyothi Jose ◽  
Graeme Hocking ◽  
Duncan Farrow
Keyword(s):  
Porous Media ◽  
Finite Difference ◽  
Finite Difference Method ◽  
Difference Method ◽  
Axisymmetric Flow ◽  
Density Stratification ◽  
Comsol Multiphysics ◽  
Approximate Theory ◽  
Hodograph Method ◽  
Water Coning

We consider axisymmetric flow towards a point sink from a stratified fluid in a vertically confined aquifer. We present two approaches to solve the equations of flow for the linear density gradient case. Firstly, a series method results in an eigenfunction expansion in Whittaker functions. The second method is a simple finite difference method. Comparison of the two methods verifies the finite difference method is accurate, so that more complicated nonlinear, density stratification can be considered. Such nonlinear profiles cannot be considered with the eigenfunction approach. Interesting results for the case where the density stratification changes from linear to almost two-layer are presented, showing that in the nonlinear case there are certain values of flow rate for which a steady solution does not occur. References Abramowitz, M. and Stegun, I. A., Handbook of Mathematical Functions, 9th ed. National Bureau of Standards, Washington, 1972. Bear, J. and Dagan, G. Some exact solutions of interface problems by means of the hodograph method. J. Geophys. Res. 69(8):1563–1572, 1964. doi:10.1029/JZ069i008p01563 Bear, J. Dynamics of fluids in porous media. Elsevier, New York, 1972. https://store.doverpublications.com/0486656756.html COMSOL Multiphysics. COMSOL Multiphysics Programming Reference Manual, version 5.3. https://doc.comsol.com/5.3/doc/com.comsol.help.comsol/COMSOL_ProgrammingReferenceManual.pdf Farrow, D. E. and Hocking, G. C. A numerical model for withdrawal from a two layer fluid. J. Fluid Mech. 549:141–157, 2006. doi:10.1017/S0022112005007561 Henderson, N., Flores, E., Sampaio, M., Freitas, L. and Platt, G. M. Supercritical fluid flow in porous media: modelling and simulation. Chem. Eng. Sci. 60:1797–1808, 2005. doi:10.1016/j.ces.2004.11.012 Lucas, S. K., Blake, J. R. and Kucera, A. A boundary-integral method applied to water coning in oil reservoirs. ANZIAM J. 32(3):261–283, 1991. doi:10.1017/S0334270000006858 Meyer, H. I. and Garder, A. O. Mechanics of two immiscible fluids in porous media. J. Appl. Phys., 25:1400–1406, 1954. doi:10.1063/1.1721576 Muskat, M. and Wycokoff, R. D. An approximate theory of water coning in oil production. Trans. AIME 114:144–163, 1935. doi:10.2118/935144-G GNU Octave. https://www.gnu.org/software/octave/doc/v4.2.1/ Yih, C. S. On steady stratified flows in porous media. Quart. J. Appl. Maths. 40(2):219–230, 1982. doi:10.1090/qam/666676 Yu, D., Jackson, K. and Harmon, T. C. Disperson and diffusion in porous media under supercritical conditions. Chem. Eng. Sci. 54:357–367, 1999. doi:10.1016/S0009-2509(98)00271-1 Zhang, H. and Hocking, G. C. Axisymmetric flow in an oil reservoir of finite depth caused by a point sink above an oil-water interface. J. Eng. Math. 32:365–376, 1997. doi:10.1023/A:1004227232732 Zhang, H., Hocking, G. C. and Seymour, B. Critical and supercritical withdrawal from a two-layer fluid through a line sink in a bounded aquifer. Adv. Water Res. 32:1703–1710, 2009. doi:10.1016/j.advwatres.2009.09.002 Zill, D. G. and Wright, W. S. Differential Equations with Boundary-value problems, 8th Edition. Brooks Cole, Boston USA, 2013.

Investigation of gas and water coning behavior for the enhancement of oil production

2011 ◽  
Vol 28 (11) ◽  
pp. 2102-2109 ◽  
Author(s):  
Woo Cheol Lee ◽  
Young Soo Lee ◽  
Ki Hong Kim ◽  
Kye Jeong Lee ◽  
Won Mo Sung ◽  
...  
Keyword(s):  
Oil Production ◽  
Water Coning

Evaluating Water Coning Control for Horizontal Well in Bottom-Water Sandstone Reservoirs by Numerical Method

2012 ◽  
Vol 524-527 ◽  
pp. 292-296
Author(s):  
Rong Wang ◽  
Kui Zhang ◽  
Yong Gang Duan ◽  
Ting Kuan Cao
Keyword(s):  
Horizontal Well ◽  
Bottom Water ◽  
Negative Impact ◽  
Oil Production ◽  
High Water ◽  
Control Effect ◽  
Water Coning ◽  
Sandstone Reservoirs ◽  
High Water Cut Stage ◽  
Water Cut

Horizontal well is the main technology to develop bottom-water sandstone reservoirs. Water coning has a significant influence on development effect, and shut-in coning control is one of coning suppression methods. Based on the geological model of a given oilfield, this paper has made an evaluation of water coning control by numerical simulation. It can be concluded that the method of shut-in coning control is effective for low water cut wells. When shutting in, the lower the water cut is, the greater decline extent of water cut can be obtained and the higher cumulative oil production can be achieved after well reopening. The longer the close time is, the better water coning control effect can be acquired, however it will affect oil production undoubtly. When horizontal well enters into high water cut stage, shut-in coning control not only has almost no effect, but also has a negative impact on the normal oil production.

Assessment and Inclusion of Capillary Pressure/Relative Permeability Hysteresis Effects in Downhole Water Sink (DWS) Well Technology for Water Coning Control

2001 ◽  
Author(s):  
Solomon O. Inikori ◽  
Andrew K. Wojtanowicz
Keyword(s):  
Capillary Pressure ◽  
Relative Permeability ◽  
Oil Production ◽  
Well Performance ◽  
Water Drainage ◽  
Well Design ◽  
Water Coning ◽  
Capillary Pressures ◽  
Reservoir Simulator ◽  
Downhole Water Sink

Abstract The objective of this study is to assess the effects of capillary pressures and relative permeability hysteresis on the performance of wells using the downhole water sink (DWS) technology for water coning control. In the study a commercial reservoir simulator has been adopted to evaluate well performance under conditions of stabilized oil production/water drainage rates for various combinations of these rates. Operational domain of water-free oil production, Inflow Performance Window (IPW), was used to quantify the effects of capillary pressure transition zone and relative permeability hysteresis on the water coning - control performance of DWS wells. Field data from wells in Canada, West Africa and Louisiana exhibiting severe problems of water coning were used in this study. The simulation results show that the basic concept of the DWS is unchanged by the inclusion of capillary pressure and relative permeability hysteresis. However, these effects may cause considerable reduction in the size of the water-free oil production domain and lead to increase in water production. The results also indicate that, for the same reservoir, converting conventional wells with prior water coning history to DWS application would not be as beneficial as DWS completions on new wells. Thus the effect of drainage-imbibition relative permeability hysteresis should be included in the DWS well design practice.

Russian Oil: Production and Exports

2003 ◽  
pp. 136-146
Author(s):  
K. Liuhto
Keyword(s):  
Baltic Sea ◽  
Statistical Data ◽  
Oil Production ◽  
The Baltic Sea ◽  
North West ◽  
The North ◽  
Oil Transportation ◽  
Sea Ports ◽  
The Baltic

Statistical data on reserves, production and exports of Russian oil are provided in the article. The author pays special attention to the expansion of opportunities of sea oil transportation by construction of new oil terminals in the North-West of the country and first of all the largest terminal in Murmansk. In his opinion, one of the main problems in this sphere is prevention of ecological accidents in the process of oil transportation through the Baltic sea ports.

Sign in / Sign up

Export Citation Format

Share Document