New Technologies Allow Small Coiled Tubing to Complete the Work Formerly Reserved for Large Coiled Tubing Units

2004 ◽  
Author(s):  
Lance Portman
Keyword(s):  
New Technologies ◽  
Coiled Tubing

Wireless Coiled Tubing Disrupts the Industry by Enabling Use of Conventional Coil Tubing for Access and Matrix Acidizing of Multilaterals and Extended Reach Carbonate Reservoirs

2021 ◽  
Author(s):  
Abubaker Saeed ◽  
Jarl André Fellinghaug ◽  
Brett Bouldin
Keyword(s):  
New Technologies ◽  
Development Program ◽  
Monitoring And Control ◽  
Production Rates ◽  
Restricted Access ◽  
Coiled Tubing ◽  
Open Hole ◽  
Approach Method ◽  
Stimulation System ◽  
Available Technology

Abstract As the number of Extended Reach Wells (ERW) with multilaterals and restricted access due to electric submersible pumps (ESP) increases, so does the challenge to enable access and stimulation to these wells to maintain production rates. This paper describes a Slim Access and Stimulation System (SASS) development program launched to develop a game changing technology to give operators the ability to maintain high production rates in unconventional developments. There is available technology today to accurately access extended reach lateral wells, even with restricted access. But the technology is limited to logging only, as the tools and/or control wire are not acid resistant and would limit the pump rate through the coil tubing for pumping acid. The new system would require a tool suite which was acid resistant, enable slim access to the laterals, and have the ability to perform multiple stimulation jobs in one run, with monitoring and control from surface without a wire inside the coiled tubing. The SASS development program gave birth to three separate and revolutionary new technologies: two-way wireless communication and energy harvesting with integrated production logging suite, slim and high-power open hole tractor with a wire bypass to power the tool string, and semi-autonomous lateral access sub, which finds, enters, and confirms the lateral access. The three game changing technologies have application as standalone products, however the real value occurs when they combined as a Slim Access and Stimulation System, run on conventional coiled tubing. The paper will describe working methods and technology incorporated to provide access to restricted extended reach laterals and perform multiple stimulation jobs in a single run. The SASS development program is a testament of how the industry can tackle complex challenges, introducing new technologies across in multiple domains while still adapting to conventional methods. The paper highlights the full system design approach method used to understand and combine features of downhole tools, surface equipment, and operational and handling routines to achieve the overall design goal.

Design Optimization for Hydraulically Driven Agitation Tool in Extended Coiled Tubing Reach Application

2021 ◽  
Author(s):  
Hussain Saiood ◽  
Laurie Duthie ◽  
Ahmed Albaqshi ◽  
Muhammad Ahsan
Keyword(s):  
Best Practice ◽  
New Technologies ◽  
Critical Factor ◽  
Static Friction ◽  
Lessons Learned ◽  
Resistance Force ◽  
Coiled Tubing ◽  
Contact Points ◽  
The Right ◽  
Helical Buckling

Abstract As the boundaries are pushed with increased length of horizontal wells, coiled tubing (CT) well intervention capabilities are challenged requiring new technologies to expand existing capabilities. When utilizing coiled tubing, standard best practice is to first utilize CT modeling software to optimize CT size and weight for maximum reach. After choosing the right CT size, the next and most critical factor to address in extending the reach is, drag and frictional forces between the CT and the wellbore. Reducing friction and delaying helical buckling will significantly increase the reach. Several versions have been created utilizing various pressure pulse tools in the CT bottom hole assemble (BHA) to accomplish this task. These tools work by creating vibration or pressure pulses that allow for a delay in the onset of the helical buckling of CT and are widely utilized and accepted as solutions. However, existing agitation tool limitations have been reached. A newly designed and developed, hydraulically driven agitation tool (HDAT) to extend CT reach delivers continuous frequency pressure waves along the entire length of the CT. The HDAT provides a reduction in static friction and converts that to a dynamic friction form along the CT string. The continuous hydraulic agitation reduces the onset of helical buckling and thus reduces CT helical contact points, resulting in lower resistance force. The development, design, and lab testing for the HDAT has been through extensive development stages resulting in three generations of the tool, with each version providing an incrementally improved performance. The latest generation HDAT has been designed to function at optimum operational frequencies and produce excitation that works on a longer section of the CT. The performance advancement of the newly designed HDAT generation was achieved after extensive lab testing with a field run reaching a total depth of 24,500 ft over a 4,600 ft open hole lateral section. The new HDAT was redesigned to improve performance and reliability to achieve an effective matrix acid stimulation treatment. The lessons learned from previous generations were imbedded to extend the reach of the CT in the most challenging extended reach wells.

Principles of Low-Vacuum SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1304-1305
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
New Technologies ◽  
High Vacuum ◽  
Optical Microscope ◽  
Specimen Surface ◽  
Electrical Field ◽  
Gaseous Environment ◽  
New Information ◽  
Gas Molecules ◽  
New Interactions ◽  
Gas Pressures

Only recently it became possible to expand scanning electron microscopy to low vacuum and atmospheric pressure through the introduction of several new technologies. In principle, only the specimen is provided with a controlled gaseous environment while the optical microscope column is kept at high vacuum. In the specimen chamber, the gas can generate new interactions with i) the probe electrons, ii) the specimen surface, and iii) the specimen-specific signal electrons. The results of these interactions yield new information about specimen surfaces not accessible to conventional high vacuum SEM. Several microscope types are available differing from each other by the maximum available gas pressure and the types of signals which can be used for investigation of specimen properties.Electrical non-conductors can be easily imaged despite charge accumulations at and beneath their surface. At high gas pressures between 10-2 and 2 torr, gas molecules are ionized in the electrical field between the specimen surface and the surrounding microscope parts through signal electrons and, to a certain extent, probe electrons. The gas provides a stable ion flux for a surface charge equalization if sufficient gas ions are provided.

Structural dynamics of P-type ATPase ion pumps

2019 ◽  
Vol 47 (5) ◽  
pp. 1247-1257 ◽  
Author(s):  
Mateusz Dyla ◽  
Sara Basse Hansen ◽  
Poul Nissen ◽  
Magnus Kjaergaard
Keyword(s):  
Structural Dynamics ◽  
Single Molecule ◽  
New Technologies ◽  
Atp Hydrolysis ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Time Resolved ◽  
Dynamics Simulations ◽  
Types Of Information ◽  
P Type

Abstract P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

Meiotic CENP-C is a shepherd: bridging the space between the centromere and the kinetochore in time and space

2020 ◽  
Vol 64 (2) ◽  
pp. 251-261
Author(s):  
Jessica E. Fellmeth ◽  
Kim S. McKim
Keyword(s):  
Chromosome Segregation ◽  
New Technologies ◽  
Early Prophase ◽  
Unique Role ◽  
Kinetochore Assembly ◽  
M Phase ◽  
In Vivo Analysis ◽  
Meiosis I

Abstract While many of the proteins involved in the mitotic centromere and kinetochore are conserved in meiosis, they often gain a novel function due to the unique needs of homolog segregation during meiosis I (MI). CENP-C is a critical component of the centromere for kinetochore assembly in mitosis. Recent work, however, has highlighted the unique features of meiotic CENP-C. Centromere establishment and stability require CENP-C loading at the centromere for CENP-A function. Pre-meiotic loading of proteins necessary for homolog recombination as well as cohesion also rely on CENP-C, as do the main scaffolding components of the kinetochore. Much of this work relies on new technologies that enable in vivo analysis of meiosis like never before. Here, we strive to highlight the unique role of this highly conserved centromere protein that loads on to centromeres prior to M-phase onset, but continues to perform critical functions through chromosome segregation. CENP-C is not merely a structural link between the centromere and the kinetochore, but also a functional one joining the processes of early prophase homolog synapsis to late metaphase kinetochore assembly and signaling.

Recent Developments of Ambulatory Assessment Methods

2014 ◽  
Vol 25 (4) ◽  
pp. 279-287 ◽  
Author(s):  
Stefan Hey ◽  
Panagiota Anastasopoulou ◽  
André Bideaux ◽  
Wilhelm Stork
Keyword(s):  
Real Time ◽  
Information And Communication Technologies ◽  
New Technologies ◽  
Psychological Research ◽  
Ambulatory Assessment ◽  
Emotional States ◽  
Recent Developments ◽  
Potential Applications ◽  
Information And Communication ◽  
Physiological Sensors

Ambulatory assessment of emotional states as well as psychophysiological, cognitive and behavioral reactions constitutes an approach, which is increasingly being used in psychological research. Due to new developments in the field of information and communication technologies and an improved application of mobile physiological sensors, various new systems have been introduced. Methods of experience sampling allow to assess dynamic changes of subjective evaluations in real time and new sensor technologies permit a measurement of physiological responses. In addition, new technologies facilitate the interactive assessment of subjective, physiological, and behavioral data in real-time. Here, we describe these recent developments from the perspective of engineering science and discuss potential applications in the field of neuropsychology.

Into the Future: Language, Culture, and New Technologies

2000 ◽  
Vol 45 (4) ◽  
pp. 437-439
Author(s):  
Michele Knobel
Keyword(s):  
New Technologies ◽  
The Future
Sign in / Sign up

Export Citation Format

Share Document